Abstract:Friction stir welding (FSW) is a promising technology for the joining of aluminum alloys and other metallic admixtures that are hard to weld by conventional fusion welding. Although FSW generally provides better fatigue properties than traditional fusion welding methods, fatigue properties are still significantly lower than for the base material. Apart from voids, kissing bonds for instance, in the form of closed cracks propagating along the interface of the stirred and heat affected zone, are inherent features of the weld and can be considered as one of the main causes of a reduced fatigue life of FSW in comparison to the base material. The main problem with kissing bond defects in FSW, is that they currently are very difficult to detect using existing NDT methods. Besides, in most cases, the defects are not directly accessible from the exposed surface. Therefore, new techniques capable of detecting small kissing bond flaws need to be introduced. In the present paper, a novel and practical approach is introduced based on a nonlinear, single-sided, ultrasonic technique. The proposed inspection technique uses two single element transducers, with the first transducer transmitting an ultrasonic signal that focuses the ultrasonic waves at the bottom side of the sample where cracks are most likely to occur. The large amount of energy at the focus activates the kissing bond, resulting in the generation of nonlinear features in the wave propagation. These nonlinear features are then captured by the second transducer operating in pitch-catch mode, and are analyzed, using pulse inversion, to reveal the presence of a defect. The performance of the proposed nonlinear, pitch-catch technique, is first illustrated using a numerical study of an aluminum sample containing simple, vertically oriented, incipient cracks. Later, the proposed technique is also applied experimentally on a real-life friction stir welded butt joint containing a kissing bond flaw.

Applying Laser-Ultrasonic and Acoustic-Emission Methods to Nondestructive Testing at Different Stages of Deformation Formation in Friction Stir Welding

Experimental Study of Nondestructive Microstructural Characterization of Friction Stir Welded Joints

Residual stress effects and fatigue behavior of friction-stir-welded 2198-T8 Al-Li alloy joints

Fatigue Behaviour In Friction Stir Welded 2198-T8 Al-Li Alloy Joint For Integral Metal Fuselage Application

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

Study on Stress and Strain Fields of Linear Friction Welded Joints of TC11/TC17 Titanium Alloys During Welding process

Dynamic Fracture Properties of 2024-T3 and 7075-T6 Aluminum Friction Stir Welded Joints with Different Welding Parameters

Application of the hybrid process ultrasound enhanced friction stir welding on dissimilar aluminum/dual‐phase steel and aluminum/magnesium joints

The study on defects in aluminum 2219-T6 thick butt friction stir welds with the application of multiple non-destructive testing methods

Ultrasonic And Metallographic Study Of The Heat-Affected Zone Of A Carbon Steel Welded Joint Under Plastic Deformation And Fatigue

Estimation of Structural Degradation of the Heat Affected Zone of the Welded Joint Under Fatigue

Applying a nonlinear, pitch-catch, ultrasonic technique for the detection of kissing bonds in friction stir welds

Research progress in ultrasonic testing for friction stir welding of aluminum alloy

Experimental and Numerical Studies of Nonlinear Ultrasonic Responses on Plastic Deformation in Weld Joints

Evaluation of Capabilities of Ultrasonic Energy on Failure Load and Corrosion Resistance of Friction Stir Lap Welded Al–steel Joints

Detection of residual stress in friction stir welding of heterogeneous aluminum/copper sheets—ultrasonic method

Experimental Investigation of Laser Peening Effects on Tensile Properties of AA2195-T6 Friction Stir Welded Joints

Research on the mechanical properties and fracture mechanism of ultrasonic vibration enhanced friction stir welded aluminum/steel joint

Investigation of structural-phase transformations of weld metal and in the heat-affected zone during laser welding

Acoustic effect on the joint quality and process of friction stir lap welding of aluminum to steel

Present Study and Prospect of Friction Stir Welding Residual Stress