Abstract:For the purpose of investigating the damage mechanism and failure characteristics of tunnel lining under the strike-slip fault movements, a three-dimensional elastoplastic finite element model was established in the present study including a railway tunnel across an active strike-slip fault. With the assistance of this numerical model, the tensile and compressive damage, plastic strain development process, and shear failure of the secondary lining at different fault plane positions were analyzed, and further, the damage laws of the secondary lining at different fault displacement and tunnel-fault intersection angles were summarized. The simulation results showed that when the maximum imposed fault displacement is 30 cm, the most unfavorable fault plane appears at the junction between the moving block and the fracture zone, and serious tensile cracks and shear failures occur on each fault rupture plane. Besides, the maximum plastic strain and compressive damage are distributed in the vault and invert. In addition, with the increase of the fault displacement, the axial strain of the secondary lining increases as well, of which the main part shows the tensile strain. Interestingly, with the decrease of the crossing angle, the axial strain gradually changes from the tensile strain to the compressive strain, which is consistent with the direction of the fault angle. Furthermore, the tensile and compressive damage of the secondary lining increases with the increase of movement distance. At the same time, the tensile damage along the tunnel ring develops, and the compressive damage propagates mainly in tunnel vault and invert. With the decrease of the crossing angle, the degree of the tensile damage in the lining reduces, as well as its range. The compressive damage area of the lining develops from the vault and inverted arch to the tunnel wall on both sides, which has a trend of penetrating the side walls on both sides. The distribution area and maximum value of the overall lining damage indices in tensile (OLDT) and overall lining damage indices in compressive (OLDC) increase with the increase of fault movement distance. With the decrease of the crossing angle, the distribution range and maximum value of OLDT decrease, and the distribution range of OLDC increases, while the maximum value basically remains the same. The research results of the present work can provide reference for the antidislocation design of railway tunnels crossing strike-slip faults.

Study on the Mechanical Response Mechanism and Damage Behavior of a Tunnel Lining Structure under Reverse Fault Dislocation

Mechanical response and failure characteristics of tunnels subjected to reverse faulting with nonuniform displacement: Theoretical and numerical investigation

Numerical Analysis on the Structure Type and Mechanical Response of Tunnel Crossing Active Reverse Fault

Study on the Response of Tunnel Lining under Fault Dislocation

Study on Damage Evolution of Tunnel Lining under Strike-Slip Fault Movements

Experimental study on the damage performance and forced response of concrete lining in fault-crossing tunnel

Effects of Reverse Fault Dislocation Application Method for Tunnelling Through Active Faults

The damage mode and forced response characteristics of articulated lining structure: A case study of metro tunnel under a reverse fault action

Numerical Assessment of the Structural Damage of a Composite Lining Water Conveyance Tunnel Subjected to Reverse Fault Conditions

Response and failure mechanism of utility tunnel with flexible joints under reverse fault: An experimental, numerical, and analytical investigation

Experimental analysis of low-dip reverse fault dislocation effects on tunnel site models with different soil properties

Evaluation of the Mechanical Response of Tunnel Lining Induced by Reverse Faulting Using Numerical Simulations

Analysis of Damage Mechanism of Tunnel Lining Structure under the Coupling Action of Active Fault

Experimental study on the mechanical behavior of utility tunnel with flexible joints passing through active thrust fault

Structural Stress Characteristics and Joint Deformation of Shield Tunnels Crossing Active Faults

Deformation and failure mechanism of metro shield tunnel subjected to buried fault dislocation

Effects of the friction coefficient and location of the dislocation surface of an active fault on the mechanical response of a freeway tunnel

Longitudinal mechanical response of tunnels under reverse faulting and its analytical solution

Deformation and failure of overburden soil subjected to normal fault dislocation and its impact on tunnel

Structural Response of a Prefabricated Utility Tunnel Subject to a Reverse Fault

Mechanical Response Study of a Cross-Fault Water Conveyance Tunnel under the Combined Action of Faulting Dislocation and Seismic Loading