Abstract:The emergence of a pandemic affecting the respiratory system can result in a significant demand for face masks. This includes the use of cloth masks by large sections of the public, as can be seen during the current global spread of COVID-19. However, there is limited knowledge available on the performance of various commonly available fabrics used in cloth masks. Importantly, there is a need to evaluate filtration efficiencies as a function of aerosol particulate sizes in the 10 nm to 10 μm range, which is particularly relevant for respiratory virus transmission. We have carried out these studies for several common fabrics including cotton, silk, chiffon, flannel, various synthetics, and their combinations. Although the filtration efficiencies for various fabrics when a single layer was used ranged from 5 to 80% and 5 to 95% for particle sizes of <300 nm and >300 nm, respectively, the efficiencies improved when multiple layers were used and when using a specific combination of different fabrics. Filtration efficiencies of the hybrids (such as cotton–silk, cotton–chiffon, cotton–flannel) was >80% (for particles <300 nm) and >90% (for particles >300 nm). We speculate that the enhanced performance of the hybrids is likely due to the combined effect of mechanical and electrostatic-based filtration. Cotton, the most widely used material for cloth masks performs better at higher weave densities (<i>i.e.</i>, thread count) and can make a significant difference in filtration efficiencies. Our studies also imply that gaps (as caused by an improper fit of the mask) can result in over a 60% decrease in the filtration efficiency, implying the need for future cloth mask design studies to take into account issues of "fit" and leakage, while allowing the exhaled air to vent efficiently. Overall, we find that combinations of various commonly available fabrics used in cloth masks can potentially provide significant protection against the transmission of aerosol particles.

High efficacy of activated carbon fabric filters and masks developed to prevent the inhalation of microorganisms and particles associated with respiratory tract infections

Electrospun Filtering Membrane Designed as Component of Self-Decontaminating Protective Masks

Biocompatibile nanofiber based membranes for high-efficiency filtration of nano-aerosols with low air resistance

Virucidal and Bactericidal Filtration Media from Electrospun Polylactic Acid Nanofibres Capable of Protecting against COVID-19

Nanocellulose-based membrane as a potential material for high performance biodegradable aerosol respirators for SARS-CoV-2 prevention: a review

Effectiveness of Common Fabrics to Block Aqueous Aerosols of COVID Virus-like Nanoparticles

Masks for COVID‐19

Filtration performances of non-medical materials as candidates for manufacturing facemasks and respirators

Development of Bifunctional Electrospun Filters Incorporating Surfactants for Enhanced Particulate Matter Filtration and Antimicrobial Activity

A novel face mask design with improved properties for COVID-19 prevention

Tri-layer gradient structured micro/nanofibrous nonwovens for high filtration efficiency and low air resistance

Aerosol Filtration Efficiency of Common Fabrics Used in Respiratory Cloth Masks

Polyvinyl alcohol/silver electrospun nanofibers: Biocidal filter media capturing virus‐size particles

Assessment and design of filters and masks against COVID-19 via modeling and simulations

Effectiveness of Common Fabrics to Block Aqueous Aerosols of Virus-like Nanoparticles

Antivirus and antibacterial filters for face masks based on silver quantum dots

Carbon Nanotube Mask Filters and Their Hydrophobic Barrier and Hyperthermic Antiviral Effects on SARS-CoV-2

Comparison of Zinc Oxide Nanoparticle Integration into Non-Woven Fabrics Using Different Functionalisation Methods for Prospective Application as Active Facemasks

Reusable Electrospun Nanofibrous Membranes with Antibacterial Activity for Air Filtration

Developing home-disinfection and filtration efficiency improvement methods for N95 respirators and surgical facial masks: stretching supplies and better protection during the ongoing COVID-19 Pandemic

Exploring advances in nanofiber-based face masks: a comprehensive review of mechanical, electrostatic, and antimicrobial functionality filtration for the removal of airborne particulate matter and pathogens