Abstract:The notorious growth of Li dendrites significantly shortens the longevity and raises safety concerns of high-energy-density Li metal batteries. We proposed a sulfurized solid electrolyte interphase (SEI) to protect Li metal anode in a working Li metal battery. By incorporating Li2S into the interphase, a polycrystalline and mosaic SEI film with poor crystallinity was achieved. Li2S, Li2O, Li3N, LiNO3, and LiF nanoparticles were embedded in the sulfurized SEI. A high ionic conductivity of 3.1×10−7Scm−1 was achieved for the sulfurized SEI, around one magnitude higher than that of the routine SEI (4.2×10−8Scm−1). Therefore, uniform plating/stripping of the Li metal was achieved without Li dendrite formation. The sulfurized SEI enabled stable cycling of Li | Li cells for 500h at 1.0mAcm−2 and for 150h at 5.0mAcm−2. With the protection of a sulfurized SEI film, Li metal anode exhibited a high Coulombic efficiency of 98% during 200 cycles at 1.0mAcm−2, while the Coulombic efficiency drastically dropped to 70% at the 200th cycle on Li metal anode with routine SEI. The pouch cells exhibited a plating resistance of −331 and −108mV, a stripping resistance of 67 and 54mV on Li metal anode with routine and sulfurized SEI films, respectively. The sharply decreased resistance, endowed by the sulfurized SEI, futher suggested the rapid Li ion diffusion in working Li-metal batteries. This affords new insights into the SEI structure and its critical role in Li metal protection, and sheds a fresh light on the rational design of electrolyte additives and SEI film in a working Li metal battery.

In-situ regulation of dendrite-free lithium anode by improved solid electrolyte interface with defect-rich boron nitride quantum dots

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Boron‐Doped Electrolytes as Interfacial Modifiers for High‐Rate Stable Lithium Metal Batteries

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

SiO2 Hollow Nanosphere-Based Composite Solid Electrolyte for Lithium Metal Batteries to Suppress Lithium Dendrite Growth and Enhance Cycle Life

Dendrite-free lithium deposition enabled by interfacial regulation via dipole-dipole interaction in anode-free lithium metal batteries

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Simultaneously in-situ fabrication of lithium fluoride and sulfide enriched artificial solid electrolyte interface facilitates high stable lithium metal anode

SiO<sub>2</sub> Hollow Nanosphere-Based Composite Solid Electrolyte for Lithium Metal Batteries to Suppress Lithium Dendrite Growth and Enhance Cycle Life

Dendrite-free lithium anode achieved under lean-electrolyte condition through the modification of separators with F-functionalized Ti3C2 nanosheets

Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries

Artificial Solid Electrolyte Interphase Engineering toward Dendrite-Free Lithium Anodes

Stable Anion‐Derived Solid Electrolyte Interphase in Lithium Metal Batteries

N, F-enriched Inorganic/organic Composite Interphases to Stabilize Lithium Metal Anodes for Long-Life Anode-Free Cells.

Stabilized Solid Electrolyte Interphase Induced by Ultrathin Boron Nitride Membranes for Safe Lithium Metal Batteries

Bi-containing Electrolyte Enables Robust and Li Ion Conductive Solid Electrolyte Interphase for Advanced Lithium Metal Anodes

Construction of lithophilic solid electrolyte interfaces with a bottom-up nucleation barrier difference for low-N/P ratio Li-metal batteries

Stable LiMetal Anode Enabled by Simultaneous Regulation of Electrolyte Solvation Chemistry and The Solid Electrolyte Interphase

Sulfurized Solid Electrolyte Interphases with a Rapid Li+ Diffusion on Dendrite-Free Li Metal Anodes

Suppressing lithium dendrite via hybrid interface layers for high performance quasi-solid-state lithium metal batteries

Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode