Abstract:High-performance vertical vibration isolators are required in precision instruments and physical experiments to reduce the seismic noise, which limits the instrument performance and measurement results. For example, inertial references are needed in interferometric gravitational wave detectors and absolute gravimeters, in order to separate the useful signal from noise. Microseisms typically occur at around 0.07 Hz. The secondary microseisms occur at about 0.14 Hz. Buildings usually wobble at frequencies between 0.1 and 1 Hz. To reduce all these vibrations would require a spring-mass system with a resonance frequency lower than 0.05 Hz. The most commonly applied techniques use a passive vertical isolation system, which is easy to set up and cheap to build. However, to achieve low cut-off frequency, such as 0.05 Hz, there requires longer than 100 m static deflection for a simple passive isolator, which is impractical in most applications. An ultra-low-frequency active vertical vibration isolator, based on a two-stage beam structure, is proposed and demonstrated in this paper. Two beams are connected to a frame with flexural pivots. The upper beam is suspended from the frame with a normal hex spring. The lower beam is suspended from the upper one by a zero-length spring. The flexural pivots of the upper beam are not vertically placed above the pivots of the lower beam. With this special design, the attachment points of the zero-length spring to the beams can be moved to change the effective stiffness. A laser reflectometry is used to detect the angle between the two beams. A laser collimator, a mirror, a beam splitter and an optical detector are fixed to the upper beam, and another mirror is fixed to the lower beam. A laser beam from the collimator is directed to the detector via the mirrors and the beam splitter. The output of the detector is proportional to the angle between the two beams. The minimum detectable angle is 36 nrad. The angle signal is sent to a circuit to generate a control signal, which drives a voice coil mounted between the lower beam and the frame to maintain the angle between the two beams to a fixed value. The isolation system can achieve a natural period of 100 s by carefully adjusting the attachment points of the zero-length spring and the feedback parameters. This type of isolator has a simpler and more robust structure than the famous active vibration isolator-the super spring. The system is promising in applications such as precision instruments and experiments, especially in absolute gravimeters.

A low-frequency micro-vibration absorber based on a designable quasi-zero stiffness beam

Suppressing Random Response of a Regular Structure by an Inerter-Based Dynamic Vibration Absorber

Minimization of the Beam Response Using Inerter-Based Passive Vibration Control Configurations

An Acoustic Black Hole Absorber for Rail Vibration Suppression: Simulation and Full-Scale Experiment

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Design of broad quasi-zero stiffness platform metamaterials for vibration isolation

Inverse-designed metastructures with customizable low dynamic stiffness characteristics for low-frequency vibration isolation

Ultra-Low-Frequency Vertical Vibration Isolator Based on A Two-Stage Beam Structure

Research on a nonlinear quasi-zero stiffness vibration isolator with a vibration absorber

Time-Delayed Feedback Control Design and Its Application for Vibration Absorption.

Optimal design of DVA-beam system by simultaneously optimizing DVA position, mass, damping and stiffness using Particle Swarm optimization

Research on flexible beam-type nonlinear vibration isolators suitable for low frequencies

A DVA-Beam Element for Dynamic Simulation of DVA-Beam System: Modeling, Validation and Application

A metamaterial beam with inverse nonlinearity for broadband micro-vibration attenuation

Micro-vibration suppression of equipment supported on a floor incorporating magneto-rheological elastomer core

Theoretical and experimental investigations on semi-active quasi-zero-stiffness dynamic vibration absorber

Study on Mechanical Adaptive Tuned Vibration Absorber

MICRO-VIBRATION SUPPRESSION OF EQUIPMENT SUPPORTED ON A SANDWICH BEAM INCORPORATING MAGNETO-RHEOLOGICAL ELASTOMER (MRE) CORE

Quasi-zero stiffness vibration isolators with slender Euler beams as positive stiffness elements

A Ball-Contacting Dynamic Vibration Absorber with Adjustable Stiffness and Nonlinear Characteristics

A novel periodic beam with multilayer acoustic black holes for deep sub-wavelength vibration attenuation