Plasma behaviour with hydrogen supersonic molecular beam and cluster jet injection in the HL-2A tokamak
Lianghua Yao,Beibing Feng,Chengyuan Chen,Zhongbin Shi,Baoshan Yuan,Yan Zhou,Xuru Duan,Hongjuan Sun,Jie Lu,Yiming Jiao,Guoquan Ni,Haiyang Lu,Weiwen Xiao,Wei Li,Yudong Pan,Wenyu Hong,Hong Ran,Xuantong Ding,Yong Liu
DOI: https://doi.org/10.1088/0029-5515/47/11/001
IF: 3.3
2007-01-01
Nuclear Fusion
Abstract:The experimental results of low pressure supersonic molecular beam injection (SMBI) fuelling on the HL-2A closed divertor indicate that during the period of pulsed SMBI the power density convected at the target plate surfaces was 0.4 times of that before or after the beam injection. An empirical scaling law used for the SMBI penetration depth for the HL-2A plasma was obtained. The cluster jet injection (CJI) is a new fuelling method which is based on and developed from the experiments of SMBI in the HL-1M tokamak. The hydrogen clusters are produced at liquid nitrogen temperature in a supersonic adiabatic expansion of moderate backing pressure gases into vacuum through a Laval nozzle and are measured by Rayleigh scattering. The measurement results have shown that the averaged cluster size of as large as hundreds of atoms was found at the backing pressures of more than 0.1 MPa. Multifold diagnostics gave coincidental evidence that when there was hydrogen CJI in the HL-2A plasma, a great deal of particles from the jet were deposited at a terminal area rather than uniformly ablated along the injecting path. SMB with clusters, which are like micro-pellets, will be of benefit for deeper fuelling, and its injection behaviour was somewhat similar to that of pellet injection. Both the particle penetration depth and the fuelling efficiency of the CJI were distinctly better than that of the normal SMBI under similar discharge operation. During hydrogen CJI or high-pressure SMBI, a combination of collision and radiative stopping forced the runaway electrons to cool down to thermal velocity due to such a massive fuelling.