Abstract:Currently, waste generation is a huge problem all over the world. The largest source of generated waste is plastics from plastic packaging made of polyethylene and polypropylene, including PET bottles. Modern ecology aims to reduce the carbon footprint by recycling plastics or by producing biodegradable plastics that are completely broken down by microorganisms into simple particles that occur naturally in nature. Polyethylene terephthalate (PET) has good mechanical properties but is resistant to microorganisms. As a result, it cannot be classified as a biodegradable plastic, but when it is reused for the production of utility products, it becomes a bioplastic. A good way to dispose of PET is to use it for the production of utility products, in which its good mechanical properties can be used. Concrete is a basic material, the consumption of which in the construction industry is enormous. One of the negative features of concrete is its low tensile strength, which can be improved with continuous or dispersed reinforcement. This paper presents the results of compressive and tensile-bending tests of concrete reinforced with dispersed “fibres” of a different length and width, which were produced by a prototype device from PET beverage bottles. The prototype device enables repeatable fibres with a width of 2 mm, and lengths of 38 mm, 62 mm, and 93 mm to be obtained. The highest flexural tensile strength of the concrete was achieved in the case of the PET fibres with a length of 62 mm. It turned out that concrete with such reinforcement has a higher bending tensile strength by 15 % in relation to the tensile bending strength of the concrete without the dispersed reinforcement. The PET fibres also improve compressive strength. PET fibres, in order not to deteriorate in the alkaline environment of concrete, must be secured with an appropriate chemical agent. The effect of concrete reinforcement with the recycled PET fibres was compared to the effect of dispersed reinforcement made of polypropylene and steel fibres. The highest bending tensile strength was obtained in the case of the concretes with the scattered PET reinforcement. However, the differences in the bending tensile strength of concrete are not big and are equal to 0.64 MPa for polypropylene fibres and only 0.09 MPa for steel fibres.

A Literature Review on Mechanical Properties of Waste PET Bottle Based Fibre

Compressive Strength of Waste PET Bottle Based Fibre

A Review on the Formulation and Rupture Properties of Polyethylene Terephthalate in a Mechanical Recycling Context

A comprehensive review on mechanical and durability properties of cement-based materials containing waste recycled glass

Evaluation of eco-friendly concrete having waste PET as fine aggregates

Development and characterization of sustainable 3D printing filaments using post-consumer recycled PET: processing and characterization

Polyethylene Terephthalate (PET) Bottle-to-Bottle Recycling for the Beverage Industry: A Review

Feasibility of PET Resin as a Cement Substitute for Sustainable Construction

Comprehensive Review of Geotechnical Engineering Properties of Recycled Polyethylene Terephthalate Fibers and Strips for Soil Stabilization

Estudio experimental del uso de residuos de botellas de plástico en el hormigón convencional

A comprehensive summary on the enhancement of properties of concrete with recycled polypropylene materials

Tests Regarding the Effect of Dispersed Reinforcement Made with a Prototype Device from PET Beverage Bottles on the Strength Properties of Concrete

Synergistic effect on the mechanical, thermal, and tribology characteristics of modified natural fibre composites with perforated waste PET

On the Cementitious Mixtures Reinforced with Waste Polyethylene Terephthalate

Recent Advances in Biological Recycling of Polyethylene Terephthalate (PET) Plastic Wastes

Physical, mechanical, and durability properties of concrete containing different waste synthetic fibers for green environment - A critical review

Applications of waste polyethylene terephthalate (PET) based nanostructured materials: A review

High value-added conversion and functional recycling of waste polyethylene terephthalate (PET) plastics: a comprehensive review

Impact of plastic waste fiber and treated construction demolition waste on the durability and sustainability of concrete

Biological Recycling of Polyethylene Terephthalate: A Mini-Review