Abstract:Micro‐CT analysis flow of the femoral head necrosis specimen 5‐years after internal fixation for femoral neck fracture. (A) Five typical slices. Scanning along the direction of the implants placement for femoral neck fracture with a layer of 20 μm, approximately 1500 scans per femoral head. Each femoral head was approximately scanned to obtain 1500 images; (B) Schematic diagram of the region delineation of interest in each layer. The central slice of the middle screw path is used as an example, and is divided into the sclerosis region (SR‐red), screw path (SP), relatively normal region (RNR‐yellow) and necrotic collapsed region (NCR‐blue). Objective To analyze necrotic femoral head after long‐term internal fixation for femoral neck fractures using micro‐computed tomography (CT) for bone histomorphometry. Methods The experimental group included six patients (two men and four women; mean age 62.00 ± 9.36 years) who underwent hip arthroplasty at 47.67 ± 14.22 months after internal fixation. Surgery was performed because of femoral head necrosis after femoral neck fracture between October 2018 and October 2020. The control group included three patients (two men and one woman; mean age 69.33 ± 4.62 years) who underwent hip arthroplasty for femoral neck fracture. In the experimental group, micro‐CT quantitative analysis of the whole femur, sclerotic region around screws, screw paths, sclerotic region and screw paths, and relatively normal region was performed. The bone volume fraction (BV/TV), number of bone trabeculae (Tb.N), connection density (Conn.D), thickness of bone trabeculae (Tb.Th), separation of bone trabeculae (Tb.SP), structural model index (SMI), and bone mineral density (BMD) of each part were quantitatively analyzed. Results The BV/TV (0.3180 ± 0.0617), Conn.D (6.9261 ± 2.4715/mm3), Tb.Th (0.3262 ± 0.0136 μm), and BMD (298.9241 ± 54.2029 g/cm3) of the sclerotic region around the screws were significantly higher in the experimental group than the BV/TV (0.1248 ± 0.0390), Conn.D (2.5708 ± 0.5187/mm3), Tb.Th (0.1713 ± 0.0333 μm), and BMD (66.5181 ± 43.0380 g/cm3) in the control group (P

Micro‐Computed Tomography Analysis of Femoral Head Necrosis After Long‐Term Internal Fixation for Femoral Neck Fracture