Abstract:At a former uranium mill site where tailings have been removed, prior work has determined several potential ongoing secondary uranium sources. These include locations with uranium sorbed to organic carbon, uranium in the unsaturated zone, and uranium associated with the presence of gypsum. To better understand uranium mobility controls at the site, four single-well push–pull tests (with a drift phase) were completed with the goal of deriving aquifer flow and contaminant transport parameters for inclusion in a future sitewide reactive transport model. This goes beyond the traditional use of a constant sorption distribution coefficient (Kd) and allows for the evaluation of alternative remedial injection fluids, which can produce variable Kd values. Dispersion was first removed from the resulting data to determine possible reactions before conducting reactive transport simulations. These initial analyses indicated the potential need to include cation exchange, uranium sorption, and gypsum dissolution. A reactive transport model using multiple layers to account for partially penetrating wells was completed using the PHT-USG reactive transport modeling code and calibrated using PEST. The model results quantify the hydraulic conductivity and dispersion parameters using the injected tracer concentrations. Uranium sorption, cation exchange, and gypsum dissolution parameters were quantified by comparing the simulated versus observed geochemistry. All simulations required some cation exchange and calcite equilibrium, and one simulation required gypsum dissolution to improve the model fit for calcium and sulfate. Uranium sorption parameters were not strongly influenced by the other parameter values but were highly influenced by uranium concentrations during the drift phase, with possible kinetic rate limitations. Thus, a future recommendation for such push–pull tests is to collect more geochemical data during the drift phase. The final uranium sorption parameters were within the range of values determined from prior column testing. The flow and transport parameters derived from these single-well push–pull tests will provide initial parameters for any future sitewide reactive transport model.

Evaluation of push–pull tracer tests for estimating groundwater velocity in a fractured-rock aquifer

A novel four phase slug single-well push-pull test with regional flux:forward modeling and parameter estimation

Revisiting simplified model of a single-well push–pull test for estimating regional flow velocity

Numerical analysis for estimating residual DNAPL by single-well"push-pull"partitioning tracer tests

Inferring subsurface heterogeneity from push-drift tracer tests

Estimating kinetic mass transfer by resting-period measurements in flow-interruption tracer tests

Single-Well Push–Pull Tracer Test Analyses to Determine Aquifer Reactive Transport Parameters at a Former Uranium Mill Site (Grand Junction, Colorado)

Hydrogeophysical characterization of transport processes in fractured rock by combining push-pull tracer tests and single-hole ground penetrating radar

The effect of boundary conditions on the single-well push-pull test in a partially penetrated well

A method for evaluating horizontal well pumping tests

New model of Single-Well Push-Pull thermal test in a Fracture-Matrix system

Investigating the Representative of Aquifer Transmissivity Determined by Passive Response Methods: A Comparison With Time‐Dependent Hydraulic Parameters Inferred From Different Stages of Pumping Tests

Estimation of Groundwater Flow Rate by an Actively Heated Fiber Optics Based Thermal Response Test in a Grouted Borehole

A new solution to transient single-well push-pull test with low-permeability non-Darcian leakage effects

An Analysis of Tracer Flowback Profiles to Reduce Uncertainty in Fracture-Network Geometries

Pumping tests analyses of a heterogeneous pore aquifer based on the Generalized Radial Flow model

Application of micro-substance tracer test in fractured horizontal wells

A Tracer Method to Determine Hydraulic Conductivity and Effective Porosity of Saturated Clays Under Low Gradients

Field Measurements and Numerical Analyses of a Pumping-Recharge Test in a Deep Confined Aquifer

Interpreting Step‐Drawdown Pumping Test Undergoing Confined‐Unconfined Conversion with Well Loss

Practical pressure-transient analysis solutions for a well intercepted by finite conductivity vertical fracture in naturally fractured reservoirs