Abstract:An experimental and computational investigation directed at understanding the role of buoyancy-driven convection during constrained melting of phase change materials (PCM) inside a spherical capsule is reported. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. A Darcy’s Law-type porous media treatment links the effect of phase change on convection. Paraffin wax n-octadecane was constrained during melting inside a transparent glass sphere through the use of thermocouples installed inside the sphere. The melting phase front and melting fraction of the PCM are analyzed and compared with numerical solution obtained from the CFD code Fluent. Following a short period of symmetric melting due to prominence of diffusion, expedited phase change in the top region of the sphere and a wavy surface at the bottom of the PCM are observed. The computational predictions point to the strong thermal stratification in the upper half of the sphere that results from rising of the molten liquid along the inner surface of the sphere thus displacing the colder fluid. The waviness and excessive melting of the bottom of the PCM is shown to be underestimated by the experimental observation. This discrepancy is linked to the use of a support structure to hold the sphere. Measured temperature data and computational results near the bottom indicate the establishment of an unstable fluid layer that promotes chaotic fluctuations and is responsible for waviness of the bottom of the PCM. On the other hand, the comparison between the measured and computed temperatures in the top half of the sphere show the stable nature of the molten liquid layer. The computational results start to deviate from the thermocouple readings as one moves lower from the top of the sphere. This delay in predicting the melting instant is linked to the thermal stratification within the “constant temperature bath” that encloses the capsule.

Experimental investigation on heat transfer characteristics of microcapsule phase change material suspension in array jet impingement

Numerical simulation on jet impingement heat transfer with microcapsule phase change material suspension: Single jet and array jet

An Experimental Investigation of Constrained Melting Heat Transfer of Nano-Enhanced Phase Change Materials in a Horizontal Cylindrical Capsule Using Thermochromic Liquid Crystal Thermography

Heat Transfer During Constrained Melting of Nano-Enhanced Phase Change Materials in A Spherical Capsule: an Experimental Study

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Unconstrained Melting Heat Transfer of Nano-Enhanced Phase-Change Materials in a Spherical Capsule for Latent Heat Storage: Effects of the Capsule Size

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

Experimental Investigation of Heat Storage and Heat Transfer Rates During Melting of Nano-Enhanced Phase Change Materials (nepcm) in a Differentially-Heated Rectangular Cavity

Experimental Investigation On Laminar Forced Convection Heat Transfer Enhancement Of Microencapsulated Phase Change Suspension With Constant Heat Flux

Investigation on the Heat Transfer and Charge/discharge Performance of Phase Change Material Capsule Emulsion Based on Nanoparticles Enhanced Thermal Conductivity

Convective heat transfer characteristics of microencapsulated phase change material suspensions in minichannels

Experimental Study of Laminar Flow Heat Transfer with Microencapsulated Phase Change Material Suspensions in Rectangular Mini-Channels

An Experimental Study of Convective Heat Transfer with Microencapsulated Phase Change Material Suspension: Laminar Flow in A Circular Tube under Constant Heat Flux

Experimental investigation of spray cooling heat transfer with microcapsule phase change suspension

EXPERIMENTAL RESEARCH ON LAMINAR FORCED CONVECTION HEAT TRANSFER CHARACTERISTICS OF MICROENCAPSULATED PHASE CHANGE MATERIAL SUSPENSION

Confined jet array impingement cooling with spent flow distraction using NEPCM slurry

Dynamic Thermal Characteristics Analysis of Microencapsulated Phase Change Suspensions Flowing Through Rectangular Mini-Channels for Thermal Energy Storage

Preparation and Characterization of Phase Change Microcapsule Emulsion for Thermal Energy Storage and Transportation

Preparation And Thermal Properties Of Microencapsulated Phase Change Material For Enhancing Fluid Flow Heat Transfer

Impact of Microcapsules Wettability on Thermal Conductivity of Microencapsulated Phase Change Material(mpcm) Suspensions