Production of Biodiesel by Ethanolic Transesterification of Sunflower Oil on Lateritic Clay- based Heterogeneous Catalyst

Emma Brice Happi Tchuessa,Igor W. K. Ouédraogo,Yohan Richardson,Sayon dit Sadio Sidibé
DOI: https://doi.org/10.1007/s10562-022-04177-y
IF: 2.936
2022-09-24
Catalysis Letters
Abstract:Catalysts based on natural and widely available materials have attracted considerable attention for the transesterification reaction of vegetable oils into biodiesel. This work provides a straightforward process for the preparation of efficient KOH/Lateritic clay-based catalysts by wet impregnation followed by calcination. The catalysts were characterized by X-ray fluorescence, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), titration method of Hammet indicator, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The best catalyst was obtained with KOH/LKa mass ratio of 1/1, activated at 400 °C for 2 h calcination time. It was shown that the catalytic activity of KOH/Lateritic clay-based catalyst is due to both potassium ferrite (KFeO 2 ) and potassium silicate (K 2 SiO 3 ) crystalline phases. The catalyst has a high catalytic activity in the conversion of sunflower oil into biodiesel in the presence of ethyl alcohol. The percentage of conversion into ethyl esters of 99.80% was obtained under conditions of 1 h of reaction time at 70 °C, 5wt% catalyst loading and an ethyl alcohol/oil molar ratio of 9:1. The KOH/LKa 1/1–400 catalyst afforded reasonable biodiesel yield up to 3 and 4 cycles for respectively 5 and 10 wt% catalyst loading. The physicochemical specification of the biodiesel obtained matches with ASTM D 6571 and EN 14,214 requirements. KOH/LKa 1/1–400 catalyst appeared to be promising candidate to replace conventional homogeneous catalysts for biodiesel production as the reaction times are low enough to be practical in batch processes.
chemistry, physical
What problem does this paper attempt to address?