Abstract:Natural fibers, such as wood fibers, can substitute for synthetic fibers in various applications due to their low environmental impact, cost-effectiveness, and outstanding mechanical properties as rapid-growing materials and renewable resources. This paper aims to investigate the mechanical properties of 20% wood fiber as a reinforcement material in polylactic acid (PLA) using an additive manufacturing approach. The samples were fabricated using 3D printing techniques. The relevant parameters included the orientation of printing in X, Y, and Z directions, with the percentage of infill set to be 100%. The findings indicated that bio-composites and their adopted printing orientations confirmed the significant effects on the mechanical properties. Pure PLA possessed superior properties in all directions compared to wood/PLA. The highest values were 50.33 MPa for tensile strength and 94.36 MPa for flexural strength, both achieved in Y orientations. However, composites showed an improvement in tensile and flexural moduli in X orientation with 1395.40 MPa, and 2937.72 MPa for Young and flexural modulus, respectively. In the flammability test, wood/PLA bio-composites were ignited easily with reduced smoke production compared to the neat PLA. Wood/PLA bio-composites exhibited high stiffness, and their mechanical properties were influenced by many factors, such as percentage of weight fraction, wood type, and printing orientations. 天然纤维,如木纤维,由于其低环境影响、成本效益和作为快速生长材料和可再生资源的出色机械性能,可以在各种应用中替代合成纤维. 本文旨在采用增材制造方法研究20%木纤维作为聚乳酸(PLA)增强材料的力学性能. 这些样品是使用3D打印技术制造的. 相关参数包括X、Y和Z方向上的打印方向,填充百分比设置为100%. 研究结果表明,生物复合材料及其采用的印刷取向证实了其对力学性能的显著影响. 与木材/PLA相比,纯PLA在各个方面都具有优越的性能. 拉伸强度和弯曲强度的最高值分别为50.33MPa和94.36MPa,均在Y方向上达到. 然而,复合材料在X方向上的拉伸和弯曲模量有所提高,分别为1395.40MPa和2937.72MPa; 分别. 在可燃性测试中,与纯PLA相比,木材/PLA生物复合材料更容易点燃,产生的烟雾更少. 木材/PLA生物复合材料具有较高的刚度,其力学性能受到许多因素的影响,如重量分数百分比、木材类型和印刷方向.

Mechanical properties and water absorption behaviour of PLA and PLA/wood composites prepared by 3D printing and injection moulding

Influence of the Manufacturing Method (3D Printing and Injection Molding) on Water Absorption and Mechanical and Thermal Properties of Polymer Composites Based on Poly(lactic acid)

Effect of thermal modification of wood particles for wood-PLA composites on properties of filaments, 3D-printed parts and injection moulded parts

Investigating mechanical properties of 3D printed polylactic acid / poly-3-hydroxybutyrate composites. Compressive and fatigue performance

The influence of water absorption on the mechanical performance of 3D‐printed sandwich composite structures made from PLA‐based materials under quasi‐static loading conditions

An assessment of PLA/wood with PLA core sandwich multilayer component tensile strength under different 3D printing conditions

Influence of Rice Husk and Wood Biomass Properties on the Manufacture of Filaments for Fused Deposition Modeling

Effect of Material Extrusion Process Parameters to Enhance Water Vapour Adsorption Capacity of PLA/Wood Composite Printed Parts

Effect of thermal modification of wood on the rheology, mechanical properties and dimensional stability of wood composite filaments and 3D-printed parts

Additive manufacturing of mechanical testing samples based on virgin poly (lactic acid) (PLA) and PLA/wood fibre composites

Property enhancement of 3D printed of timber waste/PLA composite by surface coating

Innovative Approaches for Manufacturing Epoxy‐Modified Wood and Cellulose Fiber Composites: A Comparison between Injection Molding and 3D Printing

Mechanical Properties and Flammability Analysis of Wood Fiber Filled Polylactic Acid (PLA) Composites Using Additive Manufacturing

Mechanical Properties and Assessment of PLA Mixed with Carbon by Using Additive Manufacturing

An experimental study on the wear performance of 3D printed polylactic acid and carbon fiber reinforced polylactic acid parts: Effect of infill rate and water absorption time

Mechanical properties of 3D printed polylactic acid elements: Experimental and numerical insights

Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing

Comparative investigation on the mechanical behavior of injection molded and 3D-printed thermoplastic polyurethane

3D-Printed PLA Molds for Natural Composites: Mechanical Properties of Green Wax-Based Composites

Study of the manufacturing process effects of fused filament fabrication and injection molding on tensile properties of composite PLA-wood parts

Printability, Mechanical and Thermal Properties of Poly(3-Hydroxybutyrate)-Poly(Lactic Acid)-Plasticizer Blends for Three-Dimensional (3D) Printing