Deep Learning for Efficient Microseismic Location using Source Migration‐based Imaging

Qingshan Zhang,Wei Zhang,Xinming Wu,Jie Zhang,Wenhuan Kuang,Xu Si

DOI: https://doi.org/10.1029/2021JB022649

2022-03-06

Abstract:Journal of Geophysical Research: Solid Earth, Accepted Article.

geochemistry & geophysics

What problem does this paper attempt to address?

DMLoc: Automatic Microseismic Locating Workflow Based on Deep Learning and Waveform Migration

Yizhuo Liu,Jing Zheng,Ruijia Wang,Suping Peng,Shuaishuai Shen

DOI: https://doi.org/10.1785/0220230391

2024-01-01

Seismological Research Letters

Abstract:During hydraulic fracturing, real-time acquisition of the spatiotemporal distribution of microseismic in the reservoir is essential in evaluating the risk of induced seismicity and optimizing injection parameters. By integrating deep learning with migration-based location methods, we develop an automatic microseismic locating workflow (named DMLoc). DMLoc applies deep learning to automate phase picking and leverage the phase arrival probability function generated by a convolutional network as the input for waveform migration. The proposed workflow is first applied to the continuous data of the Dawson-Septimus area. Compared with a reference catalog generated by the SeisComP3 software, our method automatically locates 57 additional seismic events (accounting for 43% of the events in the obtained catalog). We further evaluate the performance of DMLoc by applying it to a 35-day continuous microseismic dataset from the Tony Creek Dual Microseismic Experiment. The spatiotemporal distribution of our detected events is consistent with results reported in prior catalogs, demonstrating the effectiveness of our method. In contrast to using raw microseismic records for stacking, DMLoc addresses the issue of inaccurate locating caused by low signal-to-noise ratios and polarity changes. The use of GPUs has substantially accelerated the calculations and enabled DMLoc to output locating results in minutes. This fast and efficient metric could be easily extended to any microseismic monitoring scenario that requires (near) real-time locations and assists in site-based risk mitigation and industrial operation optimization.
An efficient least-squares reverse time migration in image domain

Chen ShengChang,Li DaiGuang,Jin ChengMei

DOI: https://doi.org/10.6038/cjg2022P0532

2022-01-01

Chinese Journal of Geophysics

Abstract:The results of least-squares migration have higher fidelity and spatial resolution than that of conventional migration. In this paper, an efficient method for least-squares reverse time migration in imaging domain (IDLSRTM) is proposed by using spatial de-convolution. Given a smooth velocity model with accurate kinematics of seismic wave used for migration (only the migration based on scalar wave equation is considered), the conventional reverse time migration (RTM) can be viewed as one kind of rough solution to the linear inversion problem of subsurface reflectivity. In image domain, the conventional reverse time migration results are a spatial-variant integral of the least-squares reverse time migration results and Hessian matrix. Different column vectors in the Hessian matrix can be regarded as the point spread functions of different imaging points in imaging domain. Because of the smoothness of migration velocity model and the multifold of seismic data acquisition system, the point spread functions of imaging points in a certain local region have well similarity. Therefore, the conventional reverse time migration results can be approximately represented as a spatial-invariant convolution between the least-square reverse time migration results and the Hessian matrix in the local region, and then a least-square reverse time migration method in image domain based on the local region spatial-invariant de-convolution is proposed. The spatial-invariant de-convolution can be efficiently and stably realized by using the pseudo-generalized inverse approach to spatial-invariant de-convolution in wavenumber domain. The size of local region is a trade-off between the efficiency and the effect of the least-square reverse time migration. The method proposed in this paper is applied to synthetic and field seismic data, ideal results are obtained.
Reflected wave least squares reverse time migration with angle illumination compensation

Huamin Zhou,Shengchang Chen,Liming Zhou,Haoran Ren,Rushan Wu,Guoqiang Xiao

DOI: https://doi.org/10.1007/s11600-019-00368-1

IF: 2.293

2019-01-01

Acta Geophysica

Abstract:High-quality seismic data imaging plays an important role in the lithological interpretation of subsurface structures. However, high-quality imaging remains a challenging task. Based on the linear inversion theory of reflected wave equations, this paper proposes reflected wave least squares reverse time migration with angle illumination compensation to better balance the amplitude of seismic imaging. We use the reflected wave migration equation to unify forward and backward propagation, which helps to obtain an image with correct phase and symmetric waveform. Under the assumption that the spectrum of seismic wavefield remains unchanged, the Poynting vector method is used to efficiently calculate the propagation direction of seismic waveform and seismic illumination in the angle domain. During iteration, angle-domain illumination is used as a preconditioner to compensate for the amplitude of the iterated gradient terms based on the angle value. In this manner, we can enhance the imaging energy of steeply inclined structures. To improve the stability of linear inversion, the spatial derivative of the image is used as a regularized constraint term. Numerical tests show that the proposed method can suppress imaging noise as well as improve resolution and amplitude fidelity of the images. Furthermore, the inversed result can be used to estimate underground reflectivity, which is important for the further development of seismic inversion technology.
A Novel Deep-Learning Image Condition for Locating Earthquake

Wenhuan Kuang,Jie Zhang,Wei Zhang

DOI: https://doi.org/10.1093/gji/ggad350

IF: 3.352

2023-01-01

Geophysical Journal International

Abstract:SUMMARY Migration-based earthquake location methods may encounter the polarity reversal issue due to the non-explosive components of seismic sources, leading to an unfocused migration image. Such a problem usually makes it difficult to accurately retrieve the optimal location from the migrated source image. In this study, by taking advantage of the general pattern recognition ability of the convolutional neural network, we propose a novel deep-learning image condition (DLIC) to address this issue. The proposed DLIC measures the goodness of waveform alignments for both P and S waves, and it follows the geophysical principle of seismic imaging that the best-aligned waveforms represent fully a best-imaged source location. A synthetic test shows that the DLIC can effectively overcome the polarity reversal issues. Real data applications to southern California show that the DLIC can enhance the focusing of the migrated source image over the classic source scanning algorithm. Further tests show that the DLIC applies to continuous seismic data, to regions with few previously recorded earthquakes, and has the potential to locate small earthquakes. The proposed DLIC shall benefit the migration-based source location methods.
Microseismic Source Location Using Deep Learning: A Coal Mine Case Study in China

Yue Song,Enyuan Wang,Hengze Yang,Chengfei Liu,Baolin Li,Dong Chen

DOI: https://doi.org/10.1016/j.jrmge.2024.02.014

IF: 5.915

2024-01-01

Journal of Rock Mechanics and Geotechnical Engineering

Abstract:Microseismic source location is crucial for the early warning of rockburst risks. However, the conventional methods face challenges in terms of the microseismic wave velocity and arrival time accuracy. Intelligent techniques, such as the full convolutional neural network (FCNN), can capture spatial information but struggle with complex microseismic sequence. Combining the FCNN with the long short-term memory (LSTM) network enables better time-series signal classification by integrating multi-scale information and is therefore suitable for waveform location. The LSTM-FCNN model does not require extensive data preprocessing and it simplifies the microseismic source location through feature extraction. In this study, we utilized the LSTM-FCNN as a regression learning model to locate the seismic focus. Initially, the method of short-time-average/long-time-average (STA/LTA) arrival time picking was employed to augment spatiotemporal information. Subsequently, oversampling the on-site data was performed to address the issue of data imbalance, and finally, the performance of LSTM-FCNN was tested. Meanwhile, we compared the LSTM-FCNN model with previous deep-learning models. Our results demonstrated remarkable location capabilities with a mean absolute error (MAE) of only 7.16 m. The model can realize swift training and high accuracy, thereby significantly improving risk warning of rockbursts.
Microseismic Source Location with Distributed Reverse Time Migration

Sili Wang,Fangyu Li,WenZhan Song

2018-01-01

Abstract:Traditionally, microseismic source location requires a timeconsuming data collection as well as intensive computations, both of which take manpower and resources. Instead, with a sensor network based distributed location algorithm, we can locate the events in a real-time manner. In this abstract, we propose a modified distributed reverse time migration (RTM) method for microseismic source location, which is designed for sensor networks. The distributed system assigns the calculation tasks to several “sinks” (locally central nodes), and every sink only processes the local data and those from its neighboring nodes. Compared with the traditional RTM method, the distributed RTM only requires processing partial data on individual devices, leading to lower computation and communication costs. To further reduce the communication cost, we propose to only exchange the locally stacked RTM imaging results instead of the whole wave fields. Then, the location result is obtained by merging the RTM images from all sinks. The proposed algorithm is shown in detail, and examples demonstrate that our proposed method is promising and able to generate accurate and robust location results.
An Efficient Deep Learning Image Condition for Locating Earthquakes

Wenhuan Kuang,Jie Zhang,Wei Zhang

2023-04-14

Abstract:Migration-based earthquake location methods may encounter the polarity reversal issue due to the non-explosive components of seismic source, leading to an unfocused migration image. Various methods have been proposed, yet producing an ideally focused migration source image is still a challenge. In this study, by taking advantage of the general pattern recognition ability of convolutional neural network, we propose a novel Deep Learning Image Condition (DLIC) to address this issue. The proposed DLIC measures the goodness of waveform alignments for both P- and S-waves after correcting their traveltime moveouts and it follows the geophysical principle of seismic imaging that the best-aligned waveforms utterly represent a best-imaged source location. Both a synthetic test and real data application are used to show the effectiveness and merits of the proposed DLIC. A test on synthetic data shows that the DLIC can effectively overcome the polarity reversal issues in the data. Real data application to southern California shows that the DLIC can greatly enhance the focusing of migrated source image over the widely used source scanning algorithm. Further tests show that the DLIC is applicable to continuous seismic data, to regions with few historical earthquakes, and has the potential to locate small earthquakes. The proposed DLIC shall benefit the migration-based source location methods.

Geophysics
Relocation Method of Microseismic Source in Deep Mines

Lin-qi Huang,Xi-bing Li,Long-jun Dong,Chu-xuan Zhang,Dong Liu

DOI: https://doi.org/10.1016/s1003-6326(16)64429-1

IF: 3.752

2016-01-01

Transactions of Nonferrous Metals Society of China

Abstract:A new method, named relocation, was proposed to reduce the impact of sensor errors systematically, especially when available data of sensors are abundant. The procedure includes evaluating the reliability of every sensors datum, processing the initial location by the credible data, and selecting a set of equations with optimal noise tolerance according to the relative relationship between the initial location and sensors location, then calculating the final location by k-mean voting. The results obtained in this research include comparing traditional location method with the presented method in both simulation and field experiment. In the field experiment, the location error of relocation method reduced 41.8% compared with traditional location method. The results suggested that relocation method can improve the fault-tolerant performance significantly.
Uncovering the microseismic signals from noisy data for high-fidelity 3D source-location imaging using deep learning

Omar M. Saad,Min Bai,Yangkang Chen

DOI: https://doi.org/10.1190/geo2021-0021.1

IF: 3.264

2021-10-20

Geophysics

Abstract:Localizing the microseismic event plays a key role in microseismic monitoring. However, microseismic data usually suffer from a low signal-to-noise ratio (S/N), which could affect the resolution of the microseismic source location. We have developed an unsupervised deep learning approach based on variational autoencoder (VAE) and squeeze-and-excitation (SE) networks for enhancing microseismic signals, as well as suppressing noise. First, the microseismic data are divided into several overlapped patches. Second, the VAE encodes the data, extracting the significant features related to the useful signals. Finally, the extracted latent features are decoded to uncover the useful signals and discard the others. The SE network is used to guide the VAE to preserve the useful information related to the clean signal by scaling the extracted features from the encoder part and concatenating them with the features of the decoder part. Our algorithm is evaluated using several synthetic and field examples. As a result, a robust denoising performance is shown despite the existence of a high level of random and coherent noise, for example, with an S/N as low as −32.45 dB. Then, the denoised signal can be used as input data to image the source location using a reverse time migration method, leading to better location accuracy. Our algorithm performs the best when compared to benchmark methods such as f- x deconvolution and the damped multichannel singular spectrum analysis methods.

geochemistry & geophysics
RFloc3D: A Machine-Learning Method for 3-D Microseismic Source Location Using P- and S-Wave Arrivals

Yangkang Chen,Alexandros Savvaidis,Sergey Fomel,Omar M. Saad,Yunfeng Chen

DOI: https://doi.org/10.1109/tgrs.2023.3236572

IF: 8.2

2023-01-01

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Passive seismic source location imaging is important to various scientific and engineering research topics spanning from unconventional reservoir development in exploration seismology to seismic hazard prevention in the earthquake seismology community. The emerging machine-learning (ML) techniques enable the location of passive seismic sources with unprecedented efficiency and accuracy. Most of the state-of-the-art ML methods are based on waveforms, as required by the most popular convolutional neural network (CNN) architecture, which is prone to the sensitivity of velocity models. Here, we present a traveltime-based ML method, RFloc3D, to locate passive seismic sources from manually or automatically picked P- and S-wave arrivals. The proposed method is similar to traditional traveltime-based location methods, where the inverse mapping from arrival times to the passive source location is obtained by inverting a nonlinear inverse problem, but differs in leveraging the random forest (RF) method to learn the inverse mapping relation from numerous eikonal-based forward simulations. Details and analyses of the proposed RFloc3D method are illustrated based on a microseismic monitoring setup. Numerical and real data examples show that the proposed method is capable of real-time location. The inclusion of S-wave arrivals, most importantly, the differential time between P- and S-wave arrivals, helps significantly to reduce the depth error (e.g., decreasing the mean absolute error (MAE) to a half) of the located sources.
High-resolution and robust microseismic grouped imaging and grouping strategy analysis

Guangtan Huang,Xiaohong Chen,Omar M. Saad,Yunfeng Chen,Alexandros Savvaidis,Sergey Fomel,Yangkang Chen

DOI: https://doi.org/10.1111/1365-2478.13216

2022-01-01

Geophysical Prospecting

Abstract:As an advanced real-time monitoring technique, microseismic source-location imaging provides valuable information during hydraulic fracturing, for example, the development of fracture networks and the effective reservoir reconstruction volume. However, microseismic data always suffer from weak induced energy and susceptibility to noise interference. In the case of a low signal-to-noise ratio, it is extremely challenging to perform robust microseismic imaging. Here, we first introduce several state-of-the-art imaging conditions and two hybrid imaging conditions, which are followed by a detailed analysis of the impact of different grouping strategies. Then, we briefly analyse the sensitivity of different imaging conditions to noise using a one-dimensional signal. Next, several benchmark models, including two-dimensional Marmousi-II and three-dimensional SEG Advanced Modeling, are used as numerical examples for testing the passive-source imaging algorithms. Finally, three-dimensional real microseismic data are used to further investigate the impact of the grouping strategy on the imaging. The numerical examples and field data demonstrate the effectiveness of the proposed grouping strategy for the grouped imaging conditions.
Micro-seismic Event Detection and Location in Underground Mines by Using Convolutional Neural Networks (CNN) and Deep Learning

Linqi Huang,Jun Li,Hong Hao,Xibing Li

DOI: https://doi.org/10.1016/j.tust.2018.07.006

IF: 6.9

2018-01-01

Tunnelling and Underground Space Technology

Abstract:Recent years have witnessed a clear trend to develop deeper and longer tunnels to meet the growing needs of mining. Micro-seismic events location is vital for predicting and avoiding the traditional mine disasters induced by high stress concentration, such as rock burst, roof caving, water inrush and slope landslide. Deep learning has become a research hotspot within the field of artificial intelligence in recent years, which has achieved significant progresses and applications in the areas of image recognition, speech recognition, language processing and computer vision. The biggest difference between the deep learning and the traditional back propagation training method is that the deep learning can automatically and independently learn the characteristics of a large amount of data without human intervention. This paper uses Convolutional Neural Network (CNN) and deep learning techniques to develop a method for identifying the Time Delay of Arrival (TDOA) and subsequently the source location of micro-seismic events in underground mines. The power spectrum and phase spectrum of cross wavelet transform calculated from the recorded seismic waves due to micro-seismic events are used as inputs to CNN. The amplitude and phase information of the cross wavelet transform power spectrum are parameters that are used without manual manipulation to build the complex mapping to predict TDOA by deep learning network. Experimental data from the in-field blast tests and simulation tests show that the proposed approach can well identify TDOA and hence detect the event source locations of the field blasting tests. It is demonstrated that the proposed approach with the CNN and deep learning techniques gives more accurate micro seismic source identifications with the recorded noisy waveforms from in-situ blast tests, as compared to several typical existing methods.
Automatic Waveform-Based Source-Location Imaging Using Deep Learning Extracted Microseismic Signals

Omar M. Saad,Yangkang Chen

DOI: https://doi.org/10.1190/geo2020-0288.1

IF: 3.264

2020-01-01

Geophysics

Abstract:We have used an automatic unsupervised technique to extract waveform signals from continuous microseismic data. First, the time-frequency representation (scalogram) is obtained for the input microseismic trace. Second, the convolutional autoencoder (CAE) is used to extract the significant scalogram features related to the waveform signals and discard the rest. Third, the extracted features from the CAE encoder are considered as the input for the k-means clustering algorithm, in which the input samples are classified into waveform and nonwaveform components. The proposed algorithm is evaluated using several synthetic and field examples. We find that the proposed algorithm successfully extracts the waveform signals even in a noisy environment with a signal-to-noise-ratio as low as −10 dB. We compared the proposed algorithm to benchmark algorithms, for example, simple k-means and short-term and long-term average ratio methods, and find that the proposed algorithm performs best. We find that the detected waveform signals can enhance the resolution of microseismic imaging using a waveform-based reverse time migration method.
Waveform Inversion-Assisted Distributed Reverse Time Migration for Microseismic Location

Fangyu Li,Yan Qin,WenZhan Song

DOI: https://doi.org/10.1109/jstars.2019.2904206

IF: 4.715

2019-01-01

IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing

Abstract:We present a novel approach to locate microseismic sources in situ and in real time in distributed sensor networks (DSN). We propose a distributed reverse time migration (RTM) microseismic source location algorithm. RTM-based methods have advantages in passive source location in terms of robustness and accuracy. However, the traditional methods have a centralized data collection and ex situ postprocessing style, and were not designed for in situ and real-time seismic imaging, so communication and computation costs were not considered. Utilizing newly emerging DSN, real-time and in situ microseismic source location becomes possible. Thus, we specially design a joint imaging condition for the DSN system to reduce both computation and communication burdens. The tradeoff, however, is location resolution reduction. Sequentially, we employ a waveform inversion approach to obtain a finer resolution microseismic source location result. Finally, we validate the proposed method using both synthetic and field seismic records. Our approach shows promising performances using synthetics with single and multiple sources, as well as with field data. The proposed waveform inversion-assisted distributed RTM location algorithm obtains high-resolution source location results and significantly reduced communication and computation costs, even at a low signal-to-noise ratio.
Crosscorrelation Migration of Microseismic Source Locations with Hybrid Imaging Condition

Shaojiang Wu,Yibo Wang,Fei Xie,Xu Chang

DOI: https://doi.org/10.1190/geo2020-0896.1

IF: 3.264

2021-01-01

Geophysics

Abstract:Locating microseismic sources is critical to monitoring the hydraulic fractures that occur during fluid extraction/injection in unconventional oil/gas exploration, geothermal operations, and CO2 sequestration. Waveform-based seismic location methods can reliably and automatically image weak microseismic source locations without phase picking. Among them, the crosscorrelation migration (CCM) method can avoid excitation time scanning by generating virtual gathers. We have adopted a CCM location method based on the hybrid imaging condition (HIC). There are four main steps in the implementation of this method: (1) selection of receivers with good azimuthal coverage, (2) generation of virtual gathers by correlating the reference receiver with the rest of the receivers, (3) summation of back projections in the virtual gathers, and (4) multiplication of all summations. The CCM-HIC method is tested on synthetic and field data sets, and the results are compared with those obtained by the conventional summation imaging condition and multiplication imaging condition. The comparison results determine that CCM-HIC is sufficiently robust to obtain a source image with better stability and higher spatial resolution, despite the presence of strong noise.
Focal Mechanism Determination by Location-Constrained Deep Learning: Application to Microseismic Monitoring

Xiao Tian,Yichong Chen,Xiong Zhang,Wei Zhang,Xiangteng Wang

DOI: https://doi.org/10.1190/geo2024-0478.1

IF: 3.264

2024-01-01

Geophysics

Abstract:Accurate and rapid determination of focal mechanism solutions is of great significance for real-time seismic monitoring. Previous deep learning approaches for focal mechanism determination typically use the waveform data, which is sensitive to the velocity model and inherently includes information about both the source location and the focal mechanism. We introduce a location-constrained deep learning algorithm for determining the focal mechanism for surface microseismic events. By using aligned P-wave data along with azimuth and take-off angle as input, we narrow the solution space for the focal mechanism problem and reduce the dependence on the velocity model. The model is trained using 40,000 theoretical samples generated with the geometry and velocity model of the field data. Validation tests, comparisons with a waveform-based network, velocity perturbation tests, and location error tests are performed to demonstrate the robustness and efficiency of our method. After applying the trained model to field data, the results demonstrate that our method is fast and achieves comparable accuracy to HASH results for high-quality events, making it promising for real-time microseismic monitoring.
Noise source localization using deep learning

Jie Zhou,Binbin Mi,Jianghai Xia,Hao Zhang,Ya Liu,Xinhua Chen,Bo Guan,Yu Hong,Yulong Ma

DOI: https://doi.org/10.1093/gji/ggae171

IF: 3.352

2024-05-06

Geophysical Journal International

Abstract:SUMMARY Ambient noise source localization is of great significance for estimating seismic noise source distribution, understanding source mechanisms and imaging subsurface structures. The commonly used methods for source localization, such as the matched field processing and the full-waveform inversion, are time-consuming and not applicable for time-lapse monitoring of the noise source distribution. We propose an efficient alternative of using deep learning for noise source localization. In the neural network, the input data are noise cross-correlation functions and the output are matrices containing the information of noise source distribution. It is assumed that the subsurface structure is a horizontally layered earth model and the model parameters are known. A wavefield superposition method is used to efficiently simulate ambient noise data with quantities of local noise sources labelled as training data sets. We use a weighted binary cross-entropy loss function to address the prediction inaccuracy caused by a sparse label matrix during training. The proposed deep learning framework is validated by synthetic tests and two field data examples. The successful applications to locate an anthropogenic noise source and a carbon dioxide degassing area demonstrate the accuracy and efficiency of the proposed deep learning method for noise source localization, which has great potential for monitoring the changes of the noise source distribution in a survey area.

geochemistry & geophysics
3D microseismic monitoring using machine learning

Yangkang Chen,Omar M. Saad,Alexandros Savvaidis,Yunfeng Chen,Sergey Fomel

DOI: https://doi.org/10.1029/2021JB023842

2022-02-27

Abstract:Journal of Geophysical Research: Solid Earth, Accepted Article.

geochemistry & geophysics
High-Precision Microseismic Source Localization Using a Fusion Network Combining Convolutional Neural Network and Transformer

Qiang Feng,Liguo Han,Liyun Ma,Qiang Li

DOI: https://doi.org/10.1007/s10712-024-09846-8

2024-06-16

Surveys in Geophysics

Abstract:Microseismic source localization methods with deep learning can directly predict the source location from recorded microseismic data, showing remarkably high accuracy and efficiency. Two main categories of deep learning-based localization methods are coordinate prediction methods and heatmap prediction methods. Coordinate prediction methods provide only a source coordinate and generally do not provide a measure of confidence in the source location. Heatmap prediction methods require the assumption that the microseismic source is located on a grid point. Thus, they tend to provide lower resolution information and localization results may lose precision. This study reviews and compares previous methods for locating the source based on deep learning. To address the limitations of existing methods, we devise a network fusing a convolutional neural network and a Transformer to locate microseismic sources. We first introduce the multi-modal heatmap combining the Gaussian heatmap and the offset coefficient map to represent the source location. The offset coefficients are utilized to correct the source locations predicted by the Gaussian heatmap so that the source is no longer confined to the grid point. We then propose a fusion network to accurately estimate the source location. A gated multi-scale feature fusion module is developed to efficiently fuse features from different branches. Experiments on synthetic and field data demonstrate that the proposed method yields highly accurate localization results. A comprehensive comparison of coordinate prediction method and heatmap prediction methods with our proposed method demonstrates that the proposed method outperforms the other methods.

geochemistry & geophysics
Accelerating Bayesian microseismic event location with deep learning

A. Spurio Mancini,D. Piras,A. M. G. Ferreira,M. P. Hobson,B. Joachimi

DOI: https://doi.org/10.5194/se-12-1683-2021

2021-08-02

Abstract:We present a series of new open source deep learning algorithms to accelerate Bayesian full waveform point source inversion of microseismic events. Inferring the joint posterior probability distribution of moment tensor components and source location is key for rigorous uncertainty quantification. However, the inference process requires forward modelling of microseismic traces for each set of parameters explored by the sampling algorithm, which makes the inference very computationally intensive. In this paper we focus on accelerating this process by training deep learning models to learn the mapping between source location and seismic traces, for a given 3D heterogeneous velocity model, and a fixed isotropic moment tensor for the sources. These trained emulators replace the expensive solution of the elastic wave equation in the inference process. We compare our results with a previous study that used emulators based on Gaussian Processes to invert microseismic events. We show that all of our models provide more accurate predictions and $\sim 100$ times faster predictions than the method based on Gaussian Processes, and a $\mathcal{O}(10^5)$ speed-up factor over a pseudo-spectral method for waveform generation. For example, a 2-s long synthetic trace can be generated in $\sim 10$ ms on a common laptop processor, instead of $\sim$ 1 hr using a pseudo-spectral method on a high-profile Graphics Processing Units card. We also show that our inference results are in excellent agreement with those obtained from traditional location methods based on travel time estimates. The speed, accuracy and scalability of our open source deep learning models pave the way for extensions of these emulators to generic source mechanisms and application to joint Bayesian inversion of moment tensor components and source location using full waveforms.

Geophysics,Computational Physics,Data Analysis, Statistics and Probability

Deep Learning for Efficient Microseismic Location using Source Migration‐based Imaging

DMLoc: Automatic Microseismic Locating Workflow Based on Deep Learning and Waveform Migration

An efficient least-squares reverse time migration in image domain

Reflected wave least squares reverse time migration with angle illumination compensation

A Novel Deep-Learning Image Condition for Locating Earthquake

Microseismic Source Location Using Deep Learning: A Coal Mine Case Study in China

Microseismic Source Location with Distributed Reverse Time Migration

An Efficient Deep Learning Image Condition for Locating Earthquakes

Relocation Method of Microseismic Source in Deep Mines

Uncovering the microseismic signals from noisy data for high-fidelity 3D source-location imaging using deep learning

RFloc3D: A Machine-Learning Method for 3-D Microseismic Source Location Using P- and S-Wave Arrivals

High-resolution and robust microseismic grouped imaging and grouping strategy analysis

Micro-seismic Event Detection and Location in Underground Mines by Using Convolutional Neural Networks (CNN) and Deep Learning

Automatic Waveform-Based Source-Location Imaging Using Deep Learning Extracted Microseismic Signals

Waveform Inversion-Assisted Distributed Reverse Time Migration for Microseismic Location

Crosscorrelation Migration of Microseismic Source Locations with Hybrid Imaging Condition

Focal Mechanism Determination by Location-Constrained Deep Learning: Application to Microseismic Monitoring

Noise source localization using deep learning

3D microseismic monitoring using machine learning

High-Precision Microseismic Source Localization Using a Fusion Network Combining Convolutional Neural Network and Transformer

Accelerating Bayesian microseismic event location with deep learning