Abstract:In wheel rail adhesion studies, most of the test rigs used are simplified designs such as a single wheel or wheelset, but the results may not be accurate. Alternatively, representing the complex system by using a full vehicle model provides accurate results but may incur complexity in design. To trade off accuracy over complexity, a bogie model can be the optimum selection. Furthermore, only a real time model can replicate its physical counterpart in the time domain. Developing such a model requires broad expertise and appropriate software and hardware. A few published works are available which deal with real time modeling. However, the influence of the control system has not been included in those works. To address these issues, a real-time scaled bogie test rig including the control system is essential. Therefore, a 1:4 scaled bogie roller rig is developed to study the adhesion between wheel and roller contact. To compare the performances obtained from the scaled bogie test rig and to expand the test applications, a numerical simulation model of that scaled bogie test rig is developed using Gensys multibody software. This model is the complete model of the test rig which delivers more precise results. To exactly represent the physical counterpart system in the time domain, a real-time scaled bogie test rig (RT SBTR) is developed after four consecutive stages. Then, to simulate the RT-SBTR to solve the internal state equations and functions representing the physical counterpart system in equal or less than actual time, the real-time simulation environment is prepared in two stages. To such end, the computational time improved from 4 times slower than real time to 2 times faster than real time. Finally, the real time scaled bogie model is also incorporated with the braking control system which slightly reduces the computational performances without affecting real time capability.

Simulation of Active Wheelset Steering for an Electric Locomotive

Design and analysis of an active steering bogie for urban trains

Dynamic Modeling, Dynamic Characteristics, and Slight Self-Guidance Ability at High Speeds of Independently Rotating Wheelset for Railway Vehicles

Modeling, System Identification, and Control of a Railway Running Gear with Independently Rotating Wheels on a Scaled Test Rig

Study on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller

Analytical study and evaluation of self-steering ability of elastically constrained wheelsets under traction/braking conditions

Differential Steering-Based Electric Vehicle Lateral Dynamics Control with Rollover Consideration

Real time multibody modeling and simulation of a scaled bogie test rig

Simulation of Full-axle Steering Control Strategy for DRT

Rail vehicle running safety and steering efficiency evaluation method based on equivalent curvature difference of active steering technology

Decoupling of vehicle lateral dynamics using four-wheel steering system

Optimal Model Following Control of Four-Wheel Active Steering Vehicle

Integrated Model Predictive Control of High-Speed Railway Running Gears with Driven Independently Rotating Wheels

A Steering Wheel System and Controller for the Driving Simulator

Simulation for the Handling and Stability of Four-Wheel Steering Vehicle Based on Matlab/Simulink

High-speed wheel/rail contact determining method with rotating flexible wheelset and validation under wheel polygon excitation

A Semi-Active Control Suspension System for Railway Vehicles with Magnetorheological Fluid Dampers

The Analysis of Dynamic Performance on Four-Wheel Steering Vehicle Model

Optimal Coordinated Control of Active Steering and Direct Yaw Moment for Distributed-Driven Electric Vehicles

Wheel–rail contact model for railway vehicle–structure interaction applications: development and validation

Design of Mechanical Active Front Wheel Steering Experimental Platform Based on dSPACE