Application of two-stage nitritation/anammox using activated sludge immobilized on polyvinyl alcohol/alginate with addition of foaming agent: Pilot-scale study

Daehee Choi,Jinyoung Jung
DOI: https://doi.org/10.1016/j.jwpe.2022.102921
IF: 7
2022-06-18
Journal of Water Process Engineering
Abstract:The non-porous structure of the outer layer in the existing polyvinyl alcohol (PVA)/alginate carrier lowered the stability and efficiency of the partial nitritation/anammox (PN/A) process. In this study, these drawbacks could be improved with the addition of a foaming agent, and the effect was evaluated in a two-step PN/A process on a pilot scale. The penetration efficiency for dissolved oxygen was a parameter for determining the optimal content of the foaming agent, and it could be determined as 0.3% w / v . In the pilot PN, the DO diffusion inside the PVA/alginate carrier was effective for selective nitrite oxidizing bacteria (NOB) inhibition. As a result, ammonium oxidation efficiency of 49.3 ± 2.7% was achieved within 20 d of operation, resulting in a NO 2 − -N/NH 4 + -N ratio of 0.92 ± 0.1 in the effluent. In the pilot anammox, the contribution of endogenous denitrification to nitrogen removal (95.6 ± 2.9%) was a major factor inhibiting the physiological activity of anammox. The strategy of decreasing the hydraulic retention time worked effectively in alleviating the negative impact, which improved the contribution of anammox to nitrogen removal. In addition, this strategy was also worked effective in alleviating the effect of inhibitors on anammox activity under field conditions. With stabilization of nitrogen removal by anammox, exogenous denitrification even contributed to improving nitrogen removal efficiency, and a nitrogen removal rate of 1.1 ± 0.1 kg/m 3 /d was achieved at an influent nitrogen load of 1.4 ± 0.1 kg/m 3 /d.
engineering, chemical, environmental,water resources
What problem does this paper attempt to address?