Wet Storage Effects on Fly Ash Properties Relevant to its Use in Air-entrained Concrete

Michael J. McCarthy,Thomas A. Hope,Laszlo J. Csetenyi,M.J. McCarthy,T.A. Hope,L.J. Csetenyi

DOI: https://doi.org/10.1680/jmacr.21.00070

IF: 2.46

2022-07-27

Magazine of Concrete Research

Abstract:With the retirement of coal-fired power stations, wet stored stockpile fly ash is increasingly being considered for use in concrete. A key property of dry fly ash in this application is air entrainment, which can be affected by unburnt carbon present, influencing bubble stability and air-entraining admixture (AEA) dose requirements. Preliminary tests suggest wet storage can influence the process and the study examined this for laboratory-moistened and stockpile fly ashes. The research indicated that chemical processes lead to product formation on particle surfaces and increases in loss-on-ignition in the material. Agglomeration of fly ash also occurred with wet storage, developing with time. While median particle size and specific surface area by N 2 adsorption of fly ash increased, both foam index and Acid Blue 80 adsorption were less with wet storage. Mortar tests gave increased air content at fixed AEA dose for material held under these conditions. Further experiments suggest admixture accessibility to wet stored fly ash particles influenced behaviour and this increased with the breakdown of particle agglomerates (by grinding). Minor influences of particle surface chemistry on the process were also evident. A pilot-scale processing trial with stockpile fly ash gave general agreement with effects observed in the laboratory.

construction & building technology,materials science, multidisciplinary