Abstract:This research discusses the attitude tracking issue for hypersonic morphing vehicles (HMVs) subject to multisource uncertainty and limited system resources. Hypersonic vehicles with variable-span wings can change the aerodynamic configuration according to various requirement segments. However, A morphing process will cause significant changes in aerodynamic coefficients, mass distribution, and inertial characteristics. Moreover, the additional forces and moments exist in the HMV model, impacting the attitude control. Therefore, a robust and fast flight control system is necessary for HMVs to stabilize the attitude angles in the presence of multisource uncertainty, which always consists of modeling inaccuracies, external disturbances, and coefficient perturbances. Considering such factors, the fixed-time control theory is employed to develop the flight control system with strong robustness and adaptation. Compared to the existing fixed-time control strategies with complex expressions to indicate the convergence time, the setting time of the proposed controller is more explicit and can be exactly preassigned in the design procedure. Fast attitude tracking can be achieved and accurately evaluated with the help of the proposed technique. Furthermore, to avoid excessive occupation of limited aircraft resources, a novel switched dynamic event-triggered technique is constructed, leading to a desired level of control performance with low resource consumption. The proposed event-triggering mechanism will strike a better balance between tracking accuracy and resource occupation than the commonly used triggered control methods, such as the fixed-threshold and relative-threshold event-triggering strategy. Finally, the event-triggered fixed-time controller provides an outstanding tracking performance, with the Zeno behavior avoided. The stability of the closed-loop system is proved by introducing the Lyapunov theory. Simulation results and comparisons validate the effectiveness and advantages of the developed control scheme.

Analysis and Control for the Mode Transition of Tandem-Wing Aircraft with Variable Sweep

Unsteady Flow Simulation of a Variable-Sweep Morphing Aircraft Coupled with Flight Control System

Adaptive Sliding Mode Control with Transition Process for Flapping Wing Aerial Vehicle

Mechanism Analysis of Hysteretic Aerodynamic Characteristics on Variable-Sweep Wings

Analysis of the Short-Term Dynamics of Morphing Aircraft Caused by Shape Change Based on the Open-Loop Response and the Reachable Set Theory

L1 Adaptive Control Based on Dynamic Inversion for Morphing Aircraft

Multidisciplinary Performance Enhancement on a Fixed-wing Unmanned Aerial Vehicle via Simultaneous Morphing Wing and Control System Design

ADRC-based Longitudinal Control for Novel Flight Vehicle with Moving Mass

Control Design and Flight Test of Aerodynamics-Driven Monoplane–Biplane Morphing Aircraft

Adaptive Robust Wing Trajectory Control And Force Generation Of Flapping Wing Mav

Fixed-time sliding mode control for hypersonic morphing vehicles via event-triggering mechanism

Design of Active Disturbance Rejection Control System for Morphing Flight Dynamics

Dynamic characteristics analysis and robust transition control of tail-sitter VTOL UAVs

A Hinge Moment Alleviation Control Strategy for Morphing Tail Aircraft Based on a Data-Driven Method

Aerodynamics of an Adaptive Wing for MAVs

Design, kinematic and fluid-structure interaction analysis of a morphing wing

An unsteady aerodynamic force calculation method for shear variable-sweep wing considering sweep angle and airfoil changes

Event-triggered Attitude Control for Hypersonic Morphing Vehicles Using Fixed-time Control Technique

Planning and Control for a Dynamic Morphing-Wing UAV Using a Vortex Particle Model

Design, Modeling and Control of a Two Flight Mode Capable Single Wing Rotorcraft With Mid-Air Transition Ability

Control Simulation of Flapping-Wing Micro Aerial Vehicle Based on Multi-Level Optimization Model Predictive Control