Abstract:The mechanical performances and functionalities of pavements are significantly dependent on their service temperatures. It is of great importance to understand the temperature distributions of pavements under various environmental conditions and the influence mechanisms caused by the environmental media, and accurate and effective estimations of the pavement temperature field in both spatial and temporal dimensions is desired to better predict pavement responses and for a proper pavement design. However, as well known, the temperature distribution in a pavement structure is greatly affected by the paving material and strongly correlated environmental factors, and it is hard to be measured in the field effectively. In this study, numerical simulations based on finite element analysis (FEA) were performed to investigate the temperature distributions of pavements with various paving materials spatially and temporally, and the influences caused by typical environmental media on actual pavements were also discussed based on the simulation results. Four commonly used paving materials, traditional Portland cement concrete (PCC), Portland cement porous concrete (PCPC), dense-graded asphalt concrete (AC), and open-graded friction course (OGFC), were considered for the study. The intensity of solar radiation during daytime and night and wind speed were two environmental factors take into consideration as the environmental media that affect the temperature distributions of the pavement. On the other hand, a series laboratory simulation tests were conducted on the specimens made by various paving materials, and the results from the numerical analysis were compared to those from the laboratory tests in order to verify the effectiveness of the numerical model established in the study. Furthermore, the mechanisms of the environmental media impacting the temperature distributions of the pavements were explored.

Economic strategies for low-temperature transportation of asphalt pavement: a comparative analysis of temperature variations

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Investigation of Viscoelastic Properties of Polymer-Modified Asphalt at Low Temperature Based on Gray Relational Analysis

Low-temperature Performance of Asphalt Mixture Based on Statistical Analysis of Winter Temperature Extremes: A Case Study of Harbin China

Influence of Temperature on the Mechanical Response of Asphalt Mixtures Using Microstructural Analysis and Finite-Element Simulations

Impact of Asphalt Pavement Thermophysical Property on Temperature Field and Sensitivity Analysis

Thermal-Mechanical Coupling Analysis of Permeable Asphalt Pavements

Temperature Field of Asphalt Pavement in Seasonal Frozen Region Suffered by Freeze-Thaw Cycles

2D temperature field analysis of asphalt pavements with three different types of subgrade structures

Characterization of the thermo-mechanical behaviour of the asphalt mixture by microstructural analysis and FE simulation

Temperature Spatial and Temporal Distributions of Pavements with Various Paving Materials

Mechanism and structure of micro-nanofluid directional heat conduction in asphalt pavement in plateau permafrost regions

Design parameter of low-temperature performance for asphalt mixtures in cold regions

Predicting the Low-Temperature Performance of Asphalt Binder Based on Rheological Model

Research on the Road Performance of Asphalt Mixtures Based on Infrared Thermography

Temperature Changes of Interlaminar Bonding Layer in Different Seasons and Effects on Mechanical Properties of Asphalt Pavement

Influence of temperature and humidity coupling on rutting deformation of asphalt pavement

Thermal Performance of a Layered Asphalt Pavement System for Snow Melting

Research on Paving Temperature Segregation and Rolling Uniformity Evaluation Method of Asphalt Pavement

Experimental investigation on performance of composite thermochromic and ice-melting coatings for dynamic pavement temperature control

Asphalt pavement heat insulation bonding layer materials: Composition optimization and engineering application