Abstract:Pyrolysis of biomass residues into biochar is seen as a feasible way to mitigate climate change by biological carbon storage (carbon dioxide removal, CDR) and to substitute fossil fuel with sustainable biofuel. This study applies a combination of flash and ramp heating pyrolysis, and organic petrography to investigate the hydrocarbon (biofuel) potential and biochar stability and morphotypes of eight brown, red, and green macroalgal species of different tissue complexity. The carbon stability of biochar derived from macroalgae has not previously been assessed using organic petrography (reflectance measurements) and evaluated in the context of the geological carbon cycle. The biochar, hydrocarbon, and CO + CO 2 yields vary due to different chemical composition of the macroalgal species, but the product yield variations are not related to the brown, red, or green macroalgal groups. The total biofuel yield shows an inverse trend with biochar yield. A slower heating rate produces more biochar and higher CO + CO 2 and lower biofuel yields than the combined flash pyrolysis and faster heating rate. The morphotype composition of the biochar was qualitatively examined by reflected light microscopy while carbon stability was assessed by random reflectance (R o ) measurements. The diverse morphotype compositions observed in biochar formed under similar pyrolysis conditions likely stem from variations in the original algal composition. While some biochar samples show morphologies resembling the original macroalgal structure, porous morphotypes predominantly characterize the biochar samples overall. Despite a maximum pyrolysis production temperature (PT) of 650 °C, the highest mean R o value among all biochar samples is 2.91%, corresponding to a carbonization temperature (CT) of 526 °C. This observation tentatively suggests the less lignocellulosic structure of the macroalgae compared to terrigenous biomass. Four biochar samples have their entire R o distribution range above the inertinite benchmark (IBR o 2%) of R o = 2% indicating high carbon stability. Conversely, the remaining four biochar samples exhibit R o distributions extending below IBR o 2%, indicating the presence of a carbon fraction with lower long-term stability in soil. The statistically significant inverse relationship observed between the mean R o values and the peak hydrocarbon generation temperature (T max ) can be attributed to the behavior of residual macromolecules within the biochar. When these macromolecules reach peak biofuel generation at a lower temperature, they undergo carbonization over a more extended time interval during pyrolysis. Consequently, this prolonged exposure to the pyrolysis process leads to higher degrees of carbonization, as reflected by higher R o values. In conclusion, the findings from pyrolysis and organic petrographic reveal: (1) Macroalgae demonstrate potential for biofuel production, although biofuel yields contingent upon both the species of macroalgal and the heating rate employed, and (2) This study documents for the first time that flash+ramp pyrolysis of macroalgae yields biochar suitable for long-term carbon storage. However, both the carbon stability inferred from R o frequency distributions and biochar yields show variations across different macroalgal species and heating rate.

Comparative Evaluation of Pyrolysis and Hydrothermal Liquefaction for Obtaining Biofuel from a Sustainable Consortium of Microalgae Arthrospira platensis with Heterotrophic Bacteria

Fast Pyrolysis of Microalgae Remnants in a Fluidized Bed Reactor for Bio-Oil and Biochar Production

Hydrothermal liquefaction of microalgae to produce biofuels: state of the art and future prospects

The hydrothermal liquefaction as a promising procedure for microalgae-to-biofuel conversion: A general review and some thermophysical problems to be solved

Microalgae bio-oil production by pyrolysis and hydrothermal liquefaction: Mechanism and characteristics

Life-cycle assessment of microalgae liquid biofuel production in biofilm cultivation system via conversion technologies of transesterification, hydrothermal liquefaction and pyrolysis

Catalytic Pyrolysis of Microalgae for Production of Aromatics and Ammonia

State of art review on conventional and advanced pyrolysis of macroalgae and microalgae for biochar, bio-oil and bio-syngas production

Catalytic hydrothermal liquefaction of microalgae over different biochars

Co-pyrolysis of microalgae and other biomass wastes for the production of high-quality bio-oil: Progress and prospective

On the pyrolysis of different microalgae species in a conical spouted bed reactor: Bio-fuel yields and characterization

Pyrolysis of Algal Biomass: Determination of the Kinetic Triplet and Thermodynamic Analysis.

Fast Pyrolysis of Microalgae to Produce Renewable Fuels

Pyrolysis of macroalgae: Insight into product yields and biochar morphology and stability

Characterization and pyrolysis of Chlorella vulgaris and Arthrospira platensis: potential of bio-oil and chemical production by Py-GC/MS analysis

Biofuel from wastewater-grown microalgae: A biorefinery approach using hydrothermal liquefaction and catalyst upgrading

In situ and Ex situ Catalytic Pyrolysis of Microalgae and Integration With Pyrolytic Fractionation

High yield bio-oil production from fast pyrolysis by metabolic controlling of Chlorella protothecoides.

Production and characterization of bio-oil from hydrothermal liquefaction of microalgae Dunaliella tertiolecta cake

Pyrolysis of De-Fatted Microalgae Residue: A Study on Thermal-Kinetics, Products’ Optimization, and Neural Network Modelling

Catalytic co-pyrolysis and kinetic study of microalgae biomass with solid waste feedstock for sustainable biofuel production