Abstract:Pitting damage severely degrades the mechanical properties of the main force-bearing member of a circular tube; it can also change its failure mode. Offshore high-strength seamless steel pipes with steel grade X52Q certified by ABS were selected for a pressure test and research. The constraint conditions of one hinged end and one fixed end were adopted to investigate the effect of the bending moment of the nodes so that any section of the circular tube can be subjected to the superposition of axial force and bending moment. Pitting craters were generated using mechanical processing methods; the effect of pitting parameters such as diameter, depth, and distribution on the mechanical properties and failure modes of circular pipes was explored. Pitting corrosion damage caused local stress concentration and the local cross-section weakening of the tube. In addition to the decline of the bearing capacity under the action of axial compression load, the failure mode of the pitting corrosion damage tube also showed differences. Increased local damage caused by the increase in the diameter of the pitting corrosion was likely to cause plastic hinges on the pits of the tube, and this changed stress conditions, failure modes, and failure locations of the components. An increase in the depth of the pitting craters resulted in a significant drop in the overall load-bearing capacity caused by local buckling. The location of pitting corrosion had negligible effect on the mechanical performance of the tube; the end distribution was more unfavourable than the centre distribution. The stress–strain distribution characteristics of the pitting area of the specimen were considerably different, and the stress concentration on the inner side of the pitting corrosion were serious and uneven. The results of the experimental analysis and several numerical examples indicated that pitting corrosion causes the pressure-bearing circular pipes with lower strength buckling to more likely suffer from an instability failure.

Assessing the efficacy of non-destructive testing methods to detect pitting corrosion

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Reliability of non-destructive test techniques in the inspection of pipelines used in the oil industry

Quantitative Evaluation of Pit Sizes for High Strength Steel: Electrochemical Noise, 3-D Measurement, and Image-Recognition-based Statistical Analysis

Non-destructive detection of lack of penetration defects in friction stir welds

Nondestructive Testing for Corrosion Evaluation of Metal under Coating

Comparison on Pipeline Welds and Integrity Through Different Electromagnetic NDT Techniques.

Automated ex-situ detection of pitting corrosion and its effect on the mechanical integrity of rare earth magnesium alloy - WE43

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Corrosion assessment of ductile iron pipes using high-speed camera technique: Microstructural validation

Pipeline In-Line Inspection Method, Instrumentation and Data Management

Modelling and experimental study on pipeline defect characterisations using a pulsed eddy current measurement

NONDESTRUCTIVE TESTING TECHNIQUE FOR CRACKS IN LONG-DISTANCE NATURAL GAS PIPELINES

Non-intrusive Internal Corrosion Characterization using the Potential Drop Technique for Electrical Mapping and Machine Learning

Localization and evaluation of subsurface pits in copper pipes using gradient-field pulsed eddy current inspection

An Electromechanical Impedance-Based Sensor for Monitoring the Pitting Corrosion of Steel: Simulation with Experimental Validation

In-Line Nondestructive Inspection of Mechanical Dents on Pipelines With Guided Shear Horizontal Wave Electromagnetic Acoustic Transducers

Classification and Sizing of Surface Defects in Pipelines Based on the Results of Combined Diagnostics by Ultrasonic, Eddy Current, and Visual Inspection Methods of Nondestructive Testing

Experimental study on the compression mechanical behaviour of steel pipes with mechanically induced pitting corrosion

A Method Using Magnetic Eddy Current Testing for Distinguishing ID and OD Defects of Pipelines under Saturation Magnetization

Novel design of an effective pneumatic magnetostrictive patch transducer based on the ultrasonic guided wave for application of fast pipe health inspection