Abstract:This study investigates the thermal performance and temperature uniformity of a hybrid battery thermal management system (BTMS) that integrates phase change material (PCM), metal foam, and minichannels. Computational fluid dynamics is used to model the PCM melting process and heat transfer between all components. The primary goal of the work is to investigate BTMS architectures which can enhance thermal uniformity and prevent critical temperature rise in a high-voltage battery pack under fast discharging and real-world driving cycle. Four BTMS designs are compared. The design that integrates PCM, metal foam, and counterflow minichannels is shown to have the best performance. At low pumping power (coolant Reynolds number Re = 10), this design reduces the peak battery temperature by 11.5 K compared to a design employing pure PCM only. This configuration also ensures a temperature difference of less than 5 K among individual battery cells, addressing thermal safety considerations and extending battery lifespan. Further analysis revealed that the inclusion of metal foam delays PCM melting, enhances both system and battery thermal uniformity, and offers a higher performance-to-weight ratio compared to designs without metal foam. Although wavy-shaped minichannels offer minimal temperature improvement (0.3 K) over straight minichannels, their higher cost and increased pumping power requirements do not justify their practicality. Under both fast discharging and real driving conditions, the first design with pure PCM provides uniform heat distribution within batteries but fails to maintain the maximum battery temperature within the optimal range. Overall, this study highlights the effectiveness of the proposed hybrid BTMS design in providing uniform temperature distribution and maintaining the maximum battery temperature within the optimal range under harsh environmental conditions, fast discharging, and the Urban Dynamometer Driving Schedule (UDDS) drive cycle.

Investigation of horizontal and vertical distance of lithium-ion batteries on the thermal management of the battery pack filled with phase change material with the air flow

Study on thermal aspects of lithium-ion battery packs with phase change material and air cooling system

Simultaneous cooling of plate and cylindrical batteries in an air-cooled lithium battery thermal management system, by changing the distances of the batteries from each other and the pack wall

Numerical investigation of the effect of prepared phase change material-expanded graphite composite and vertical air ducts on the thermal performance of a Li-ion battery

Investigation of the effect of aspect ratio in an enclosure filled with phase change materials and its effect on thermal management of lithium-ion batteries: Applicable for storing solar energy

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Study of Natural Convection of Lithium-Ion Battery Module Employing Phase Change Material

Three-dimensional Numerical Study of the Effect of an Air-Cooled System on Thermal Management of a Cylindrical Lithium-Ion Battery Pack with Two Different Arrangements of Battery Cells

Influence of battery cell spacing on thermal performance of phase change material filled lithium-ion battery pack

Effects analysis on heat dissipation characteristics of lithium-ion battery thermal management system under the synergism of phase change material and liquid cooling method

Enhancing thermal performance of cylindrical Li-ion battery packs: A 3D simulation with strategic phase change material integration and airflow control

Optimization of heat transfer and temperature control of battery thermal management system based on composite phase change materials

Investigation of multifactorial effects on the thermal performance of battery pack inserted with multi-layer phase change materials

Numerical investigation on thermal management system for lithium ion battery using phase change material

Improving lithium battery cooling: analyzing the impact of air flow, nanofluid flow, and phase change materials

Thermal uniformity analysis of a hybrid battery pack using integrated phase change material, metal foam, and counterflow minichannels

Thermal Performance of Pouch Lithium-ion Battery Module Cooled by Phase Change Materials

Thermal Management Evaluation of Li-ion Battery Employing Multiple Phase Change Materials Integrated Thin Heat Sinks for Hybrid Electric Vehicles

Computational study on hybrid air-PCM cooling inside lithium-ion battery packs with varying number of cells

Economic cost and technical efficiency analysis of thermal management of a triple pack of lithium-ion battery with forced airflow and nano-phase change materials

Thermal Management of High Power Lithium Ion Battery Using Heat Pipe and Phase Change Material (PCM)