Abstract:Fiber hybridization is a new and effective way of altering the inherent low mechanical properties and durability issues of recycled concrete by using a multi-fiber approach. Research conducted thus far is majorly focused on studying the effects of hybrid fibers on the basic mechanical properties of recycled concrete and no attention is given to the multicriteria-based performance assessment, which is highly important from the perspective of practical applications. The current study is an effort in this regard that intends to evaluate, compare, and rate the multicriteria-based performance of a total of eleven mix formulations prepared with a single and hybrid usage of basalt fiber (BF), polypropylene fiber (PPF) and glass fiber (GF). In addition, two mineral admixtures namely pulverized flyash (PFA) and ground granulated blast furnace slag (GGBFS) were used. From the results of mechanical properties, it is determined that mix formulations comprising hybrid 0.75 %BF-0.25 %PPF and 0.5 %BF-0.5 %GF had the highest strength improvement of 16–21% in compressive strength, 36–49% in splitting tensile strength, and 54–71% in flexural strength. The freeze–thaw assessment revealed that the use of hybrid fibers together with PFA and GGBFS resulted in superior durability performance of recycled concrete specifically in terms of lower length variation (0.055%), lower mass loss (0.39%) and higher UPV (4137 m/s) after 300 cycles. From the cost analysis, it is observed that MRC-1BF had the highest net cost increase of 121.7% of all mixes. Lastly, the multicriteria analysis revealed that the hybrid BF-GF and BF-PPF based MRC had the best performance score and ranking of all formulations, thus implying that their practical use would be highly beneficial in terms of mechanical performance as well as cost-effectiveness.

Multicriteria based optimization of second generation recycled aggregate concrete

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Mechanical and Durability Properties of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregate and Fly Ash, Slag and Silica Fume

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

RSM-based optimized mix design of recycled aggregate concrete containing supplementary cementitious materials based on waste generation and global warming potential

Effects of Mix Design and Functional Unit on Life Cycle Assessment of Recycled Aggregate Concrete: Evidence from Co2 Concrete

Mix design optimization of waste-based aggregate concrete for natural resource utilization and global warming potential

Multicriteria performance assessment of sustainable recycled concrete produced via hybrid usage of basalt, polypropylene and glass fiber

Pervious Concrete with Secondarily Recycled Low-Quality Brick-Concrete Demolition Residue: Engineering Performances, Multi-Scale/phase Structure and Sustainability

Multi-Objective Optimization Methods for Designing Low-Carbon Concrete Mixtures

An agile, intelligent and scalable framework for mix design optimization of green concrete incorporating recycled aggregates from precast rejects

Hybrid Environmentally Friendly Method for RCA Concrete Quality Improvement

Experimental investigation of mechanical properties and multi-objective optimization of electronic, glass, and ceramic waste–mixed concrete

Multi objective optimization of recycled aggregate concrete based on explainable machine learning

Multicriteria Analysis of Cement Mortar with Recycled Sand

A comprehensive assessment of mechanical and environmental properties of green concretes produced using recycled concrete aggregates and supplementary cementitious material

Sustainable criterion selection framework for green building materials – An optimisation based study of fly-ash Geopolymer concrete

Chemistry-informed multi-objective mix design optimization of self-compacting concrete incorporating recycled aggregates

Effective method for upcycling construction and demolition waste into concrete: A life cycle approach

Environmental Risk Assessment of Sustainable Concrete Through the Chemical Composition of Metals and Polycyclic Aromatic Hydrocarbons

Mixture Optimization of Recycled Aggregate Concrete Using Hybrid Machine Learning Model