Abstract:Pure and 1–4 at.% Ni-doped ZnO (N0Z-N4Z) nanostructures have been successfully prepared by simple and cost-effective co-precipitation method. The prepared nanostructures were studied using XRD, FESEM, HRTEM, EDX, FTIR, UV–Visible absorption and XPS techniques. The XRD study revealed that the hexagonal wurtzite structure of pure and Ni doped ZnO nanostructures, and their preferred peak growth orientation is along (101) plane without inferior phases in Ni-doped ZnO samples. The morphological investigation of Ni doped ZnO samples by FESEM and HRTEM techniques exhibited nanorods. The average diameter and length of nanorods are 25–80 nm and 140–410 nm. The results of UV–Visible absorption spectroscopy of Ni-doped ZnO nanostructures indicate red shift with varying amounts of Ni concentration. The estimated band gaps were obtained 3.11, 3.06, 3.02, 2.99 and 2.97 eV of N0Z, N1Z, N2Z, N3Z and N4Z nanostructures respectively. The NO2 gas sensing performance of fabricated N0Z-N4Z sensors were tested at different working temperatures (120–280 °C) and concentrations (5–100 ppm). Among them, the N2Z sensor showed stable, reproducible and the highest response (356%) when exposed to 100 ppm NO2 gas at 200 °C working temperature. The probable sensing mechanism of NO2 gas by Ni-doped ZnO nanostructures is investigated and discussed. Sensing response of N2Z gas sensor was also studied for 100 ppm Cl2, SO2 and H2S gases at 200 °C operating temperature and it appeared for most selective towards NO2 gas. The present study reveals that N2Z nanostructure can be attractive material as a sensor for recognition of hazardous NO2 gas at low concentrations.

Synthesis, characterization, and gas-sensing performance of macroporous Zn-doped NiO thin films for ammonia gas detection

Synthesis, characterization, and NH3 gas sensing application of Zn doped cobalt oxide nanoparticles

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Ammonia gas sensors based on undoped and Ca-doped ZnO nanoparticles

Chemical spray pyrolysis deposited ZnO/ZIF-8 and cobalt doped ZnO/ZIF-8 composite thin films for highly sensitive and selective ammonia sensing at room temperature

Synthesis and characterization of Cr-doped cadmium oxide thin films for NH3 gas-sensing applications

Synthesis and Properties of Eu and Ni Co-Doped ZnS Nanoparticles for the Detection of Ammonia Gas

Synthesis of ZnO nanorod arrays on Zn substrates by a gas–solution–solid method and their application as an ammonia sensor

Synthesis and Characterization of Flower-Like Cobalt-Doped ZnO Nanostructures for Ammonia Sensing Applications

Fabrication of Al-doped ZnO nanoparticles and their application as a semiconductor-based gas sensor for the detection of ammonia

Investigations on TiO2–NiO@In2O3 nanocomposite thin films (NCTFs) for gas sensing: synthesis, physical characterization, and detection of NO2 and H2S gas sensors

A highly sensitive and selective ZnO-based ammonia sensor: Fe- doping effect

Carbon Nanotube-ZnO Nanosphere Heterostructures: Low-Temperature Chemical Reaction Synthesis, Photoluminescence, and Their Application for Room Temperature NH 3 Gas Sensor

A selective NH3 gas sensor based on Fe2O3–ZnO nanocomposites at room temperature

Study the Effect of Ion Doping on ZnO Nanostructures for Room Temperature NH3 Gas Sensor

Fabrication and characterization of thin film CdO nanoparticles for gas sensing applications

Nanostructured NiO-polyaniline fibers composite smart material as a room temperature ammonia sensor

Al 3+ -modified ZnO thin film sensor fabricated by the sputtering method: Characterization and a carbon monoxide gas detection study

Au nanoparticle-modified ZnO/SnO2 heterojunction nanocomposites for highly sensitive detection of NH3

Enhanced NO2 gas sensing performance of Ni-doped ZnO nanostructures

Enhanced gas sensing performance of ZnO and Pt-doped ZnO nanostructured films by chemical spray pyrolysis