Abstract:Chemical vapor deposition was used to produce multi-walled carbon nanotubes (MWCNTs), which were modified by Fe–Ni/AC catalysts to enhance CO 2 adsorption. In this study, a new realm of possibilities and potential advancements in CO 2 capture technology is unveiled through the unique combination of cutting-edge modeling techniques and utilization of the recently synthesized Fe–Ni/AC catalyst adsorbent. SEM, BET, and FTIR were used to analyze their structure and morphology. The surface area of MWCNT was found to be 240 m 2 /g, but after modification, it was reduced to 11 m 2 /g. The modified MWCNT showed increased adsorption capacity with higher pressure and lower temperature, due to the introduction of new adsorption sites and favorable interactions at lower temperatures. At 25 °C and 10 bar, it reached a maximum adsorption capacity of 424.08 mg/g. The optimal values of the pressure, time, and temperature parameters were achieved at 7 bar, 2646 S and 313 K. The Freundlich and Hill models had the highest correlation with the experimental data. The Second-Order and Fractional Order kinetic models fit the adsorption results well. The adsorption process was found to be exothermic and spontaneous. The modified MWCNT has the potential for efficient gas adsorption in fields like gas storage or separation. The regenerated M-MWCNT adsorbent demonstrated the ability to be reused multiple times for the CO 2 adsorption process, as evidenced by the study. In this study, a feed-forward MLP artificial neural network model was created using a back-propagation training approach to predict CO 2 adsorption. The most suitable and efficient MLP network structure, selected for optimization, consisted of two hidden layers with 25 and 10 neurons, respectively. This network was trained using the Levenberg–Marquardt backpropagation algorithm. An MLP artificial neural network model was created, with a minimum MSE performance of 0.0004247 and an R 2 value of 0.99904, indicating its accuracy. The experiment also utilized the blank spreadsheet design within the framework of response surface methodology to predict CO 2 adsorption. The proximity between the Predicted R 2 value of 0.8899 and the Adjusted R 2 value of 0.9016, with a difference of less than 0.2, indicates a high level of similarity. This suggests that the model is exceptionally reliable in its ability to predict future observations, highlighting its robustness.

The prediction of CO2 adsorption on rice husk activated carbons via deep learning neural network

Prediction of Carbon Dioxide Adsorption Via Deep Learning.

Applied Machine Learning to Analyze and Predict CO2 Adsorption Behavior of Metal-Organic Frameworks

Optimal Activation of Porous Carbon for High Performance CO2 Capture

Applied Machine Learning For Prediction Of Co2 Adsorption On Biomass Waste-Derived Porous Carbons

Applied Machine Learning for Prediction of CO 2 Adsorption on Biomass Waste-Derived Porous Carbons

Prediction of $\textrm{CO}_2$ Adsorption in Nano-Pores with Graph Neural Networks

Model for Predicting CO2 Adsorption in Coal Left in Goaf Based on Backpropagation Neural Network

Direct Prediction of Gas Adsorption Via Spatial Atom Interaction Learning

Machine learning exploration of the critical factors for CO2 adsorption capacity on porous carbon materials at different pressures

Explainable machine learning for carbon dioxide adsorption on porous carbon

Comprehensive investigation of isotherm, RSM, and ANN modeling of CO2 capture by multi-walled carbon nanotube

Adsorption of Multicomponent VOCs on Various Biomass-Derived Hierarchical Porous Carbon: A Study on Adsorption Mechanism and Competitive Effect.

Preparation of Nanoporous Carbon from Rice Husk with Improved Textural Characteristics for Hydrogen Sorption

Dye adsorption of mesoporous activated carbons produced from NaOH-pretreated rice husks.

Designing microporous activated carbons from biomass for carbon dioxide adsorption at ambient temperature. A comparison between bagasse and rice by-products

Machine learning prediction of physical properties and nitrogen content of porous carbon from agricultural wastes: Effects of activation and doping process

Modeling indoor air carbon dioxide concentration using artificial neural network

Machine Learning-Based Prediction of the Adsorption Characteristics of Biochar from Waste Wood by Chemical Activation

Graph Neural Networks for Carbon Dioxide Adsorption Prediction in Aluminum-Substituted Zeolites

Graph Neural Networks for Carbon Dioxide Adsorption Prediction in Aluminium-Exchanged Zeolites