Abstract:Recently, the large-scale deployment of electric vehicles (EVs) and stationary battery systems has put forward urgent requests for rechargeable batteries with higher energy/power density and longer lifespans. As such, next-generation Li-ion batteries (LiBs) are expected to meet these requirements. The possibility of using Ni-rich high-capacity cathode materials (NMC) can help to achieve that goal, however, they still suffer from significant capacity fade via several chemical and mechanical degradation modes. One is crack formation within secondary particles which leads to parasitic reactions that evolve oxygen and potentially initiate the formation of inactive crystal structures. LiBs mechanical and chemical degradation mechanisms can be extended by applying protective coatings to the cathode’s surface. Many studies explore atomic layer deposition (ALD) for this purpose. However, the complementary molecular layer deposition (MLD) technique might offer the benefit of depositing flexible hybrid coatings that can accommodate potential volume changes of the electrode during the battery cycling. This study reports the deposition of novel organic-inorganic films via the ALD-MLD method. Characterization analysis such as FTIR, XPS, SEM-EDS, and TEM confirmed the film deposition on the surface of the NMC electrode. Besides, the electrochemical results showed the enhancement of the coated electrode, as evidenced by providing a longer life with a 93% capacity retention after 150 cycles (3.0-4.4 V vs. Li/Li+), while the uncoated one retained only 83% of its initial capacity. Moreover, in situ dilatometry showed irreversible volume change for uncoated NMC while it was mostly reversible for coated ones during the cycling. It revealed the dilation behavior of the electrode, resulting in crack formation, which is significantly suppressed for the coated samples. Stable cycling of Ni-rich cathode materials in crucial conditions such as high voltage windows and elevated temperatures is still extremely challenging. To evaluate this, in situ dilatometry was performed at elevated temperatures (40 °C and 55 °C) and higher voltage ranges (3.0-4.6 V). The results confirmed that in both conditions, the dilation behavior of the coated sample is still under control while the capacity is comparable to the uncoated sample. This revealed that the coatings present good lithium-ion kinetics and reduce electrolyte decomposition. Overall, this work showed the liability of the ALD-MLD films deposited on NMC electrodes to mitigate the degradation mechanisms and provides insight into a method that seems promising as a protective and elastic coating for future high-energy lithium-ion battery cathodes. Figure 1

Tantalum Oxide Coating of Ni-rich Cathode Active Material via Atomic Layer Deposition and its Influence on Gas Evolution and Electrochemical Performance in the Early and Advanced Stages of Degradation

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Ta doping and LiTaO3 coating to improve the electrochemical performance of LiNi0.925Co0.03Mn0.045O2 cathode material for lithium ion batteries

Enhancing the Stability and Performance of Ni-rich Cathode Materials through Ta Doping: A Combined Theoretical and Experimental Study

Comprehensive study of Ti and Ta co‐doping in Ni‐rich cathode material LiNi0.8Mn0.1Co0.1O2 towards improving the electrochemical performance

Stabilized Positive Electrode Material to Enable High Energy/Power Density Lithium-Ion Batteries

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Two birds with one stone: One-pot concurrent Ta-doping and -coating on Ni-rich LiNi0.92Co0.04Mn0.04O2 cathode materials with fiber-type microstructure and Li+-conducting layer formation

Enhanced cycling stability of nickel-rich layered oxide by tantalum doping

Improved Electrochemical Performance of LiNi0.5Mn0.3Co0.2O2 Electrodes Coated by Atomic-Layer-deposited Ta2O5

Improvement of electrochemical properties of lithium-rich manganese-based cathode materials by Ta2O5

Surface and grain boundary coating for stabilizing LiNi0.8Mn0.1Co0.1O2 based electrodes

Multi‐Element Surface Coating of Layered Ni‐Rich Oxide Cathode Materials and Their Long‐Term Cycling Performance in Lithium‐Ion Batteries

Improving the Structure Stability of LiNi 0.8 Co 0.15 Al 0.05 O 2 by Double Modification of Tantalum Surface Coating and Doping

Comprehensive study of tantalum doping on morphology, structure, and electrochemical performance of Ni-rich cathode materials

Improvement of electrochemical performance of nickel rich LiNi0.6Co0.2Mn0.2O2 cathode active material by ultrathin TiO2 coating.

Atomic Layer Deposition of Al2O3 on LiNi0.68Co0.10Mn0.22O2 for Enhanced Electrochemical Performance

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Improved high-voltage cycling stability of single-crystalline LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode by tantalum doping

Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD

Improving the Performance of LiNi0.925Co0.065Mn0.01O2 via Ti4+& Nb5+ Co-Modifications