Abstract:A complementary electrolyte system with 0.8 M lithium bis(fluorosulfonylimide) (LiFSI) salt and 2 wt % lithium perchlorate (LiClO4) additive in fluoroethylene carbonate (FEC)/ethyl methyl carbonate (EMC) solution enables not only stable cycling of lithium metal batteries (LMBs) with practical loading (<30 μm lithium anode, cathode loading > 4 mAh/cm2) but also outstanding degradation stability toward the end of cycle life when compared to the conventional electrolyte. Although the use of LiFSI salt can increase the electrolyte conductivity and lengthen the cycle life of LMBs, the aged lithium anode morphology formed by the sacrificial decomposition of LiFSI is highly porous, leading to an abrupt cell capacity drop toward the end of cycling. Moreover, the inability to stop aluminum corrosion by the LiFSI-based electrolyte also causes cracking of the cathode tab during prolonged cycling. It is observed that a highly porous aged lithium consumed electrolyte at a higher rate, leading to the dry-out of electrolyte solvents. On the contrary, dense aged lithium anode morphology increased the localized current applied on the lithium, causing the formation of lithium dendrite. Thus, porosity control is the key to enhance battery performance. In this complementary system, LiClO4 was introduced as an advanced additive to not only improve the capacity retention rate but also mitigate the abrupt capacity drop toward the end of cycle life because LiClO4 acted as a pore astringent reducing the porosity of the aged lithium metal anode to the desired level. Moreover, the addition of LiClO4 can also suppress the Al corrosion, allowing stable high-voltage cycling of LMBs. The synergistic effect of combining LiFSI salt and a LiClO4 additive leads to an electrolyte system that can facilitate the application of high-energy LMBs with practical electrode loading.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03017?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03017</a>.Brief statement in a nonsentence format listing the contents of the material; chemical structures and acronyms of carbonates, fluorinated carbonates, and lithium salts; pristine NMC622 cathode; backside (Al current collector) of the harvested electrode aged in the LiFSI/FEC/EMC electrolyte; Capacity retention and electrochemical impedance spectra of Li/NMC622 cells with different electrolytes; XPS spectra of C 1s, F 1s, S 2p, and Cl 2p for the pristine and harvested lithium anodes after formation under different electrolytes; Tafel plots obtained from the CV test in the Li/Cu cell with various FEC/EMC electrolytes; and SEM image of the Al working electrode before and after potentiostatic hold under different electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03017/suppl_file/am1c03017_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Influence of Long-Term Storage Conditions on Lithium Metal Anode Surface in Liquid Carbonate-Based Electrolyte

Real time lithium metal calendar aging in common battery electrolytes

Unraveling and Mitigating the Storage Instability of Fluoroethylene Carbonate-Containing LiPF6 Electrolytes to Stabilize Lithium Metal Anodes for High-Temperature Rechargeable Batteries

Tailoring the Passivation Layer on Lithium Metal Anode and Aluminum Collector by Regulating the Solvation Structure to Enhance the Long-Term Cycling of Lithium Metal Batteries

Complementary Electrolyte Design for Li Metal Batteries in Electric Vehicle Applications

Depletion of Electrolyte Salt Upon Calendaric Aging of Lithium-Ion Batteries and its Effect on Cell Performance

Prolonged Life Lithium Metal Batteries Enabled by Introducing Abundant Lithium Nitrate in Commercial Carbonate Electrolytes

Influence of Carbonate Electrolyte Solvents on Voltage and Capacity Degradation in Li‐Rich Cathodes for Li‐ion Batteries

Impact of aging on the thermophysical properties of lithium-ion battery electrodes

Efficient Low-Temperature Cycling of Lithium Metal Anodes by Tailoring the Solid-Electrolyte Interphase

Revealing the Overlithiation Effect on Cycling and Calendar Aging of a Silicon/graphite Electrode for High-Energy Lithium-Ion Batteries.

Adjusting Interfacial Reactions for Achieving Highly Stable Operation in Lithium Metal Batteries

Revealing the Overlithiation Effect on Cycling and Calendar Aging of the Silicon/Graphite Electrode for High-Energy Lithium-Ion Batteries

Structural and Chemical Evolutions of Li/Electrolyte Interfaces in Li-Metal Batteries: Tracing Compositional Changes of Electrolytes under Practical Conditions

Unraveling the Effect of Short-Term High-Temperature Storage on the Performance and Thermal Stability of LiNi0.5Co0.2Mn0.3O2/graphite Battery

Colloid Electrolyte with Changed Li+ Solvation Structure for High‐Power, Low‐Temperature Lithium‐Ion Batteries

The Effect of Elevated Temperature on the Accelerated Aging of LiCoO2/mesocarbon Microbeads Batteries

Reinforced interface endows the lithium anode with stable cycle at high-temperature of 80 degrees C

Systematic Investigation of Electrochemical Performances for Lithium-Ion Batteries with Si/Graphite Anodes: Effect of Electrolytes Based on Fluoroethylene Carbonate and Linear Carbonates

Extending the Calendar Life of LiNi0.8Co0.1Mn0.1O2-based Lithium-Ion Batteries Via Low-Temperature Storage