Abstract:Abstract Warm mix asphalt (WMA) was developed to reduce asphalt production temperatures and energy consumption. Production of toxic gas emissions can be reduced considerably. However, lowered production temperature results in the presence of trapped moisture in the aggregates that could lead to stripping and subsequently moisture susceptibility problems, and which can be mitigated by using additives. Asphalt mixtures incorporating such additive must exhibit at least similar performance to conventional hot mix asphalts (HMA) which produce at higher temperatures. This paper evaluates the engineering properties and moisture susceptibility of asphalt mixtures incorporating Organo-Silane additive for use as WMA and anti-stripping agent. WMA samples were compacted at 125 °C and 115 °C and their performance were compared with control HMA specimens. The asphalt mixtures were prepared using similar aggregate gradation and binder types. Mixture workability was quantified in terms of the Compaction Energy Index (CEI) that was measured by integrating the area under the densification curve between gyration 8 and 92% theoretical maximum density. Lower CEI implies a more workable mixture. The CEI of WMA was 76.4, which was much less than the corresponding value for HMA. Samples were also tested for Marshal stability, resilient modulus and wheel tracking (WTT) tests according to ASTM D6927, ASTM D4123 and BS EN12697-22 procedures, respectively. The control samples perform better in the stability test. The resilient modulus of WMA was only about 10% lower compared to HMA. Resistance to permanent deformation was measured from the dynamic stability (DS) or the number of wheel passes per 1 mm rut depth over the last 15 minutes in a 60-minute tracking test. The DS of HMA, WMA compacted at 125 °C and 115 °C were 3138, 3044 and 2837, respectively. From the rutting resistance standpoint, the results are not significantly different. Hence, incorporation of the additive does not adversely affect mixture rutting resistance despite the lowered production temperature.

Moisture Susceptibility, Deicing, and Self-Healing Characteristics of Sasobit-Modified Warm Mix Asphalt Containing Basic Oxygen Furnace Filler

Mechanical Performance Of Warm-Mixed Porous Asphalt Mixture With Steel Slag And Crumb-Rubber-Sbs Modified Bitumen For Seasonal Frozen Regions

Quantitative Evaluation on the Energy Saving and Emission Reduction Characteristics of Warm Mix Asphalt Mixtures

Zinc Slag as a Partial or Total Replacement for Mineral Filler in Warm Mix Asphalt and Its Effects on Self-Healing Capacity and Performance Characteristics

An evaluation of the mechanical and self-healing properties of warm mix asphalt containing scrap metal additives

Advancing the performance characteristics of rubber asphalt mixtures through the integration of Basic Oxygen Furnace (BOF) slag: A focus on static and dynamic mechanical enhancements

Self-healing cold mix asphalt containing steel slag: A sustainable approach to cleaner production

The study of the feasibility and manufacture of slurry seal surface treatment with steel slag industry wastes: use of basic oxygen furnace (BOF) slag filler as raw material replacement

Performance evaluation of asphalt mixtures containing warm mix asphalt (WMA) additives and reclaimed asphalt pavement (RAP)

Laboratory investigation on warm mix asphalt incorporating organo-silane additive

The Performance Evaluation of Asphalt Mortar and Asphalt Mixture Containing Municipal Solid Waste Incineration Fly Ash

Characteristics, mechanisms, and environmental LCA of WMA containing sasobit: An analysis perspective combing viscosity-temperature regression and interface bonding strength

Improving the Mechanical Properties of Recycled Asphalt Pavement Mixtures Using Steel Slag and Silica Fume as a Filler

Sustainable microwave-heating healing asphalt concrete fabricated with waste microwave-sensitive fillers

Performance Evaluations of Warm-Mix Reaction-Rejuvenated SBS Modified Asphalt Mixtures Incorporated with Wax-Based Additive

Enhanced Induction Heating and Self-Healing Properties of Steel Slag Powder Based Asphalt and Asphalt Mixture under Microwave Irradiation

The Effect of Microwave Radiation on the Self-Healing Performance of Asphalt Mixtures with Steel Slag Aggregates and Steel Fibers

A Laboratory Study of Warm Mix Asphalt for Moisture Damage Potential Using Surface Free Energy Method

Research on Improving Moisture Resistance of Asphalt Mixture with Compounded Recycled Metallurgical Slag Powders

Porosity of municipal solid waste incinerator bottom ash effects on asphalt mixture performance

Self-Healing Analysis of Half-Warm Asphalt Mixes Containing Electric Arc Furnace (EAF) Slag and Reclaimed Asphalt Pavement (RAP) using a Novel Thermomechanical Healing Treatment