Abstract:This study established an integrated process for the extraction and enrichment of chlorogenic acid (CGA) from Eucommia ulmoides leaves in a deep eutectic solvent system via ultrasonic wave-enhanced adsorption and desorption practices utilizing macroporous resins. Although deep eutectic solvents (DESs) have the advantages of chemical stability, good dissolving capacity, and nonvolatilization, routine solvent recovery operations are not suitable for subsequent separation in this solvent system. Based on the above characteristics, this study integrated the extraction and enrichment processes, in which DESs extracts directly loaded onto the macroporous adsorption resin, avoiding the loss of target components in solvent recovery and redissolution processes. The screening results of solvents and resin types further showed that choline chloride-malic acid (1:1) was the optimal DES, and the NKA-II resin had high adsorption and elution performance for CGA. The viscosities of the DESs were much higher than those of water and conventional organic solvents; thus, the mass transfer resistance was large, which could also affect the adsorption behaviour of the macroporous resin. The thermal and mechanical effects of ultrasound could effectively enhance the efficiency of the mass transfer, adsorption, and desorption in the DES systems. When compared to no sonication treatment, the CGA adsorption at various ultrasonic powers (120–600 W) was examined. At optimal ethanol concentration (60%), the effect of the ultrasonic treatment on the recovery of the DESs (water eluting process) and the desorption capability of CGA were confirmed. The use of three volumes of water elution could recover the DESs without loss of CGA. The adsorption process significantly differed depending on the ultrasonic settings, and the absorption balance time and experimental adsorption capacity at equilibrium were enhanced. Additionally, the adsorption procedure of the NKA-II macroporous resin for CGA under ultrasonic treatment could be clarified by the pseudo second order kinetic equation and the Freundlich isotherm model. Thermodynamic and dynamic parameters indicated that physical adsorption was the main process of the entire procedure, and it was a spontaneous, exothermic, and entropy-reducing physical adsorption process. This study potentially indicates that the use of ultrasonication, as a high-efficiency, environmentally friendly method, can enhance the features of the macroporous resin to better purify target chemicals from a DES extract.

Adsorption behavior of amino functionalized MCM-41 on chlorogenic acid from Eucommia ulmoides leaves

Study on the adsorption behavior of chlorogenic acid from Eucommia ulmoides Oliver leaf extract by a self-synthesized resin

Adsorption of Alkaloids on Ordered Mesoporous Carbon

UPLC-Triple-TOF/MS characterization of phenolic constituents and the influence of natural deep eutectic solvents on extraction of Carya cathayensis Sarg. peels: Composition, extraction mechanism and in vitro biological activities.

UPLC-Triple-TOF/MS characterization of phenolic constituents and the influence of natural deep eutectic solvents on extraction of<i> Carya</i><i> cathayensis</i> Sarg. peels: Composition, extraction mechanism and<i> in</i><i> vitro</i> biological activities

Adsorption of phenolic compounds from aqueous solution onto a macroporous polymer and its aminated derivative: isotherm analysis

Solid-liquid extraction of chlorogenic acid from Eucommia ulmoides Oliver leaves: Kinetic and mass transfer studies

Adsorptive Separation of Methylalumoxane by Mesoporous Molecular Sieve MCM-41

Acid Dye Adsorption Properties of Ethylenediamine-Modified Magnetic Chitosan Nanoparticles

An integrated process by ultrasonic enhancement in the deep eutectic solvents system for extraction and separation of chlorogenic acid from Eucommia ulmoides leaves

Performance of the MCM-41-NH2 Functionalized Mesoporous Material Synthetized from the Rice Husk Ash on the Removal of the Polycyclic Aromatic Hydrocarbons

Functionalized magnetic MCM-48 nanoporous silica by cyanuric chloride for removal of chlorophenol and bromophenol from aqueous media

Multiple Interactions on Macroporous Adsorption Resins Modified with Ionic Liquid

Role of Amination of a Polymeric Adsorbent on Phenol Adsorption from Aqueous Solution.

Adsorption of aromatic acids on an aminated hypercrosslinked macroporous polymer

Non-hydrothermal synthesis and characterization of MCM-41 mesoporous materials from iron ore tailing

Removal of Cu(II) Ions from Contaminated Water Using Chemically Modified MCM-41

Adsorption of Methyl Green dye onto MCM-41: equilibrium, kinetics and thermodynamic studies

Adsorption Behaviors of (–)-Epigallocatechin Gallate and Caffeine on Macroporous Adsorption Resins Functionalized with Carbazole and N-methylimidazole

Adsorption of Aromatic Compounds from Aqueous Solution by a Hypercrosslinked Polymeric Adsorbent with Sulphonic Groups

Preparation and Adsorption Properties of MCM-41 with Novel Gemini Ionic Liquid Surfactants as Template