Abstract:This paper investigates the physical properties of Cu 0.6 Mg 0.2 Co 0.2 FeCrO 4 spinel ferrite produced by the sol-gel method and calcined at 850 °C. Our specimen possesses a cubic structure with space group. We detect the presence of small amount of Fe 2 O 3 . Our sample exhibited lattice parameters where a , b , and c were all equal to 8.3506 Å, and the cell volume was 582.307 Å 3 . Then, the spectrum demonstrated good refinement analysis, with a χ 2 factor of 1.66. Subsequently, the Debye–Scherrer equation provided a grain size of 88.18 nm. However, the grain size determined by the Williamson-Hall method resulted was 96 nm. Morphological analysis indicated that our sample consists of micro-sized grains equal to 2.62 μm. The dielectric analysis was carried out from 300 to 600 K, while measurements were taken over a wide frequency range from 10 2 to 10 6 Hz. Examination of the relaxation time and AC conductivity revealed that the same charge carriers could be responsible for both the relaxation and conduction mechanisms. The increase in conductivity at high-frequency can be attributed to the influence of charge carrier mobility through different localized states. This force also promotes the release of confined charges from different trapping sites. The overlapping-large polaron tunneling (OLPT) and Correlated Barrier Hopping (CBH) models were utilized to clarify the observed conduction mechanism. Furthermore, at lower frequencies, the sample exhibited higher real impedance values. Then, as the frequency rose, the Z ′ values decreased because more charge entities were transported, leading to a reduction in the concentration of trapped electric charge. The changes observed in Z ′′ suggest the emergence of the relaxation process. The Nyquist diagram was adjusted from 0 to 5 × 10 7 to understand the equivalent circuit in our system. Then, the conduction mechanism in the sample is influenced by the contributions of both grain and grain boundaries. At low frequencies, the ε ′ and ε ′′ values showed a significant rise and gradually decreased with increasing frequency, indicating that the sample is suitable for high-frequency applications. The decrease in ε ′ and ε ′′ values was more pronounced at lower frequencies than at higher frequencies. This behavior can be adequately explained using Maxwell and Wagner's expression, which is in line with Koops' theory, providing a coherent justification for the observed trends. The value of M ′ rose with frequency independently of temperature, approaching a plateau at a maximum asymptotic value. This saturation phenomenon indicates that charge carriers move over short distances during the conduction process. The Kohlrausch, Williams, and Watts functions were used to fit imaginary electrical modulus spectra. This revealed the non-Debye nature of the relaxation mechanism in the material.

Study of Thermal, Microstructural, Optical, Dielectric, and Magnetic Characterizations of Ni–Fe Spinel Cobaltite for Various Applications

Comprehensive structural analysis, magnetic, elastic, and optical properties of Cu–Ni–Co spinel and its potential applications

Investigation of Magnetic and Dielectric Properties of Nanofibric Spinel Oxides ACo2O4 (A = Co, Ni, and Fe) Under Low Magnetic Field

A comprehensive study on crystal structure, magnetic, and electrical properties of Ni-doped Fe–Cd spinel nano-ferrites

Manganese doped cobalt–nickel spinel ferrite via. sol–gel approach: Insight into structural, morphological, magnetic, and dielectric properties

Investigation of Magnetic and Dielectric Properties of Cobalt Cubic Spinel Ferrite Nanoparticles Synthesized by CTAB-Assisted Co-precipitation Method

Detailed analysis of structural and optical properties of spinel cobalt doped magnesium zinc ferrites under different substitutions

Characterization of Co-doped Ni-Mn Spinel Nanoferrites: A Multi-faceted Evaluation of Structural, Optical, Elastic, and Magnetic Properties

Strong correlation of electrical transport and magnetic properties to ionic states, structure, and morphology of Al-substituted Ni–Co ferrite systems: A comprehensive study

Experimental study of electrical and dielectric properties of Cu0.6Mg0.2Co0.2FeCrO4 spinel ferrite

Synthesis, structural, electrical and magnetic characteristics of Co–Cd spinel nano ferrites synthesized via sol-gel auto combustion method

Synthesis and investigation of structural, elastic, and electrical properties of cobalt and magnesium substituted Ni-Zn spinel ferrite nanoparticles

Study of Structural, Magnetic, and Physical Properties in Nano Cobalt Ferrite by Computational Analysis

Unveiling the impact of Ni doping on the structural, electronic, and magnetic properties of nanocrystalline FeCo 2 O 4 spinel oxide: A combined experimental and ab initio investigations

High electrical conductivity at room temperature of MnCo2O4 cobaltite spinel prepared by sol–gel method

Cr3+-doped nanocrystalline nickel–magnesium–cobalt spinel ferrite: microstructural and magnetic

Electrochemical Characteristics of Nanosized Cu, Ni, and Zn Cobaltite Spinel Materials

Study of Thermal, Structural, and Above-Room-Temperature Dielectric Properties of Mg-Cd-Cu Spinel Ferrites Under Different Annealing Temperatures

Structural, Magnetic, and Dielectric Properties for Mg0.6Co0.2Cu0.2FeCrO4 Spinel Ferrites Prepared Under Different Calcination Temperatures

Structural, optical and dielectric properties of nickel zinc spinel ferrites synthesized by co-precipitation method

Exploring the impact of nickel doping on the structure and low-temperature magnetic features of cobalt nano-spinel ferrite