Abstract:Advances in Mechanical Engineering, Volume 16, Issue 9, September 2024. A rolling bearing plays a key role in the gearbox of the cold rolling mill transmission system. As a result, the degradation and failure of bearings can lead to unplanned shutdowns of the entire rolling mill system. Since on-site cold rolling mills work usually in non-steady lubrication rolling conditions originating form variations of multiple parameters, the uncertainty affecting bearing performance in a cold rolling mill transmission system increases, making it more difficult to assess health status and predict the remaining service life of bearings, Therefore, by establishing a coupling model describing the relationship for the rolling mill and normal /faulty gearboxes under non steady rolling conditions, quantitatively studies the influence of various rolling parameters of a rolling mill on the fatigue service life of bearings in the gearbox of the rolling mill transmission system, and verify the effectiveness of linear cumulative damage theory for bearing fatigue service life through experiments and on-site bearing vibration data. The results indicate that as the thickness of the strip steel inlet, lubricant viscosity, and rolling speed increase, or the thickness of the strip steel outlet and rolling roll radius decrease, the service life of bearings gradually decreases. As the fluctuation amplitude of various rolling parameters in the cold rolling mill increases, the service life of bearings in the gearbox of the rolling mill transmission system gradually shortens. Moreover, when the rolling parameter value or fluctuation amplitude increases to a specific values, the remaining service life of bearings will sharply decrease. Under the same rolling conditions, the service life of bearings in gearboxes with faults decreases more significantly than that in normal gearboxes.

Measured load spectra of the bearing in high-speed train gearbox under different gear meshing conditions

Measured dynamic load distribution within the in situ axlebox bearing of high-speed trains under polygonal wheel–rail excitation

A new approach for analyzing internal load and fatigue life of deep groove ball bearing in high-speed gearbox system

Analysis of vibration and temperature on the axle box bearing of a high-speed train

Dynamic response analysis of high-speed train gearboxes excited by wheel out-of-round: experiment and simulation

Analysis on Load Distribution of High-Speed Railway Axle Box Bearings

Analysis of Temperature Field Distribution of Magnetic-Fluid Bearing for High-Speed Trains

Gearbox Lubrication Failure Modes and Discrimination of Locomotives for High-speed Railway

Establishment and Analysis of Load Spectrum for Bogie Frame of High-Speed Train at 400 km/h Speed Level

Vibration analysis of bogie components based on electromechanical coupling model and test for high speed train

Study on Vibration Characteristics of High Speed Train Gear Box

Development of Load System for High-Speed Railway Rolling

Research on the change in lubrication state and temperature control strategy of high-speed train axle box bearings using non-destructive testing

Research on the service life of bearings in the gearbox of rolling mill transmission system under non-steady lubrication state

Detection method for contact stress distribution of tapered roller bearings

Torsional vibration analysis of the gear transmission system of high-speed trains with wheel defects

Study on the vibration characteristics of double-row tapered roller bearings for high-speed rail axle box

Bearing Fault Severity Assessment Method Based on Spectrum Energy Variation

Fatigue failure mechanism of high-speed train bearing steel after long-term service

High Frequency Vibration Analysis of Ball Bearings under Radial Loads

Lubrication mechanism in gearbox of high-speed railway trains