Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Drying-wetting impacts on granite residual soil: a multi-scale study from macroscopic to microscopic investigations

Effects of drying-wetting cycles and free iron oxides on the mechanical behaviors of a partially decomposed granite residual soils

Effects of Drying-Wetting Cycles on the Mechanical Behavior of Reconstituted Granite-Residual Soils

Effects of Drying–Wetting Cycle and Fines Content on Hysteresis and Dynamic Properties of Granite Residual Soil under Cyclic Loading

Effect of multiple wetting and drying cycles on the macropore structure of granite residual soil

Structure Degradation Induced by Wetting and Drying Cycles for the Hilly Granitic Soils in Collapsing Gully Erosion Areas

An Experimental Study with Model Calibration for the Permanent Strain of Granite Residual Soil Subgrade under Drying-Wetting Cycles

Water Retention Behavior and Shear Strength of Artificially Cemented Granite Residual Soil Subjected to Free Drying

Effect of heating–water cooling cycle treatment on the pore structure and shear fracture characteristics of granite

Study on the mechanical properties and microscopic evolution mechanisms of weathered granite soil

Mechanical characteristics and damage evolution of granite under freeze–thaw cycles

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Effects of drying–wetting cycles on small-strain stiffness characteristics of fissured clay

Assessments of Tensile Characteristics and Degradation Mechanism of Sandstone Subjected to Wetting–Drying Cyclic Treatment

Evolution of Desiccation Cracking Behavior of Clays under Drying-Wetting Cycles

Response of soil–water characteristics to pore structure of granite residual soils

Dynamic tensile characteristics of an artificial porous granite under various water saturation levels

Mechanical properties and acoustic emission characteristics of mixed granite after different numbers of freeze‒thaw cycles

Mechanical properties of structured high liquid limit clay under maximum drying stress conditions

Effects of Wetting-Drying Cycles and Desiccation Cracks on Mechanical Behavior of an Unsaturated Soil

Influence of Drying–Wetting Cycles on the Water Retention and Microstructure of Residual Soil