Abstract:Purpose Water from different sources generally contains different kinds of suspended particles, which introduces the challenge of how to control physical clogging during managed aquifer recharge (MAR). Suspended solid concentration (SS) and turbidity (NTU) are widely recognized as indicators of physical clogging potential. The aims of this study were to examine the degree of physical clogging caused by organic and inorganic suspended particles and elaborate the different mechanisms that controlled clogging under specific SS and NTU conditions. Materials and methods Column experiments were performed by continuous suspended particle injection through a saturated porous medium under stable physicochemical and hydrodynamic conditions. Three sets of transport tests were carried out. One test was conducted with chlorinated-secondary wastewater (CSW), which SS was 17.59 ± 0.44 mg L −1 corresponding to 3.09 ± 0.05 NTU. The other two tests were silica-particle wastewater (SPW) with the same SS (1.73 ± 0.03 NTU) and the same NTU (29.21 ± 0.57 mg L −1 SS) as the CSW, abbreviated to SPW-SS and SPW-NTU, respectively. The particle breakthrough curves (BTCs), spatial deposition profiles, and variations in hydraulic conductivity were measured. The transport model, DLVO theory, and O’Melia and Ali clogging model were applied to explain the mechanisms of physical clogging in different systems. Results and discussion The retention of inorganic particles was greater than that of organic particles; 56.02% of organic particles were retained in CSW, while 87.62 and 86.36% of inorganic particles were retained in SPW-SS and SPW-NTU, respectively. The distribution of organic particles was less uniform than that of inorganic particles. However, the variation of the relative hydraulic conductivity ( K / K 0 ) was more significant for organic particles than for inorganic particles, with decreased by just 1.80 ± 0.64% in SPW-SS and 4.03 ± 1.64% in SPW-NTU, but decreased by 85.86 ± 1.22% in CSW. This study explained the results with the support of classical models and the DLVO theory. The physicochemical characteristics of suspended particles determined whether and how physical clogging occurred. Conclusions Suspended particles with different properties follow different transport-deposition processes and have different tendencies to cause physical clogging. Especially for organic particles, clogging degree is quite noticeable. Our results imply that the same SS and NTU threshold values cannot be applied to different types of source water during recharge to prevent physical clogging, even in the same controlled environmental conditions. Physicochemical characteristics of suspended particles need to be considered when developing physical clogging indicators.

Effect of Filter Clogging on the Determination of Concentrations of Chemical Elements Migrating in River Water as Components of True Solutions or in Colloidal Forms

Challenges in using 0.45 µm filters to assess potentially bioavailable trace elements in the dissolved fraction of river and peat bog waters of the Boreal Zone

Experiment Research on Physical Clogging Mechanism in the Porous Media and Its Impact on Permeability

Impact of storage temperature and filtration method on dissolved trace metal concentrations in coastal water samples

The effect of using jug-type water filters on selected metals concentration in tap water – a case study

Effects of Seasonal Biofouling on Diffusion Coefficients Through Filter Membranes with Different Hydrophilicities in Natural Waters.

On the Integrity of a Commercial Cassette Ultrafiltration Membrane: Implications for Marine Colloidal Biogeochemistry

Filter Clogging in Coarse Pore Filtration Activated Sludge Process under High MLSS Concentration

Resolving Uncertainties in the Quantification of Trace Elements within Organic-Rich Boreal Rivers for AF4-UV-ICP-MS Analysis

Analysis of the Effect for Quantification of Trace Pollutants in Water Samples Using Filters of Various Materials in Pretreatment

Effect of Iron Cyclic Transformation on the Natural Purification of Antimony in Contaminated Reservoirs of Mines.

Nanoscale Iron (Oxyhydr)oxide-Modified Carbon Nanotube Filter for Rapid and Effective Sb(iii) Removal

The Impact of Clogging Issues at a Riverbank Filtration Site in the Lalin River, NE, China: A Laboratory Column Study

Determination of Heavy Metals in a Highly Porous Sorptive Filter Material of Road Runoff Treatment Systems with LA-ICP-MS

Colloidal Toxic Trace Metals in Urban Riverine and Estuarine Waters of Yantai City, Southern Coast of North Yellow Sea.

The Influence of Colloids on the Geochemical Behavior of Metals in Polluted Water Using As an Example Yongdingxin River, Tianjin, China.

Multi-element analysis of unfiltered samples in river water monitoring—digestion and single-run analyses of 67 elements

Transparent exopolymer particles-associated membrane fouling analyses of systems containing sodium alginate, calcium, iron, alum and their combination during dead-end ultrafiltration

Comparison of clogging induced by organic and inorganic suspended particles in a porous medium: implications for choosing physical clogging indicators

Transfer and Transport of Aluminum in Filtration Unit

Tracking Metal Ion-Induced Organic Membrane Fouling in Nanofiltration by Adopting Spectroscopic Methods: Observations and Predictions.