Abstract:Phase change material (PCM)/ceramic composite is qualified to be a novel composite thermal energy storage (TES) material, which can simultaneously utilize the latent heat of phase change materials and sensible heat of ceramic matrix materials to accomplish the storage and release of thermal energy. It exhibits a wide application prospect in the field of medium and high temperature thermal energy storage. However, based on the ceramic porous adsorption PCM, there is still the risk of leakage after the PCM melts in the thermal energy storage stage. In this paper, SnBi58 alloy microencapsulated phase change material (MEPCM) with high thermal reliability was prepared by “double-layer coating, sacrificing inner layer” method, which a thermal expansion void was constructed to accommodate volume expansion of PCM. On this basis, SnBi58 alloy MEPCM/ceramic composite was prepared by the cold-pressing sintering method and its thermal performance was studied. The experimental results show that SnBi58 alloy MEPCM/ceramic composite does not leak at the MEPCM/Matrix mass ratio of 2.5:1, but SnBi58 alloy/ceramic composite leaks at the SnBi58 alloy/Matrix mass ratio of 1.5:1, indicating that SnBi58 alloy MEPCM has good thermal reliability and leak resistance. In addition, compared with the ceramic matrix material, the latent heat of MEPCM/ceramic composite with a mass ratio of 2.5:1 is increased by 30.24 J/g and the thermal conductivity reaches 2.853 W/(m·K), which is 3.67 times of the matrix material. Furthermore, thermal performances of four MEPCM/ceramic composite with different proportions were tested and compared, including thermal conductivity, thermal response curve and infrared thermal imaging. The results show that the higher the proportion of MEPCM, the better the thermal performance of the MEPCM/ceramic composite. Moreover, to predict the thermal conductivity of the novel composites, six thermal conductivity models were compared based on the experimental results, and the results show that the prediction error of Maxwell-Eucken is the smallest which can be used to predict the thermal conductivity of MEPCM/ceramic composite. Finally, the thermal reliability of the composite was tested. The results of DSC and XRD showed that the thermal properties and chemical structure basically have no change before and after thermal cycling. MEPCM/ceramic composite has excellent thermal reliability.

Improved thermal and mechanical properties of [Ca24Al28O64]4+(4e−) electride ceramic by adding Mo metal

Fabrication and electron emission of [Ca24Al24.08Zr3.92O64]4+(4e−) electrides

X-band electromagnetic absorption and mechanical properties of mullite/Ti3AlC2 composites

High Performance NbMoTa–Al2O3 Multilayer Composite Structure Manufacturing by Laser Directed Energy Deposition

Single crystal to polycrystal: Enhanced dielectric loss and electromagnetic wave absorption of MoO2 ceramic at Gigahertz

Preparation, microstructure, and thermophysical properties of Cr3+-modified cordierite high emissivity ceramic for metal thermal protection

Thermal performance enhancement of high durability alloy microencapsulated phase change material (MEPCM)/ceramic composites based on industrial graphene

Fabrication of (Al2O3/CdO) metal and ceramic matrix composites reinforced CMC via laser ablation for optoelectronic applications‏

A Simplified and Facile Preparation Method for [Ca24Al28O64]4+(e)4 Electride

Structure of the metal matrix Mo-based alloy produced by the EBM method

High-entropy (Nd0.2Sm0.2Eu0.2Y0.2Yb0.2)4Al2O9 with good high temperature stability, low thermal conductivity, and anisotropic thermal expansivity

Synthesis, Characterization and Electrical Properties of the New Solid Electrolyte Materials Ce6 Xerxmoo15- (0.0 <x< 1.5)

Unlocking epoxy thermal management capability via hierarchical Ce-MOF@MoS 2 hybrid constructed by in-situ growth method

Low-Temperature Sintering and Microwave Dielectric Properties of CaMoO4 Ceramics

A novel dielectric ceramic Na0·48La0·52MoO4 with excellent thermal stability for LTCC applications

Synthesis, Reduction, and Electrical Properties of Macroporous Monolithic Mayenite Electrides with High Porosity

Enhanced Thermoelectric Performance of Heavy-Metals (M: Ba, Pb) Doped Misfit-Layered Ceramics: (ca2−xmxcoo3)0.62 (Coo2)

Multifunctional MoCx Hybrid Polyimide Aerogel with Modified Porous Defect Engineering for Highly Efficient Electromagnetic Wave Absorption

MoB2/MoB Ceramic Particulate Reinforced W-1 Wt % Ni Matrix Composites As Potential Plasma Facing Materials

Synthesis, microstructure, and properties of high purity Mo2TiAlC2 ceramics fabricated by spark plasma sintering

Preparation and thermal performance of a novel alloy microencapsulated phase change material (MEPCM)/ceramic composite