Thermomechanical behavior of shape memory alloy metal matrix composite actuator manufactured by composite extrusion

C Dahnke,A Reeb,F Pottmeyer,K A Weidenmann,A E Tekkaya,Christoph Dahnke,Andreas Reeb,Florentin Pottmeyer,Kay André Weidenmann,A. Erman Tekkaya

DOI: https://doi.org/10.1088/1361-665X/ab0ef5

IF: 4.1

2019-10-07

Smart Materials and Structures

Abstract:Continuous composite extrusion represents a new possibility for the manufacturing of shape memory alloy metal matrix composites (SMA-MMC). During the process SMA wires are embedded into aluminum or magnesium profiles by means of modified porthole dies. Due to the high flexibility regarding the profile geometry, the materials as well as number, thickness and position of the SMA elements, the process can be used for the generation of a profile integrated bending function. The bending function of the actuator profile depends on the temperature and is thermally activated. The parameters influencing the behavior of the manufactured composited actuators are experimentally investigated. It is found that the radius of curvature mainly depends on the recovery stress and the eccentric position of the SMA wire as well as on the bending stiffness of the actuator profile. The bending mechanism and the experimental results are described by the use of an analytical model as well as a finite element analysis. Based on the results the analytical model is used for the targeted design of a profile with multiple embedded NiTi wires, which is able to perform a repeatable, pure elastic deflection within a defined temperature range between room temperature and 75 °C. Shape memory alloys (SMA) offer unique properties such as the shape memory effect, pseudo-elasticity and a good biocompatibility. Due to these properties SMA are highly attractive for medical applications as well as actuators in various industrial fields. Beyond that, SMA become more and more interesting as a functional material within composites. Over the last years, various approaches for the production of shape memory alloy metal matrix composites (SMA-MMC) have been investigated. The composites possess improved mechanical properties and even show potential for an actuator functionality [ 1 ]. In the field of MMC aluminum is mainly used as matrix material due to the good formability. To utilize the shape memory effect (SME) in a composite, Lester et al [ 2 ] mention two fundamental ways. The strategy of active property tuning (APT) is based on the transformation of undeformed SMA elements from the martensitic to the austenitic state, which leads for instance to an increase of the Young's modulus. The strategy of active strain energy tuning (ASET) refers to initially elongated SMA elements, which are striving to recover their original shape, when the temperature is increased to a certain material depending value. The constrained recovery leads to the induction of compressive stresses into the matrix material. With regard to the processing of SMA-MMC, the application of the mentioned strategies is challenging. Beside the required thermomechanical treatment, the manufacturing technology has to provide sufficient bonding of both materials to transfer the occurring stresses. In this regard, Ni and Ma [ 3 ] mention casting, hot pressing, friction stir processing, ultrasonic additive manufacturing and extrusion as known processes for the manufacturing of SMA-MMC. The most common processes are casting and hot pressing. Casting of aluminum was used by Furuya et al [ 4 ] to infiltrate NiTi fibers and NiTi particles [ 5 ]. Rohatgi [ 6 ] used casting as well to embed NiTi wires in aluminum. Mechanical testing of the composites showed a significant increase of Young's modulus, yield stress, work-hardening rate, resistance to fracture and ductility. Even the potential of a self-healing property could be shown. Occurring cracks could be closed due to the contraction of the NiTi wires at elevated temperatures. Powder-metallurgy and hot-pressing were used by Miranda et al [ 7 ] to produce SMA-MMC from AlSi-powder and NiTi fibers. Aydogmus [ 8 ] combined magnesium powder while NiTi powder and Porter et al [ 9 ] used AA1090 aluminum powder and NiTi powder. Due to a high bonding quality the composites showed an increased shear strength, yield and ultimate strength as well as an increase of fatigue life. Park et al [ 10 ] used hot-pressing under vacuum conditions followed by a subsequent cold-rolling process to produce TiNi/AA6061 composites. It could be shown that the crack propagation can be delayed with increasing volume fraction of the TiNi fiber. Vacuum hot pressing was also used by Armstrong and Kino [ 11 ]. AA6061 sheets were pressed on NiTi wires. Based on this work, Armstrong and Lorentzen [ 12 ] produced NiTi/AA6082 composites with the similar processing technique. Beside the increase of the yield strength, ultimate strength and fracture strain, the specimens s -Abstract Truncated-

materials science, multidisciplinary,instruments & instrumentation