Abstract:In this paper, a feedback control mechanism and its optimization for rotating disk vibration/flutter via changes of air-coupled pressure generated using piezoelectric patch actuators are studied. A thin disk rotates in an enclosure, which is equipped with a feedback control loop consisting of a micro-sensor, a signal processor, a power amplifier, and several piezoelectric (PZT) actuator patches distributed on the cover of the enclosure. The actuator patches are mounted on the inner or the outer surfaces of the enclosure to produce necessary control force required through the airflow around the disk. The control mechanism for rotating disk flutter using enclosure surfaces bonded with sensors and piezoelectric actuators is thoroughly studied through analytical simulations. The sensor output is used to determine the amount of input to the actuator for controlling the response of the disk in a closed loop configuration. The dynamic stability of the disk-enclosure system, together with the feedback control loop, is analyzed as a complex eigenvalue problem, which is solved using Galerkin’s discretization procedure. The results show that the disk flutter can be reduced effectively with proper configurations of the control gain and the phase shift through the actuations of PZT patches. The effectiveness of different feedback control methods in altering system characteristics and system response has been investigated. The control capability, in terms of control gain, phase shift, and especially the physical configuration of actuator patches, are also evaluated by calculating the complex eigenvalues and the maximum displacement produced by the actuators. To achieve a optimal control performance, sizes, positions and shapes of PZT patches used need to be optimized and such optimization has been achieved through numerical simulations.

Topology optimization of piezoelectric sensor and actuator layers for active vibration control

OPTIMAL PLACEMENT OF PIEZOELECTRIC TORSIONAL ACTUATOR/SENSOR BASED ON SMART BAR

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Topology optimization of piezoelectric actuators using moving morphable void method

Multi-mode Vibration Averagely Control for Cylindrical Shells by Optimally Distributed Piezoelectric Sensors and Actuators

Actuator Placement Optimization For Piezothermoelectric Biotic Thermal Robust Structure

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

Integrated Development of a Topology-Optimized Compliant Mechanism for Precise Positioning

Concurrent topology optimization of multiscale piezoelectric actuators

Vibration Control of Toroidal Shells with Parallel and Diagonal Piezoelectric Actuators

Distributed Modal Identification and Vibration Control of Continua: Piezoelectric Finite Element Formulation and Analysis

Concurrent optimization of actuator/sensor layout and control parameter on piezoelectric curved shells with active vibration control for minimizing transient noise

A Methodology for Topology Optimization Based on Level Set Method and Its Application to Piezoelectric Energy Harvester Design

Optimal Distribution Of Actuator/Sensor In Piezothermoelectric Intelligent Structure

Optimization of Sensing and Feedback Control for Vibration/Flutter of Rotating Disk by PZT Actuators Via Air Coupled Pressure

Material microstructure topology optimization of piezoelectric composite beam under initial disturbance for vibration suppression

Dynamics and Distributed Vibration Controls of Flexible Manipulators; Integrated Distributed Sensing and Active Piezoelectric Actuator

Nonlinear Control of Hybrid Electrostrictive/Piezoelectric Polymeric Structures: Theory and Experiment

A Study of Segmentation of Distributed Piezoelectric Sensors and Actuators, Part II: Parametric Study and Active Vibration Controls

Vibration Control of Plates Using Discretely Distributed Piezoelectric Quasi-Modal Actuators/sensors

Topology optimization for minimizing frequency response of constrained layer damping plates