Experimental Study of an Eco-friendly Turning Process of Nimonic 75 Combining Minimum Quantity Lubrication and Hexagonal Boron Nitride-Enhanced Neem and Jatropha Oil Nanofluids

Venkatesan Kannan

DOI: https://doi.org/10.1007/s40032-022-00816-w

2022-05-08

Journal of The Institution of Engineers (India): Series C

Abstract:Minimum quantity lubrication (MQL) applies to hard-to-turn materials (HTM) in the turning practice as an environmentally sound and provides a solution for adequate lubrication and cooling. However, the performance characteristics of HTM directly affect the serviceability and, hence, assess the turning features while MQL is very important. In this context, the present study investigates the application potential of nano-hexagonal boron nitride (nhBN)-dispersed neem and jatropha oil as cutting fluids in the MQL machining of Nimonic 75 superalloy. In doing so, an overall 20 cutting conditions based on the central composite rotatable design (CCD) are tested, including dry, two different concentrated levels, and turning speed and rate of feed. Furthermore, two nanofluids' influence mechanism in sustainable performance measures concerning the roughness, force, wear width, chip thickness, chip thickness ration, saw-tooth distance, friction coefficient, and shear-angle is studied. The examination results from nhBN in MQL machining are better in terms of cutting force (23% and 12.2%), roughness (25.13% and 50%), tool wear (18.9% and 11.4%), average chip length (21.3% and 12.0%), the ratio of chip thickness (23.2% and 17.6%), coefficient of friction (40.8% and 28.2%), and shear angle (14.8%and 10.1%) than dry machining. 0.50 wt.% of nhBN is determined as an optimal mixture for both nanofluids. The research findings show that the 0.50 wt.% nhBN + neem nanofluids exhibit a significant improvement in the machining characteristics (4.14% for cutting force, 37.6% for roughness, 7.22% for tool wear, 17% for average pitch length, 4.15% for chip thickness ratio, 18.7% for frictional coefficient, and 9.3% for shear angle) as compared to jatropha oil. Further, it delivers the new bias for put on the nhBN to the MQL for the chip removal process.