Direct and Reactive Dyes Recovery in Textile Wastewater Using Calcinated Hydrotalcite

Eva Bou-Belda,Daniel López-Rodríguez,Bàrbara Micó-Vicent,Marilés Bonet-Aracil

DOI: https://doi.org/10.4028/p-31v71q

2022-06-11

Materials Science Forum

Abstract:Publication date: 10 June 2022 Source: Materials Science Forum Vol. 1063 Author(s): Eva Bou-Belda, Daniel López-Rodríguez, Bàrbara Micó-Vicent, Marilés Bonet-Aracil Growing environmental conservation concerns have led researchers to seek the means to treat and recover wastewater. The textile industry dumps vast quantities of wastewater from textile dyes. By means of clays, dye waste can be separated and reused for other industrial processes. Clay absorption varies depending on the type of dye employed because factors like the reactivity of the dye molecule and its size are very important during the absorption process. The absorption capacity of calcined hydrotalcite at several concentrations was compared in a 0.05 g • L-1 solution of four distinct dyes: Direct Blue 199, Direct Red 23, Direct Blue 71 and Reactive Yellow. Dyes have different molecular weights because the weight of reactive dyes is considerably lighter than that of direct dyes, which is why the Lambert-Beer lines of each dye are previously considered. We worked with a 5 g • L-1 clay concentration to introduce the dye into the clay by stirring for 24 h in 100 ml of each dye solution before filtering it and leaving it to dry. In all cases, the dye absorption by nanoclay was nearly absolute and the initial solution was very clean, which are excellent results from the wastewater treatment point of view. Color measurement was performed by a Jasco V-670, double-beam spectrophotometre between 190-2700 nm. Differences in color were calculated and represented in CIE-Lab* color space diagrams. Finally, thermogravimetric (TGA) and X-ray diffraction (XRD) analyses were carried out to ensure both nanoclay-dye interactions and hydrotalcite structure recovery. No large differences were observed under these conditions, which reinforces the idea of using low nanoclay concentrations.