Abstract:Abstract A drinking-groundwater source protection technology system based on a three-dimensional finite-difference groundwater model was constructed and applied to the safe management of drinking groundwater in the first terrace of Fujiang River. In the study area, the main type of groundwater is the quaternary systemic alluvial deposit loose rock pore water and the aquifer thickness varies between 20 and 35 m. Groundwater is the main source of water and is used for various purposes through two exploitation wells. The water volumes of 1# exploitation well (1#) and 2# exploitation well (2#) are 10,000 m 3 /day and 5000 m 3 /day, respectively. An analysis of 22 indicators from 11 groundwater samples showed that a higher concentration of chemical-oxygen-demand (COD Mn ) and ammonia–nitrogen (NH 3 –N), and they had a high correlation with most of the other water-quality factors. Therefore, COD Mn and NH 3 –N were selected as indicator factors for model calibration and prediction. Twenty-two hydraulic head observation wells were used for flow-model calibration. The flow model indicated that a drop funnel formed with a maximum depth of 12 m, and the particle-capture zone in the original downstream direction of the south side extended to 1100 m because of groundwater exploitation. The solute-transport model showed that industrial pollution sources were the main factors that led to a deterioration of water quality. To analyze the necessity and effectiveness of remediation measures for the safety of drinking-water sources, two scenarios were considered to predict the concentration of NH 3 -N and COD Mn in groundwater exploitation wells over 20 years. Scenario I, which considered that current conditions were maintained, predicted that the NH 3 -N would exceed the drinking-water quality standard of 0.5 mg/L after 16 years. Scenario II, in which industrial sewage treatment plants were installed outside the particle-trapped zone of the exploitation wells and strict anti-seepage measures were implemented, predicted that the peak concentrations of NH 3 -N and COD Mn in the exploitation wells would be 0.26 mg/L and 1.33 mg/L, respectively, after 3 years of model operation. This study provides a theoretical basis for drinking-groundwater source protection that can be applied to safety management practices.

Numerical Study on the Effects of Regional Groundwater Flow on the Contaminant Migration through an Inactive Supply Well as a Preferential Flow Pathway

Numerical Simulation for Groundwater-Source Heat Pump Engineering Disposing Wells Scheme in the Coastal Region

Revisiting simplified model of a single-well push–pull test for estimating regional flow velocity

Effect of Groundwater Quality on Sustainability of Groundwater Resource: A Case Study in the North China Plain

Technical note: A model of chemical transport in a wellbore–aquifer system

Multiphysics Modeling Investigation of Wellbore Storage Effect and Non‐Darcy Flow

Numerical Simulation of Contaminant Removal in a Vertical Subsurface-Flow Constructed Wetland

Numerical study on the responses of groundwater and strata to pumping and recharge in a deep confined aquifer

Impact of Regional Groundwater Flow on Geological Temperature Field with Energy Abstraction from the Aquifer

Sustainability of Regional Groundwater Quality in Response to Managed Aquifer Recharge

Research on drinking-groundwater source safety management based on numerical simulation

The Impact of Injection/Pumping Wells on the Pollution Transport in Groundwater

Optimization strategies for in situ groundwater remediation by a vertical circulation well based on particle tracking and node‐dependent finite difference methods

Analysis of seawater intrusion triggered under different pumping well layout schemes based on a numerical model

An analytical and meshless model for 3D transient flow in a confined aquifer with nonuniform thickness: Application to stream depletion due to groundwater extraction

Semi-analytical Solutions for Groundwater Flow Dynamics in Confined Aquifers under Constant-Rate Injection Considering Clogging of Aquifers Around Well

Modeling Contaminant Transport In A System Of Leaky Aquifers

Assessing the Impact on Groundwater Safety of Inter-Basin Water Transfer Using a Coupled Modeling Approach

Development Of 3d Finite Element Method For Non-Aqueous Phase Liquid Transport In Groundwater As Well As Verification

Numerical Modeling of Contaminant Transport in Fracture-Karst Aquifer and Measures for Pollution Remediation

Numerical simulation of different pollutant control measures around an old landfill contaminated site: A field scale study