Abstract:For the manufacture of frost-resistant oil and petrol-resistant rubber products, one of the most widely used rubbers is nitrile-butadiene rubber (NBR) with a low acrylonitrile content of 17–20 %. However, the technical properties of its vulcanizates do not always meet all high performance requirements. Therefore, the study of the possibility of improving the technical characteristics of vulcanizates based on frost-resistant NBR is an urgent task. This paper presents the results of studying nitrile-butadiene rubber BNKS‐18AMN filled with ultra-high molecular weight polyethylene (UHMWPE). A feature of this work is the study of the possibility of increasing the technical properties of the obtained elastomeric composites by increasing the interaction between chemically inert UHMWPE and BNKS‐18AMN using the chemical modification of UHMWPE. The modification of UHMWPE was carried out by chemical etching in a solution of chromic acid for 3 and 20 hours. A complex of laboratory studies of the obtained samples was carried out. The influence of the duration of chemical etching of UHMWPE on the rheological and vulcanization properties has been studied on the analyzer of the processing of rubber. It is shown that the filling of UHMWPE into BNKS‐18AMN, in general, leads to an increase in the viscosity of the rubber compound. Chemical etching of UHMWPE leads to a decrease in the rate of vulcanization and the density of the three-dimensional spatial structure of the vulcanizate. The study of the physical and mechanical properties in tension, wear resistance during abrasion and swelling in standard hydrocarbon liquid for testing rubbers SZR‐3 showed that chemical etching of UHMWPE leads to a decrease in strength characteristics, but at the same time leads to an increase in resistance to abrasion and has no significant effect on swelling. The study of changes in the properties of samples after heat exposure showed that chemical etching of UHMWPE significantly reduces the resistance to thermal oxidative destruction in the presence of atmospheric oxygen, but does not affect the resistance to thermal aging in the SZR‐3 hydrocarbon environment

Nonhardening Sealants Based on Modified Nitrile Butadiene Rubber

Use of Liquid Rubber and Epoxy Resins in the Formulation of Sealants

Influence of Chemically Modified Ultra-High Molecular Weight Polyethylene on the Properties of Butadiene Nitrile Rubber

Effect of nitrile butadiene rubber hardness on the sealing characteristics of hydraulic O-ring rod seals

Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H 2 applications

Effect of Hydrothermal Aging on the Tribological Performance of Nitrile Butadiene Rubber Seals

EFFECT OF HEATING ON STRUCTURAL PARAMETERS OF NITRILE BUTADIENE RUBBER IN THE PRESENCE OF CHLORINE-CONTAINING COMPOUNDS

The development of optimal conditions for the synthesis of the nitrile-butadiene rubbers with enhanced frost resistance

MECHANOCHEMICAL MODIFICATION OF NITRILE-BUTADIENE RUBBER IN THE PRESENCE OF A CHLORINE-CONTAINING REAGENT

Preparation on Low-Temperature Resistance Nitrile-Butadiene Rubber Coat-Metal Sealing Gasket

Improvement of adhesive properties of modified epoxy-novolac resin by acrylonitrile-butadiene rubber grafted poly(chromium methacrylate)

Influence of Modified Epoxy Dian Resin on Properties of Nitrile-Butadiene Rubber (NBR)

HYDROGENATED BUTADIENE-ACRYLONITRILE-BUTYLACRYLATE RUBBER AND ITS PROPERTIES

A Molecular Dynamics Simulation Study on Enhancement of Mechanical and Tribological Properties of Nitrile—Butadiene Rubber with Varied Contents of Acrylonitrile

PROPERTIES OF WATER-SWELLABLE COMPOUNDS BASED ON NITRILE RUBBER WITH VARIED ACRYLONITRILE CONTENT

Study on the Effect of Halloysite Nanotubes on the Mechanical Properties and Swelling Resistance of Ethylene-Propylene Diene Monomer (EPDM)/Nitrile Butadiene Rubber (NBR) Blend Nanocomposites

Effect of epoxidized natural rubber on thermal properties, fatigue life, and natural weathering test of styrene butadiene rubber/recycled acrylonitrile‐butadiene rubber (SBR/NBRr) blends

Molecular chain orientation and mechanical properties of hydrogenated nitrile-butadiene rubbers with different acrylonitrile content and crosslink density

Improving the Mechanical/Anticorrosive Properties of a Nitrile Rubber-Based Adhesive Filled with Cerium Oxide Nanoparticles Using a Two-Step Surface Modification Method

Creation of special compositions based on butadiene-nitrile elastomers for diesels

Diimide-Mediated Hydrogenation of Nitrile Butadiene Rubber