Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Ongoing research in additive manufacturing towards structural and industrial application has led to the use of commingled roving as a manufacturing feedstock for printing high fiber volume fraction composites. The prospects of using this technology for high performance applications necessitates the need for a comprehensive experimental investigation into the effects of processing parameters on the quality of an additively manufactured composite printed from commingled roving feedstock. In this work, transverse flexure and void fraction matrix pyrolysis testing are both performed to evaluate composite quality. The transverse flexure test is a testing approach that evaluates the quality of the interfacial fiber-matrix bond while the void fraction test estimates the void content in the printed composite. A full observational study consisting of 27 different test combinations is done to investigate the effects of three different process parameters namely, temperature, pressure, and print speed across three different levels. Composite samples were made from commingled roving of E-glass and amorphous PET using an in-house built continuous fiber composite digital manufacturing system. Least squares regression analysis is performed to study the main, interaction and quadratic effects of process parameters. A statistical regression model having an R2 adjusted value of 80.1% is generated from the transverse flexure study, which is used to explain main and interaction effects and also predict performance. Response surface plots are also generated and are used to optimize process parameters which can subsequently be of help in scaling up composite manufacturing. Results show that all three process parameters are highly statistically significant at the 0.01 level of significance. Pressure * Temperature and Pressure * Printspeed are significant interaction terms. Pressure plays a weightier role when print speed is increased or temperature is decreased as it closes more voids that would ordinarily have been introduced because of drop in polymer melt viscosity. Micrographic analysis is also performed.

Autoclave process parameters affecting physical properties of carbon fiber reinforced polymer composite laminates using response surface methodology

Optimization of Process-Induced Residual Stresses in Automated Manufacturing of Thermoset Composites

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Comparative Study on the Effect of Cure Parameters on Residual Deformation for Thermoset Composite Laminates

Cure-dependent Volatile Release and Its Influence on Porosity of Carbon Fibre Reinforced Bismaleimide Composites

Study of the curing process of carbon fiber reinforced resin matrix composites in autoclave processing

Experimental and statistical study on the effect of process parameters on the quality of continuous fiber composites made via additive manufacturing

Experimental Analysis of Pre-Forming Parameters on Abnormalities, Thickness, and Void Content of Glass/Epoxy Composite In VBO-Oven Cure Manufacturing

Interface Controlled Micro- and Macro-Mechanical Properties of Vibration Processed Carbon Fiber/Epoxy Composites

Pressure window analysis for thin laminated composites in autoclave process

Curing Kinetics and Mechanical Properties of the Epoxy Vitrimer Based on Transesterification and Its Composite Laminates

Simulation and validation of air flow and heat transfer in an autoclave process for definition of thermal boundary conditions during curing of composite parts

Influence of compaction and curing in the Automated Fiber Placement Process on the mechanical performance of composite laminates

Pressure Monitoring Technology During Autoclave Process of Advanced Composites

Numerical Analysis of Micro-Residual Stresses in a Carbon/Epoxy Polymer Matrix Composite during Curing Process

Impact of Fiber‐type and Autoclave‐treatment at Different Temperatures on the Mechanical Properties and Interface Performance of Various Fiber‐reinforced 3d‐printed Composites

Effect of Microwave Curing Process on the Flexural Strength and Interlaminar Shear Strength of Carbon Fiber/bismaleimide Composites

Consolidation and Cure Simulations for Laminated Composites

Online Monitoring and Analysis of Resin Pressure Inside Composite Laminate During Zero‐bleeding Autoclave Process

Mechanical performance of out-of-autoclave composites manufactured by automated fiber placement

Numerical and Experimental Study of the Bleeder Flow in Autoclave Process