Abstract:Based on the three-dimensional (3D) finite element method (FEM) and Taguchi method (TM), this paper analyzes the tooth surface contact stress (TSCS) of spur gears with three different influence factors: tooth profile deviations (TPD), meshing errors (ME) and lead crowning modifications (LCM), especially researching and analyzing the interactions between TPD, ME and LCM and their degree of influence on the TSCS. In this paper, firstly, a 3D FEM model of one pair of engaged teeth is modeled and the mesh of the contact area is refined by FEM software. In the model, the refined area mesh and the non-refined area mesh are connected by multi-point constraint (MPC); at the same time, in order to save the time of the FEM solution on the premise of ensuring the solution’s accuracy, the reasonable size of the refined area is studied and confirmed. Secondly, the TSCS analyses of gears with one single influence factor (other factors are all ideal) are carried out. By inputting the values of different levels of one single factor into the FEM model, especially using the real measurement data of TPD, and conducting the TSCS analysis under different torques, the influence degree of one single factor on TSCS is discussed by comparing the ideal model, and it is found that when the influence factors exist alone, each factor has a great influence on the TSCS. Finally, through TM, an orthogonal test is designed for the three influence factors. According to the test results, the interactions between the influence factors and the influence degree of the factors on the TSCS are analyzed when the three factors exist on the gear at the same time, and it is found that the TPD has the greatest influence on the TSCS, followed by the lead crowning modified quantity. The ME is relatively much small, and there is obvious interaction between ME and LCM. In addition, the optimal combination of factor levels is determined, and compared with the original combination of a gear factory, we see that the contact fatigue performance of the gear with the optimal combination is much better. The research of this paper has a certain reference significance for the control of TPD, ME and LCM when machining and assembling the gears.

Modelling of incident light occlusion during gear measuring based on the line-structured laser sensor and analysis on its influence factors

Mathematic Model of Simultaneously Measuring Six-dimensional Parameters by Laser

Research on gear profile deviation detection method based on linear structured light

A method combining laser and vision detection for on-line measurement of small modules gears

Acquisition and Assessment of Gear Holistic Deviations Based on Laser Measurement

A Novel Method for Analyzing the Influence of Relative Attitude of Laser Profile Scanner on 3D Measurement System

Gear Profile Measurement Based on Thin Line Structured Light

An overview on line laser 3D measurement of gears

Design optical surface as the measurement datum in measuring gear tooth flank by symmetrical laser interferometer

Gear Tooth Profile Reconstruction via Geometrically Compensated Laser Triangulation Measurements

Determination of the Accuracy of the Straight Bevel Gear Profiles by a Novel Optical Coaxial Multi-Ring Measurement Method

Measurement method of tooth friction force for helical gears by laser displacement sensor

A Vision Measurement Method for the Gear Shaft Radial Runout With Line Structured Light

Research on In-Situ Measurement Technology of NC Machining Based on Line Laser Sensor

Analysis and Optimization of Tooth Surface Contact Stress of Gears with Tooth Profile Deviations, Meshing Errors and Lead Crowning Modifications Based on Finite Element Method and Taguchi Method

Automated Detection of Gear Tooth Flank Surface Integrity: A Cascade Detection Approach Using Machine Vision

A Virtual Measurement Method of the Transmission Error Based on Point Clouds of the Gear

Precise modeling of complex tooth surface microtopography and multi-degree-of-freedom nonlinear friction dynamics for high-performance face gear

A modeling and tooth contact analysis method of parabolic modified face gear

A fundamental analytical model for micro topography of skived gear surface

Measurement method of spherical radius size of differential planetary gear tooth surface based on 3D vision