Design of an embracing-type climbing robot for variation diameter rod

Guoda Chen,Huafeng Yang,Huiqiang Cao,Shiming Ji,Xi Zeng,Qian Wang

DOI: https://doi.org/10.1108/IR-09-2018-0200

2019-10-07

Industrial Robot

Abstract:For the climbing rod object with large diameter variation and the need of obstacle crossing, this paper aims to propose a new embracing-type climbing robot named as EVOC-I robot.

What problem does this paper attempt to address?

A flexible under-driven bionic climbing robot design

Ai Guo,Chao Zeng,Guo Li,Ranran Fang,Yang Liu,Rui Li

DOI: https://doi.org/10.1088/1742-6596/2216/1/012006

2022-03-01

Journal of Physics: Conference Series

Abstract:Abstract The study of a reliable bionic climbing robot to replace humans in dangerous work at height has been a hot and difficult research topic in the academic and engineering communities. Researchers have developed climbing robots such as magnetic adsorption, vacuum adsorption, claw-stick adhesion, bionic adhesion and wet adhesion, depending on the mode of adhesion. However, due to their single adhesion method and limited means of regulation, most of them can only climb under specific experimental conditions and cannot meet complex engineering environments such as variable diameter, roughness and curvature. In order to solve the above technical problems to a certain extent, this paper draws on the excellent grasping ability of primates and the excellent movement form of the inchworm to design a flexible under-driven bionic climbing robot, which includes under-driven fingers made of coupled rigid and soft materials, and a lightweight torsional and telescopic system with good climbing adaptability and variable diameter wall transition capability. The flexible under-driven fingers are made of coupled bones, joints, muscles and skin of different modulus. The telescopic system consists of an open round thin shell rod, a two-axis motor and a flexible torso. Based on the mechanical design, the flexible under-driven finger is fabricated and subjected to finite element simulations and experiments, which show that the flexible gripper has good gripping adaptability for different shapes of objects.
Climbing robot based on triangle wheels obstacle crossing design: modeling simulation and motion analysis

Zheng J. Lu,Shao L. Wu,Yu. Feng,Kai. Chen,Wei Wang

DOI: https://doi.org/10.1007/s40430-023-04468-4

IF: 2.361

2023-09-25

Journal of the Brazilian Society of Mechanical Sciences and Engineering

Abstract:Intelligent overhead distribution line work must be realized to solve the problem of line operation and maintenance. Routine manual detection has serious hidden safety issues in the distribution network of overhead transmission line maintenance and maintenance work. As such, the design of a climbing rod robot has widely adopted a fully round structure, to ensure reliability and efficiency stability. However, at the moment, pole-climbing robots face several issues, such as low efficiency, unstable obstacle crossing ability, complex control system, and low degree of intelligence, all of which have a significant impact on the design and actual use of various types of pole-climbing robots. In order to improve the obstacle climbing ability of the climbing robot and solve the problem of unmanned climbing operation, from the perspective of climbing efficiency and obstacles, this research proposes a semi-closed double-wheel climbing robot with an obstacle climbing function based on the basic structure of a wheel climbing robot. Moreover, the study discusses the overall design, motion simulation, and force analysis and describes the analysis of the climbing robot. The results of this research reveal that combining the stability and mobility of the wheeled robot with the obstacle passing ability of the triangle wheel, the obstacle passing height is increased to 0.65 times the wheel diameter by switching the obstacle passing mode; the double-layer triangular wheel obstacle crossing mechanism is adopted to provide enough climbing rod thrust and clamping stability, which increases the height of the obstacle crossing by 1.5 times.

engineering, mechanical
Design of Climbing Mechanism for a Tree Climbing Robot

Vineet Pandey

Abstract:Evolution in nature has given organisms a highly efficient body. These organisms if imitated can be very useful in design of efficient tools, structures or machines. We have devised a mechanism inspired by shrimp known as Stomatapod-whose entire body acts like a distributed foot facilitating it move in the most rugged terrains with agility. Hence this locomotive mechanism has been imitated to make an efficient climber. The grippers are designed in such a way that they hold the trunk of the tree-within a defined range, using the concept of passive compliance. This mechanism can be used to climb poles or straight trees. This mechanism is different from the existing ones.

Engineering,Environmental Science
Structure design and optimization of ground moving and pole climbing inspection robot

Changlong Ye,Yunfei Zang,Suyang Yu,Chunying Jiang

DOI: https://doi.org/10.1108/aa-12-2021-0168

IF: 2.373

2022-03-10

Assembly Automation

Abstract:Purpose The purpose of this paper is to demonstrate a multipurpose inspection robot that can both walk on the ground and climb on poles. The structure design, size optimization, kinematics analysis, experiment and arithmetic of the robot are discussed in the paper. Design/methodology/approach The robot consists of three adjustable modules and a two-degree-of-freedom parallel mechanism in tandem, and the wheel-finger mechanism of each module can realize wheel-finger opening and closing for fast movement and obstacle crossing. This paper uses geometric analysis and simulation analysis to derive size optimization, and vector coordinate method to derive kinematics. Finally, the experiment is carried out by simulating the working environment of the robot. Findings The robot can realize ground walking and ground turning through the robot entity prototype experiment on the built working environment and efficiently realize 0°–90° pole climbing by the assemble design, optimization and machining. In addition, the robot can also smoothly complete the state transition process from 0° ground to 90° pole climbing. Furthermore, the robot shows good environmental self-adaptation and can complete daily inspection work. Originality/value The robot can pitch and yaw at a large angle and has six-legged characteristics. It is a multipurpose inspection robot that can walk on the ground and climb on poles. And through structure design, size optimization, kinematics analysis and simulation, the existing robots’ common shortcomings such as poor barrier-crossing ability and poor environmental adaptability are solved.

automation & control systems,engineering, manufacturing
Climbot: A Bio-Inspired Modular Biped Climbing Robot—System Development, Climbing Gaits, and Experiments

Yisheng Guan,Li Jiang,Haifei Zhu,Wenqiang Wu,Xuefeng Zhou,Hong Zhang,Xiangmin Zhang

DOI: https://doi.org/10.1115/1.4028683

2016-01-27

Journal of Mechanisms and Robotics

Abstract:Agriculture, forestry, and building industry would be prospective fields of robotic applications. High-rise tasks in these fields require robots with climbing skills. Motivated by these potential applications and inspired by animal climbing motion, we have developed a biped climbing robot—Climbot. Built with a modular approach, the robot consists of five joint modules connected in series and two special grippers mounted at the ends, with the scalability of changing degrees-of-freedom (DoFs). With this configuration, Climbot not only has superior mobility on multiple climbing media, such as poles and trusses, but also has the function of grasping and manipulating objects. It is a kind of “mobile” manipulator and represents an advancement in development of climbing robots. In this paper, we first present the development of this climbing robot with modular and bio-inspired methods, and then propose and compare three climbing gaits based on the unique configuration and features of the robot. A series of challenging and comprehensive experiments with the robot climbing in a truss and performing an outdoor manipulation task are carried out, to illustrate the feasibility, the features, the climbing, and manipulating functions of the robot, and to verify the effectiveness of the proposed gaits.
Soft Rod-Climbing Robot Inspired by Winding Locomotion of Snake

Bing Liao,Hongbin Zang,Mingyang Chen,Yunjie Wang,Xin Lang,Nana Zhu,Zheng Yang,Yan Yi

DOI: https://doi.org/10.1089/soro.2019.0070

IF: 7.784

2020-08-01

Soft Robotics

Abstract:Soft climbing robots have attracted much attention of researchers for their potential applications on the wall or inside the tube. However, making a soft robot climb on the outer surface of a rod or tube by agile and efficient motion has long been a challenge. Inspired by the winding climbing locomotion of arboreal snakes, a tethered pneumatic-actuated winding-styled soft rod-climbing robot that consists of two winding actuators and a telescopic actuator is proposed in this work. Based on constant curvature assumption, we develop a theoretical model to analyze the linear and bending motion of the actuators. We demonstrate that our robot can perform climbing locomotion similar to snakes, including turning around a corner along a rod, climbing a vertical rod with a maximum speed of 30.85 mm/s (0.193 body length/s), and carrying a larger payload (weight, 500 g, more than 25 times its self-weight) than existing soft climbing robots do on a vertical surface. In addition, the experimental tests exhibit the potential applications of the robot in special environments such as high-voltage cables, nuclear power plants, and underwater sites.

robotics
Design and analysis of a six-wheeled companion robot with mechanical obstacle-overcoming adaptivity

Zhen Song,Zirong Luo,Guowu Wei,Jianzhong Shang

DOI: https://doi.org/10.5194/ms-12-1115-2021

IF: 1.3858

2021-12-23

Mechanical Sciences

Abstract:Abstract. A six-wheeled companion exploration robot with an adaptive climbing mechanism is proposed and released for the complicated terrain environment of planetary exploration. Benefiting from its three-rocker-arm structure, the robot can adapt to complex terrain with its six wheels in contact with the ground during locomotion, which improves the stability of the robot. When the robot moves on the flat ground, it moves forward through the rotation of the wheels. When it encounters obstacles in the process of moving forward, the front obstacle-crossing wheels hold the obstacle, and the rocker arms on both sides rotate themselves with mechanical adaptivity to drive the robot to climb and cross the obstacle like crab legs. Furthermore, a parameterized geometric model is established to analyze the motion stability and the obstacle-crossing performance of the robot. To investigate the feasibility and correctness of design theory and robot scheme, a group of design parameters of the robot are determined. A prototype of the robot is developed, and the experiment results show that the robot can maintain stability in rugged terrain environments and has a certain ability to surmount obstacles.

engineering, mechanical
Design of Transverse Brachiation Robot and Motion Control System for Locomotion between Ledges at Different Elevations

Chi-Ying Lin,Yong-Jie Tian

DOI: https://doi.org/10.3390/s22114031

2022-05-26

Abstract:Bio-inspired transverse brachiation robots mimic the movement of human climbers as they traverse along ledges on a vertical wall. The constraints on the locomotion of these robots differ considerably from those of conventional brachiation robots due primarily to the need for robust hand-eye coordination. This paper describes the development of a motion control strategy for a brachiation robot navigating between wall ledges positioned on a level plane or at different elevations. We based our robot on a four-link arm-body-tail system performing a four-phase movement, including a release phase, body reversal phase, swing-up phase, and grasping phase. We designed a gripper that uses passive wrist joint motion to grasp the ledge during the tail swing. We also developed a dynamic model by which to coordinate the swing-up movement, define the phase switching conditions, and time the grasping action of the grippers. In experiments, the robot proved highly effective in traversing between wall ledges of the same or different elevations.
Advances in Climbing Robots for Vertical Structures in the Past Decade: A Review

Guisheng Fang,Jinfeng Cheng

DOI: https://doi.org/10.3390/biomimetics8010047

2023-01-22

Biomimetics

Abstract:Climbing robots are designed to conduct tasks that may be dangerous for humans working at height. In addition to improving safety, they can also increase task efficiency and reduce labor costs. They are widely used for bridge inspection, high-rise building cleaning, fruit picking, high-altitude rescue, and military reconnaissance. In addition to climbing, these robots need to carry tools to complete their tasks. Hence, their design and development are more challenging than those of most other robots. This paper analyzes and compares the past decade’s design and development of climbing robots that can ascend vertical structures such as rods, cables, walls, and trees. Firstly, the main research fields and basic design requirements of climbing robots are introduced, and then the advantages and disadvantages of six key technologies are summarized, namely, conceptual design, adhesion methods, locomotion modes, safety mechanisms, control methods, and operational tools. Finally, the remaining challenges in research on climbing robots are briefly discussed and future research directions are highlighted. This paper provides a scientific reference for researchers engaged in the study of climbing robots.
Multimodal pipe-climbing robot with origami clutches and soft modular legs

Yongkang Jiang,Diansheng Chen,Hongying Zhang,Frdric Giraud,Jamie Paik,Frédéric Giraud

DOI: https://doi.org/10.1088/1748-3190/ab5928

2020-01-13

Abstract:In nature, climbing trees and pipes of varying diameters or even navigating inside of hollow pipes and tree holes is easy for some climbing animals and insects. However, today's pipe-climbing robots, which are important for automatically conducting periodic inspections and maintenance of pipelines to save time and keep humans away from hazardous environments, are designed mainly for a specific task, limiting their adaptability to different working scenarios and further implementation in real-life. In this paper, we propose a pipe-climbing robot with a soft linear actuator for bioinspired propulsion, two origami clutches to realize multi-degrees-of-freedom (DoF) motion and two pairs of soft modular legs for multimodal climbing. Design, modeling and experimental validation of the origami clutch are introduced in detail. Preliminary experimental results show that we can achieve a stroke of up to 289.6% and a maximum 45° bending angle on the soft linear actuator by regulating the air pressure inside the soft actuator and origami clutches. Additionally, by choosing the leg-type, three climbing modes, including out-pipe versatile mode, out-pipe high-force mode and in-pipe mode can be realized for particular working scenarios. A prototype climbing robot demonstrates that in out-pipe versatile mode, the robot can climb on the exterior of pipes made of various materials including PVC, rubber and metal with diameters ranging from 105 to 117 mm. In the out-pipe high-force mode, the climber can navigate along a specific pipe carrying maximum 675 g external load at the top or 200 g hanging from the bottom, as well as keeping functional without failure under static loads as high as 1968 g. In the in-pipe mode, the robot is able to travel inside pipes. This research might bridge the design gap between in-pipe and out-pipe climbing robots while offering an alternative option for soft robots to execute multi-DoF motion.

robotics,engineering, multidisciplinary,materials science, biomaterials
Design of a Curved Surface Adaptive Permanent Magnet Wall Climbing Robot

LuShan Zhu,XiongSheng Zheng

DOI: https://doi.org/10.1088/1742-6596/2405/1/012028

2022-12-01

Journal of Physics: Conference Series

Abstract:Abstract At present, there are more and more wall climbing robots applied to metal surfaces at home and abroad, and traditional wall climbing robots can no longer meet the needs of reality. In this paper, a wall climbing robot structure based on a flexible track with variable curvature is designed. By increasing the contact area between the caterpillar and the contact surface, the structure principle, static analysis, and simulation of the influence of wall thickness and air gap on the adsorption capacity of the permanent magnet are introduced. The prototype is manufactured to verify its feasibility. The result proves that. The wall climbing robot designed in this paper can move with the load on the variable curvature elevation and has a certain adaptive ability of variable curvature and obstacle surmounting ability.
Advancing Legged Wall Climbing Robot Performance through Dynamic Contact-Integrated Climbing Model

Shengchang Fang,Guisong Chen,Yitong Zhou,Xiaojie Wang

DOI: https://doi.org/10.1115/1.4064742

2024-02-09

Journal of Mechanisms and Robotics

Abstract:Abstract Climbing robots have gained significance in hazardous and steep terrains, yet adapting to complex environments remains a challenge. Inspired by nature's climbers, this paper introduces a climbing dynamics model that integrates foot-end contact forces, crucial for safe and efficient wall climbing. Drawing insights from animal locomotion and biomechanics, we present a comprehensive dynamic model for quadruped robots. Our model, built upon multibody dynamics and a dynamic contact model based on spiny claw mechanisms, accurately simulates robot forces and motion during climbing, even predicting failure scenarios. Experimental validation further establishes model accuracy. This study advances climbing robot research by addressing attachment interaction dynamics and provides valuable insights for optimizing robot structural design and gait strategies.

robotics,engineering, mechanical
Design of Climbing Robot for Power Transmission Tower Maintenance

Jianying Tian,Qin Liu,Kexin Yuan

DOI: https://doi.org/10.1088/1742-6596/1757/1/012153

2021-01-01

Journal of Physics: Conference Series

Abstract:Abstract Periodic maintenance of transmission lines is a necessary guarantee for stable power transmission and avoiding serious power accidents. In order to reduce the safety risk of the first person climbing the transmission tower and the last person going down the tower when climbing the transmission tower manually, this paper develops an auxiliary climbing robot for the maintenance of transmission tower based on the bionic climbing principle. It includes the modular mechanical structure of the main body lifting, obstacle crossing telescopic, terminal clamping, and body jacking, as well as airborne motion control system and hierarchical control system of upper computer monitoring terminal. The comprehensive test results of indoor and outdoor simulated transmission tower environment show that the robot system can effectively complete the high-altitude climbing of power tower, and ensure the follow-up tasks of hanging, dismantling, and maintenance of safety anti-falling device.
A method for optimal design of an inchworm climbing robot

David Pagano,Dikai Liu,Kenneth Waldron

DOI: https://doi.org/10.1109/robio.2012.6491148

2012-12-01

Abstract:Many ferromagnetic structures require regular inspection and maintenance to ensure their longevity, structural integrity and aesthetics. These operations are often very hazardous to workers, as they are normally performed at height or in confined spaces, and can expose workers to hazardous materials such as lead based paints and vehicle fumes. An inchworm climbing robot has been proposed as a solution that would improve the quality of the inspection procedure and the occupational health and safety for the maintenance personnel while reducing setup times and costs. However, a number of challenges in designing such an inchworm robot arise from the environmental, mobility and safety factors. This paper describes these challenges for given design applications and presents a method to optimise the design to address the challenges. Analyses of the results attest to the feasibility of the solution.
SCALER: Versatile Multi-Limbed Robot for Free-Climbing in Extreme Terrains

Yusuke Tanaka,Yuki Shirai,Alexander Schperberg,Xuan Lin,Dennis Hong

DOI: https://doi.org/10.48550/arXiv.2312.04856

IF: 3.7

2023-12-08

Robotics

Abstract:This paper presents SCALER, a versatile free-climbing multi-limbed robot that is designed to achieve tightly coupled simultaneous locomotion and dexterous grasping. Although existing quadruped-limbed robots have shown impressive dexterous skills such as object manipulation, it is essential to balance power-intensive locomotion and dexterous grasping capabilities. We design a torso linkage and a parallel-serial limb to meet such conflicting skills that pose unique challenges in the hardware designs. SCALER employs underactuated two-fingered GOAT grippers that can mechanically adapt and offer 7 modes of grasping, enabling SCALER to traverse extreme terrains with multi-modal grasping strategies. We study the whole-body approach, where SCALER uses its body and limbs to generate additional forces for stable grasping with environments, further enhancing versatility. Furthermore, we improve the GOAT gripper actuation speed to realize more dynamic climbing in a closed-loop control fashion. With these proposed technologies, SCALER can traverse vertical, overhang, upside-down, slippery terrains, and bouldering walls with non-convex-shaped climbing holds under the Earth's gravity.
Design and Control of a Climbing Robot for Inspection of High Mast Lighting

Peng Li,Xingguang Duan,Guangli Sun,Xiang Li,Yang Zhou,Yunhui Liu

DOI: https://doi.org/10.1108/aa-01-2018-006

IF: 2.373

2019-01-01

Assembly Automation

Abstract:Purpose This paper aims to develop a climbing robot to help people inspect lamps of high-mast lighting. Design/methodology/approach The robot consists of driving mechanism, suspension mechanism and compression mechanism. The driving mechanism is realized by link chains and sprockets, which are arranged opposite to each other, to form a dual caterpillar mechanism. The compression mechanism squeezes the caterpillar, and rubber feet “grasps” the steel rope to generate enough adhesion forces. The suspension mechanism is used to compensate the contraction or extension of the chains. The robot is equipped with a DC motor with a rated power of 250 W and a wireless module to communicate with the operator’s console. The dynamic model of the robot and the control strategy is derived, and the stability of the controller is proofed. Findings The payload experiment shows the robot can afford up to 3.7 times payload versus its own weight. Even when the payload is 30 kg, the robot can maintain a speed of the 1 m/s. The experiments also show that the tracking error of the robot reaches zero. Practical implications The proposed moving mechanism has a high load/weight ratio, which is a verified solution for the cable inspection purpose. Originality/value A rope climbing robot for high mast lighting inspection is proposed. The developed mechanism can reach a speed of 1 m/s with the payload of 30 kg, while its own weight is only 15.6 kg. The payload/weight ratio of the robot is 2.24; this value is rather good in many climbing robots reported in other renowned journal.
Research on Bionic Climbing Robot Based on Gait Analysis

Jiayi Li

DOI: https://doi.org/10.62051/8z2y6j26

2023-12-11

Abstract:In order to replace humans performing hazardous tasks in complex high-altitude environments, we have designed a two-armed modular bionic robot with clawing, climbing and mobility capabilities for high-altitude tasks in agriculture, forestry and construction. In this paper, a five-degree-of-freedom climbing modular robot with the ability to maneuver between poles in space is presented and analyzed. Three types of climbing gaits is designed and compared in the ADAMS simulation environment based on the torques required by the main joints and the energy consumed by the robot to climb the poles in different directions. The simulation results are the basis for planning the gait of the robot during climbing.
HubRobo: A Lightweight Multi-Limbed Climbing Robot for Exploration in Challenging Terrain

Kentaro Uno,Naomasa Takada,Taku Okawara,Keigo Haji,Arthur Candalot,Warley F. R. Ribeiro,Kenji Nagaoka,Kazuya Yoshida

DOI: https://doi.org/10.1109/humanoids47582.2021.9555799

2021-07-19

Abstract:This study presents the design and sequential control strategies of a novel lightweight climbing robot. The quadruped robot with a left–right and front–hind symmetric insect-type configuration has three degrees of freedom (3-DOF) actuated joints in each limb, a 3-DOF passive compliant spine gripper at each foot, and an actuator to open/close the gripper. First, we present the mechanical design and minimal hardware integration of the robot, which have helped successfully reduce the entire mass of the robot to 3 kg with a base height of 0.16 m. Next, a sequential strategy to process stable climbing locomotion is introduced. The implemented software architecture that realizes climbing motion is described. With the successful result of a teleoperation experiment on an indoor test field simulating the Martian uneven slalom (local max. inclination: 45°), we proved that the proposed sequential control strategy enables the robot to stably climb challenging terrain.

Design of an embracing-type climbing robot for variation diameter rod

A flexible under-driven bionic climbing robot design

Climbing robot based on triangle wheels obstacle crossing design: modeling simulation and motion analysis

Design of Climbing Mechanism for a Tree Climbing Robot

Structure design and optimization of ground moving and pole climbing inspection robot

Climbot: A Bio-Inspired Modular Biped Climbing Robot—System Development, Climbing Gaits, and Experiments

Soft Rod-Climbing Robot Inspired by Winding Locomotion of Snake

Design and analysis of a six-wheeled companion robot with mechanical obstacle-overcoming adaptivity

Design of Transverse Brachiation Robot and Motion Control System for Locomotion between Ledges at Different Elevations

Advances in Climbing Robots for Vertical Structures in the Past Decade: A Review

Multimodal pipe-climbing robot with origami clutches and soft modular legs

Design of a Curved Surface Adaptive Permanent Magnet Wall Climbing Robot

Advancing Legged Wall Climbing Robot Performance through Dynamic Contact-Integrated Climbing Model

Design of Climbing Robot for Power Transmission Tower Maintenance

A method for optimal design of an inchworm climbing robot

SCALER: Versatile Multi-Limbed Robot for Free-Climbing in Extreme Terrains

Design and Control of a Climbing Robot for Inspection of High Mast Lighting

Research on Bionic Climbing Robot Based on Gait Analysis

HubRobo: A Lightweight Multi-Limbed Climbing Robot for Exploration in Challenging Terrain