Abstract:Polymer coatings have been widely used in the automobile industry for the corrosion protection of metallic materials. However, the failures of the polymer materials are caused by the extensive exposure of the coated steel to the aggressive electrolytes. To enhance the protective performance of the polymer coatings, functionalized nanoparticles are added to the polymers. The 2-aminothiazole (AT) modified TiO2–ZrO2 nanoparticles examined by Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy/energy-dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM), and X-ray diffractometry (XRD) were added to polyurethane (PU). The synthesized PU–AT/TiO2–ZrO2-coated specimen was studied by scanning electrochemical microscopy (SECM), potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) for their anti-corrosion and mechanical behaviours. EIS studies revealed excellent protection behaviour for the PU–AT/TiO2–ZrO2-coated steel in natural seawater. The coating resistance of the PU–AT/TiO2–ZrO2 nanocomposite was found to be 1970.17 kΩ.cm2, whereas lower coating resistance was observed for the pure polyurethane-coated steel (62.17 kΩ.cm2. It is found that the coating resistance of PU–AT/TiO2–ZrO2 nanocomposite is over 48% higher than that of the PU coating. The measured current by SECM investigation over the PU–AT/TiO2–ZrO2 nanocomposite coating was very low (1.4 nA) in comparison with the PU coating (6.1 nA). The surface morphological studies of the coated steel by SEM/EDX analysis and X-ray diffraction (XRD) analysis revealed that the TiO2–ZrO2 nanoparticles were enriched at the corrosion products which prevented corrosion initiation processes. The enhanced dynamic mechanical properties were noticed for PU–AT/TiO2–ZrO2 coating when the concentration of nanoparticles was 3 wt%. However, there was a decrease in their mechanical properties beyond 3 wt% because of the aggregation of nano-TiO2–ZrO2 particles in the PU matrix. The resulting PU–AT/TiO2–ZrO2 formulation exhibits an excellent hydrophobic behaviour (WCA: 116.9º). Therefore, it was concluded from the investigations that the newly synthesized PU–AT/TiO2–ZrO2 nanocomposite provided excellent barrier, mechanical, and hydrophobic properties due to the addition of AT/TiO2–ZrO2 nanoparticles to the polyurethane which prevented the degradation of materials and helped to prolong the life of the coated steel.

Preparation and antiaging performance of urushiol-titanium polymer/α-zirconium phosphate composite coatings

In-situ intercalation of montmorillonite/urushiol titanium polymer nanocomposite for anti-corrosion and anti-aging of epoxy coatings

Hydrophobic Al2O3/SiO2/PDMS Composite Coatings for Anti-corrosion Application of 304 Stainless-Steel

Urushiol titanium polymer‐based composites coatings for anti‐corrosion and antifouling in marine spray splash zones

Improvement of the Abrasion and Corrosion Resistance of a Waterborne Epoxy Coating by α-ZrP@PTA-Ce(III) with Dual Corrosion Inhibition Effects

Constructing multi-protective functional polyurethane composite coating via internal-external dual modification: Achieving superhydrophobicity, enhanced barrier, corrosion inhibition, and UV aging resistance properties

High anticorrosion performance of polyvinyl butyral/carbonized polyaniline/modified titanium dioxide composite coating

Preparation and Corrosion Resistance of AKT-Waterborne Polyurethane Coating

Fabrication of "wooden ear"-like filler and anti-corrosion of composite coating under high temperature environment

Impact of ultraviolet aging on the composition and characteristics of multifunctional composite coatings

Preparation of a High‐Performance Anti‐Aging Polypropylene Composite with Titanium Oxide and Calcium Sulfate Shielding Agents

Electrochemical and dynamic mechanical properties of polyurethane nanocomposite reinforced with functionalized TiO2–ZrO2 nanoparticles in automobile industry

Polyurethane Nanocomposite Coatings Coupled with Titanium-Based Conversion Layers for Enhanced Anticorrosion, Icephobic Properties, and Surface Protection

Fabrications of hybrid Polyurethane-Pd doped ZrO2 smart carriers for self-healing high corrosion protective coatings

Composite ceramic coating with enhanced thermal shock resistance formed by the in-situ synthesis of nano-ZrO2

Microstructure and high-temperature oxidation behaviour of anti-oxidation coating on zirconium alloys: An overview

Enhancing the protective performance of anti-impact, corrosion resistant and flame retardant polyurea coatings using bio-based supramolecular decorated montmorillonite

Corrosion Resistance of P2 Inhibitor Treatment of Aluminum Alloy

Preparation of HTV silicone rubber with hydrophobic–uvioresistant composite coating and the aging research

Combined application of silica particles and zirconium hydrogen phosphate coating to improve the friction resistance and osteogenic/anti-inflammatory properties of micro-arc oxidation-treated titanium

Improvement of the Tribological Properties and Corrosion Resistance of Epoxy–PTFE Composite Coating by Nanoparticle Modification