Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Mechanical and thermal properties of fully green composites from vanillin-based benzoxazine and silane surface modified chopped basalt fibers

High performance green composite from vanillin-based benzoxazine containing phthalonitrile and silane surface modified basalt fibers

Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating

Multifunctional Hybrid Composites with Enhanced Mechanical and Thermal Properties Based on Polybenzoxazine and Chopped Kevlar/Carbon Hybrid Fibers

Towards sustainable reprocessable structural composites: Benzoxazines as biobased matrices for natural fibers

Development of chopped glass fiber composites with difunctional benzoxazine and bio‐based phthalonitrile copolymer: A study of mechanical and thermomechanical properties

Nature's Empowerment: Unraveling Superior Performance and Green Degradation Closure in Self-Curing Fully Bio-based Benzoxazine

Mechanical and Thermal Enhancements of Benzoxazine‐based GF Composite Laminated by in Situ Reaction with Carboxyl Functionalized CNTs

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Highly advanced phthalonitrile composites from epoxy‐ended hyperbranched poly(trimellitic anhydride ethylene glycol) ester grafted basalt fibers

Fire-safe composites made from bio-derived and difunctional benzoxazine hybridized matrix reinforced with Pistachio shell particles

Synergetic control of multi‐level interface structure of basalt fibers by plasma and chemical functionalization to enhance the mechanical, thermal and interfacial performances of PBZ composites

Synthesis and characterization of vanillin derived bio-based benzoxazine resin for high temperature application

Mechanical properties, thermal stability, and mechanism of main‐chain polybenzoxazine composites fabricated based on multi‐scale effects and surface functionalization of graphene oxide nanosheets

High‐performance main‐chain polybenzoxazine composites by incorporating multi‐walled carbon nanotubes with different surfacial structure: Mechanical properties, thermal stability and mechanisms

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Mechanical Properties of Hybrid Graphene Nanoplatelet-Nanosilica Filled Unidirectional Basalt Fibre Composites

High strength, self-healing and hydrophobic fully bio-based polybenzoxazine reinforced pine oleoresin-based vitrimer and its application in carbon fiber reinforced polymers

Mechanical and Thermal Properties of Basalt Fiber Reinforced Poly(butylene Succinate) Composites

Synthesis and characterization of new polybenzoxazines from renewable resources for bio-composite applications