Abstract:Through polymer engineering, the membrane properties can be considerably changed and its performance can be improved. Organic solvent nanofiltration (OSN) membranes require polymers with good solution processability to facilitate membrane preparation. However, the resultant membranes should have excellent solvent resistance. Poly(ether-ether-ketone) (PEEK) is a potential polymer for OSN applications because of its high thermal stability and excellent solvent resistance. However, commercial PEEK has limited solution processability, and its fabrication requires a harsh acidic environment. Herein, two customized PEEKs were synthesized by incorporating methyl (–CH 3 ) and sulfonyl (SO 2 ) groups into the polymer backbone. The membranes were prepared by phase inversion using N -methyl-2-pyrrolidone (NMP) and TamiSolve as a green alternative. The effects of the polymer structure, green solvent, and crosslinking on the membrane morphology, chemical and mechanical stability, as well as separation performance have been examined. The molecular interaction between organic solvents and PEEKs were investigated through molecular dynamic simulations and density functional theory. The molecular weight cutoff (MWCO) values of the membranes were 540–768 g mol −1 , with a high corresponding permeance of 8.2–20 L m −2 h −1 bar −1 in acetone. The long-term stability of membranes was successfully demonstrated over two weeks through a continuous crossflow filtration using acetone under a pressure of 30 bar. The membranes demonstrated excellent active pharmaceutical ingredient purification through the removal a 2-methoxyethoxymethyl chloride (125 g mol −1 ) carcinogenic impurity from roxithromycin (837 g mol −1 ).

Physico-chemical analysis of semi-crystalline PEEK in aliphatic and aromatic solvents

Study on the Melt Memory Effect and Melt Recrystallization Behavior of Crystallizable Biphenylene Poly(arylene ether sulfone ketone)

Investigation of color and physicomechanical properties of peek and pekk after storage in a different medium

A Case Study of Polyether Ether Ketone (I): Investigating the Thermal and Fire Behavior of a High-Performance Material

Effect of degree of polymerization, crystallinity and sulfonation on the thermal behaviour of PEEK: a molecular dynamics-based study

Facile Depolymerization of Thermally Stable Polyetherethersulfone and Polyetheretherketone Using Hydroquinone and Bases

Evaluation of Extraction Conditions for Volatile Extractables from Polypropylene, PBT Resins, and Chlorobutyl Rubber Elastomers Using a Variety of Solvents and Extraction Techniques

Aging of polyetheretherketone (PEEK) and polyphthalamide (PPA) in polar and non-polar lubricant base oils

Assessing the degradation profiles of a thermoresponsive polyvinyl alcohol (PVA)‐based hydrogel for biomedical applications

Preparation and performance of soluble N-heterocyclic poly(aryl ether ketone)s with enhanced thermal resistance

Crystallization and melting behavior of poly(ether ketone ketone) (PEKK) copolymers synthesized by facile one-step method

Solvent Absorption by Carbon Fibre Reinforced PEEK Laminates

Novel Soluble N-heterocyclic Poly(aryl Ether Ketone)s Containing Pendant Biphenyl Groups Performing Excellent Thermal and Mechanical Performance

A STUDY ON THERMAL AND DYNAMIC MECHANICAL PROPERTIES OF PPESK/PES BLENDS

Physical aging of a biodegradable alicyclic polymer: poly (pentamethylene trans -1,4-cyclohexanedicarboxylate)

Morphology and properties of foamed high crystallinity PEEK prepared by high temperature thermally induced phase separation

Solution-processable poly(ether-ether-ketone) membranes for organic solvent nanofiltration: from dye separation to pharmaceutical purification

Effects of physical and chemical ageing on 3D printed poly (ether ether ketone)/poly (ether imide) [PEEK/PEI] blend for aerospace applications

Thermal Decomposition Investigation on Heat-Resistant Poly (dimethylsilylene Ethynylenemethylphenylene-Methylenemethylphenyleneethynylene) Resins

Effects of Solvent Treatment on Surface Morphology and Composition of Poly(Methyl Methacrylate)-G-Poly(Ethylene Oxide)

Mechanical, Thermal, and Electrical Characterization of Polyethylene Glycol and PDI‐Based Polyurethane Films for Durable Antistatic Applications