Abstract:In this study, both the optical and piezoelectric properties of polyvinylidene fluoride (PVDF) electrospun nanofibers were investigated at different needle-to-collector distances of the electrospinning process at constant applied high voltage. For piezoelectric characterization, the fabricated nanofiber mats were subjected to applied forces, including cyclic force, variable frequency-based loads, and free-falling masses (impulse loading), along with power density analysis for different load resistance values. In addition, both optical absorbance and transmittance measurements were conducted to evaluate the optical properties of the fabricated nanofibers. The piezoelectric analysis demonstrated the best piezoresponse of the fabricated nanomats at a needle-to-collector distance of 15 cm and high voltage of 22 kV. However, a trade-off between piezoelectric response and optical transmissivity was observed based on the electrospinning distance parameter. The relatively higher optically transparent sample exhibited only moderate piezoelectric response, while the less transparent sample displayed the highest piezoelectric activity. Based on the optimized sample and piezoelectric analysis, the synthesized nanofiber mat was subjected to applied mechanical stress in the form of variable velocity and momentum loads. A maximum potential of approximately 16 V was harvested through velocity and momentum impact, especially with the addition of a double-layer PVDF membrane. Furthermore, the sensing effect of airflow pressure on single/double-layer PVDF was studied. The single-layer PVDF membrane generated 79 mV under an airflow speed of 21 km/h, while the double-layer membrane produced 114 mV potential under the same airflow. This study highlights the diverse applications of PVDF nanofiber mats as multifunctional sensors and energy harvesting applications from mechanical shocks and airflow impact.

Analysis of electrospinning and additive effect on β phase content of electrospun PVDF nanofiber mats for piezoelectric energy harvester nanogenerators

Electrospun PVDF Nanofibers for Piezoelectric Applications: A Review of the Influence of Electrospinning Parameters on the β Phase and Crystallinity Enhancement

A novel centrifugal electrospinning design for preparing of high alignment β -phase PVDF nanofibers for high-performance piezoelectric nanogenerators

Enhancing the piezoelectric performance of composite PVDF flexible films through optimizing β phase content, investigating additive effects, step‐wise polarization, and thermal pressing time for energy harvesting applications

Characterization of β-PVDF-based nanogenerators along with Fe2O3 NPs for piezoelectric energy harvesting

Triboelectric Nanogenerator-Based Near-Field Electrospinning System for Optimizing PVDF Fibers with High Piezoelectric Performance

Piezoelectric Performance of Aligned PVDF Nanofibers Fabricated by Electrospinning and Mechanical Spinning

Piezoelectric Energy Harvesting Using Flexible Self-Poled Electroactive Nanofabrics Based on PVDF/ZnO-Decorated SWCNT Nanocomposites

Piezoelectric and Optoelectronic Properties of Electrospinning Hybrid PVDF and ZnO Nanofibers

Physico-chemical and piezoelectric characterization of electroactive nanofabrics based on functionalized graphene/talc nanolayers/PVDF for energy harvesting

A Review of Piezoelectric PVDF Film by Electrospinning and Its Applications

Enhanced piezoelectric performance of aligned PVDF electrospun fiber mats

Boosting piezoelectric properties of PVDF nanofibers via embedded graphene oxide nanosheets

Effect of multilayer fabrication of PVDF/PZT fibers on output performance in piezoelectric nanogenerator (PEN)

Enhanced Piezoelectric Performance of Various Electrospun PVDF Nanofibers and Related Self-Powered Device Applications

Enhancement of piezoelectric energy-harvesting capacity of electrospun β-PVDF nanogenerators by adding GO and rGO

Parametric Study on PVDF Electrospun Nanofibers: Optical Characteristics, Piezoelectric Analysis, and Correlated Applications

β-Phase Enhancement of Force Spun Composite Nanofibers for Sensing Applications

Piezoelectric Nanogenerator Based on Electrospinning PVDF/Cellulose Acetate Composite Membranes for Energy Harvesting

Approaches for Increasing the Β-Phase Concentration of Electrospun Polyvinylidene Fluoride (PVDF) Nanofibers