Abstract:Self-healing coatings doped by nano-containers loaded with inhibitors have shown remarkable anti-corrosion efficiency and durability in extending metal life and slowing down coating failure. However, low loading capacity of corrosion inhibitors in nano-containers is a problem plaguing the further development and application of smart coatings. In this study, mesoporous silica with large pore sizes (MSN) was synthesized using the soft template method which significantly increased the loading capacity of the corrosion inhibitor, and a smart self-healing composite coating was designed, which could protect carbon steel from corrosion and provide durable protection for it. Specifically, the composite coating (EP/DMTD@MSN-PAA) was prepared by incorporating mesoporous silica nano-containers embedded with 2,5-dimercapto-1,3,4-thiadiazole (DMTD) molecules into the epoxy resin coating. The results of BET test showed that the prepared MSNs had high specific surface area (734.97 m2/g) and large pore volume (0.85 cm3/g). The thermogravimetric (TG) analysis showed 35.7% of loading amount of corrosion inhibitors in the nano-materials. Response release experiments showed that the DMTD@MSN-PAA had of acid-response release characteristics. When pH value of the system decreased from 7 to 3, the release amount of the DMTD molecules increased from 40.3% to 93.7%. The contact angle test showed that the epoxy resin (EP) coating had a contact angle value of 57.7°, while those of the composite coatings doped with 1 wt%, 3 wt% and 6 wt% DMTD@MSN-PAA (EP/DMTD@MSN-PAA) were 65.1°, 75.2° and 67.2°, respectively. These results indicated that the composite coatings had better hydrophobicity compared to the EP coating, and were conducive to prolonging the coating service time. The anti-corrosion performances of both the EP and the composite coatings with different doping amounts of DMTD@MSN-PAA were evaluated by EIS measurements. The R ct value of the EP coating decreased from 190.3 to 25.1 Ω · cm2 within the time of 48 h of immersion in 3.5 wt% NaCl solution, while ones of the EP/DMTD@MSN-PAA coatings doped with 1 wt%, 3 wt% and 6 wt% of DMTD@MSN-PAA increased from 303.1, 720.7.7, 523.4–1426.4, 2113.8, 1066.3 Ω · cm2, respectively. In addition, the corrosion resistance of the EP and composite coatings were further evaluated by etching experiments. The results showed that after 35 d of immersion, compared with that of the EP coating, surface corrosion degree of the composite coatings was lower, and the scaling off speed of the coatings slowed down, which further proved that the composite coating had strong corrosion resistance and special self-healing characteristics.

Improvement in Corrosion Resistance and Mechanical Properties of Epoxy Coatings on Steel with the Addition of Thiadiazole Treated ZrC

Application of EIS and SECM Studies for Investigation of Anticorrosion Properties of Epoxy Coatings containing ZrO2 Nanoparticles on Mild Steel in 3.5% NaCl Solution

Influence of TiO 2 -MWCNTs nanohybrid material on the corrosion resistance of epoxy low-zinc coatings

Electrochemical and dynamic mechanical properties of polyurethane nanocomposite reinforced with functionalized TiO2–ZrO2 nanoparticles in automobile industry

Enrichment of epoxy coating on amalgamation with corrosion-resistant poly (2,3-benzopyrrole)/zinc oxide nanoflowers (PBZNF) synthesized composite for carbon steel alloy featuring excellent hydrophobicity

Modified epoxy coatings based on BI@ZIF-8@TA for the application of long-effective corrosion protection

Novel multifunctional epoxy based graphitic carbon nitride/silanized TiO2 nanocomposite as protective coatings for steel surface against corrosion and flame in the shipping industry

Improvement of the Abrasion and Corrosion Resistance of a Waterborne Epoxy Coating by α-ZrP@PTA-Ce(III) with Dual Corrosion Inhibition Effects

Exploring the corrosion resistance of epoxy coated steel by integrating mechanochemical synthesized 2D covalent organic framework

Polydopamine-modified Ti3C2Tx to enhance anticorrosion of waterborne zinc-rich epoxy coating

Multifunctional graphitic carbon nitride/manganese dioxide/epoxy nanocomposite coating on steel for enhanced anticorrosion, flame retardant, mechanical, and hydrophobic properties

Enhanced Protective Performance of Carbon Nanotube-Reinforced Waterborne Epoxy Zinc-Rich Coatings for Corrosion Protection of Steel Structures

Enhancing anticorrosive performance of epoxy‐based ZnO nanocomposite coatings via 3‐(trimethoxysilyl)propyl methacrylate modification

One-Pot Fabrication of an MXene-ZrP@PDA Heterojunction for Enhanced Corrosion/Wear Resistance of Waterborne Epoxy Coatings

Novel multilayer structural epoxy composite coating containing graphene oxide and silanized chromium carbide for the protection of steel structures

Effectiveness of Epoxy Coating Modified with Yttrium Oxide Loaded with Imidazole on the Corrosion Protection of Steel

Evaluation of Mechanical Properties and Corrosion Protection Performance of Surface Modified Nano-alumina Encapsulated Epoxy Coated Mild Steel

Assessment of Anticorrosion Performance of Zinc-Rich Epoxy Coatings Added with Zinc Fibers for Corrosion Protection of Steel

Tailoring epoxy coating with acetoxime derivative of zinc for advanced anticorrosive performance on mild steel: experimental and computational insights

Developing epoxy-based anti-corrosion functional nanocomposite coating with CaFe-Tolyl-triazole layered double hydroxide@g-C3N4 as nanofillers on Q235 steel substrate against NaCl corrosive environment

Smart nanoarchitectonics of epoxy coating: Preparation, release behavior and self-healing performance based on mesoporous silica nano-containers loaded with DMTD inhibitors