Abstract:Abstract All metal progressing cavity pump(AMPCP) has excellent high temperature resistance and corrosion resistance and shows good adaptability in heavy oil production. With the development of pump processing techniques and manufacturing, the performance and reliability of AMPCP have been improved rapidly. However, the wear failure issue of the AMPCP s still considerably severe, leading to high total-life-cycle cost and limiting the commercial application of the products. This paper discussed the mechanism of the wear behavior of AMPCP through numerical simulation and experimental analysis. The main influencing factors of AMPCP wear failure are analyzed as well, which plays an essential guiding role in the pump optimization design. This paper presents the numerical simulation of the wear behavior of AMPCP under different clearances, structural parameters, and operating speeds and discusses the influence of these parameters on the friction torque and wear behavior. Studies show a series of valuable results: 1) The clearance value between rotor and stator has the most significant impact on the amount of wear. With the change of the pump clearance, the change in the contact area and the amount of wear between the stator and the rotor performs a nonlinear relationship. 2) Although eccentricity changes the inertia effect caused by the eccentric movement of the rotor to a certain extent, it has little effect on the overall friction and wear. 3) The amount of wear and the rate of wear are linearly related to the speed, i.e. the higher the speed, the faster the wear increases. However, there is little difference in the amount of wear at different speeds for high viscosity lifted fluids. In this paper, the wear analysis model of AMPCP is established for the first time. The evolution of the wear bands between the stator and rotor of the AMPCP is demonstrated by a three-dimensional explicit dynamic model, and the influence of different factors on the wear of AMPCP is discussed in detail. This paper has laid a necessary theoretical foundation for the optimization design of AMPCP. It also applies essential guidance for further improving the operating performance of AMPCP.

Wear in centrifugal pumps with causes, effects and remedies: A Review

Computational Methods of Erosion Wear in Centrifugal Pump: A State-of-the-Art Review

Condition Monitoring Approach for Wear Recognition in Gear Pump

An Effective Method for Improving the Lifetime of Double Acting Vane Pump

Review on computational fluid dynamics based analysis of surface erosion in hydraulic machinery

Wear performance analysis and simulation of external gear pump

A literature survey on abrasive wear in hydraulic machinery

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

A review on the hydraulic performance and erosion wear characteristic of the centrifugal slurry pump

Causes of gear pump fails and methods for their elimination

Study on Erosive Wear and Novel Wear-Resistant Materials for Centrifugal Slurry Pumps

Study on Wear Characteristics of a Guide Vane Centrifugal Pump Based on CFD–DEM

Wear Failure Mechanism and Main Influencing Factors of All-Metal Progressing Cavity Pump AMPCP

Investigation on wear induced by solid-liquid two-phase flow in a centrifugal pump based on EDEM-Fluent coupling method

Energy Saving Design and Operational Optimization of Centrifugal Pump Network: A Review

A methodology for detection of wear in hydraulic axial piston pumps

Internal Flow Structure, Fault Detection, and Performance Optimization of Centrifugal Pumps

Numerical modeling on friction and wear behaviors of all-metal progressive cavity pump

Enhancing Lubrication Efficiency and Wear Resistance in Mechanical Systems through the Application of Nanofluids: A Comprehensive Review

A comprehensive review on the flow characteristics and erosion wear of the various multi-phase flow handling equipment

Research on Wear Properties of Centrifugal Dredge Pump Based on Liquid-Solid Two-Phase Fluid Simulations