Abstract:Abstract Internal cooling structures for gas turbine engines are becoming more complicated to push the hot gas temperature as high as possible, which, however, allows particulates drawn into the coolant air to be more readily to deposit within these passages and thus greatly affect their flow loss and thermal performance. In this study, internal swirl cooling and jet impingement cooling subjected to particulate deposition were evaluated and compared using a conjugate heat transfer method, with an emphasis on the thermal effects of the insulative deposits. To accomplish the goal, an unsteady conjugate mesh morphing simulation framework was developed and validated, which involved particle tracking in an unsteady fluid flow, particle–wall interaction modeling, conjugate mesh morphing of both fluid and solid domains, and a deposit identification method. The swirl and the jet impingement cooling configurations modeled the internal cooling passage for the leading-edge region of a turbine blade and were investigated in a dust-laden coolant environment at real engine conditions. Coupling effects between the dynamic deposition process and the unsteady flow inside the two cooling channels were examined and the insulative effects of the deposits were quantified by comparing the temperatures on the external and internal surfaces of the metal channel walls, as well as on the deposit layers. Results demonstrated the ability of the newly developed, unsteady conjugate simulation framework to identify the deposits from the original bare wall surface and to predict the insulation effects of the deposits in the dynamic deposition process. The dust almost covered the entire impingement channel, while deposits were only seen in the vicinity of the jets in the swirl channel. Despite this, a dramatical decrease of convection heat transfer was found in the swirl channel because the swirling flow was sensitive to the interruption of the deposits. In contrast, the deposits improved the heat transfer rate in the impingement channel. When the thermal effects of the deposit layer were taken into account, the wall temperatures of both two cooling geometries were substantially elevated, exceeding the allowable temperature of the metal material. Due to the denser deposit coverage, the impingement channel wall had a greater temperature increase than the swirl channel. In terms of flow loss, the presence of the deposits inhibited the swirl intensity by interrupting the swirling flow and thus reduced the friction loss, whereas the pressure loss was improved by the deposits in the impingement cooling.

A method for roughness height prediction by particle deposition and its effect on flow and heat transfer in a turbine cascade

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

High-temperature deposition model for molten particle prediction based on droplet-surface interaction criteria

Simulation of particle deposition on high temperature turbine film cooling blade surface with dynamic mesh morphing

Simulation of surface deposits of micron sand particles in the internal cooling duct with a Gaussian probability density model

Unsteady simulations of deposition in a rotor passage of the first-stage turbine for an aero-engine

Numerical study on particle deposition characteristics of turbine blade with cooling film

Numerical Simulation of Turbulent Structure and Particle Deposition in a Three-Dimensional Heat Transfer Pipe with Corrugation

Numerical study of the fine particle deposition behaviors on three-dimensional random rough walls

Particle deposition from two-dimensional turbulent gas flows

Unsteady simulations of migration and deposition of fly-ash particles in the first-stage turbine of an aero-engine

Modeling particle deposition onto rough walls in ventilation duct

Distribution of non-spherical nanoparticles in turbulent flow of ventilation chamber considering fluctuating particle number density

Study of the Behavior of Dust Particles in Helium Turbines Considering the Effects of Particle Deposition and Resuspension

Numerical Investigation of the Erosion Behavior in Blades of Tidal Current Turbine

Simulation of Turbulent Flow Structure and Particle Deposition in a Three-Dimensional Heat Transfer Duct with Convex Dimples

Numerical Analysis of Leading-Edge Roughness Effects on the Aerodynamic Performance of a Thick Wind Turbine Airfoil

Numerical simulation of turbulent flow and particle deposition in heat transfer channels with concave dimples

Conjugate Heat Transfer Evaluation of Turbine Blade Leading-Edge Swirl and Jet Impingement Cooling With Particulate Deposition

Particle deposition in turbulent duct flows—comparisons of different model predictions

Numerical methodology for simulating particle deposition on superhydrophobic surfaces with randomly distributed rough structures