Abstract:To solve the problem of black ice, many studies are being carried out. The key in recent days is enhancing the thermal conductivity of concrete. In this study, to improve the thermal conductivity, silicon carbide was used to substitute 50% and 100% of the fine aggregate. In addition, steel fiber is not only for enhancing the mechanical properties but could enhance thermal conductive material. Hence, the arched-type steel fiber was used up to a 1% volume fraction in this study. Furthermore, graphite was used for 5% of the volume fraction for enhancing the thermal conductivity. However, thermal damage would occur due to the difference in thermal conductivity between materials. Therefore, the thermal durability must be verified first. The target application of the concrete in this study was its use as road paving material. To evaluate the thermal durability, freeze–thaw and rapid cyclic thermal attacks were performed. The thermal conductivity of the specimens was increased with the increase in thermal conductive materials. Graphite has already been reported to have a negative effect on mechanical properties, and the results showed that this was the case. However, the steel fiber compensated for the negative effect of graphite, and the silicon carbide provided a filler effect. Graphite also had a negative effect on the freeze–thaw and rapid cyclic thermal attack, but the steel fiber compensated for the reduction in thermal durability. The silicon carbide also helped to improve the thermal durability in the same way as steel fiber. Comprehensively, the steel fiber enhanced all of the properties of the tests. Using 100% silicon carbide was considered the acceptable range, but 50% of silicon carbide was the best. Graphite decreased all the properties except for the thermal conductivity. Therefore, the content of graphite or using other conductive materials used should be carefully considered in further studies.

Heating Performance of Cementitious Composites with Carbon-Based Nanomaterials

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Electrical Resistivity and Joule Heating Characteristics of Cementitious Composites Incorporating Multi-Walled Carbon Nanotubes and Carbon Fibers

The combined effect of carbon fiber and carbon nanotubes on the electrical and self-heating properties of cement composites

Electrical Conductivity of Cementitious Composites Mixed with Carbon-Based Nanomaterials Used as a Construction Material

Performance of carbon nanomaterials incorporated with concrete exposed to high temperature

Achieving thermoelectric properties of ultra-high-performance concrete using carbon nanotubes and fibers

Prediction and evaluation of thermal conductivity in nanomaterial-reinforced cementitious composites

Preparation of carbon fiber conductive concrete and study on its mechanical and heating properties

Experimental Investigation of Road Snow-Melting Based on CNFP Self-Heating Concrete

Effect of carbonation curing regime on electric heating performance of CNT/cement composites

Independent Heating Performances in the Sub-Zero Environment of MWCNT/PDMS Composite with Low Electron-Tunneling Energy

Self-heating characteristics of electrically conductive cement composites with carbon black and carbon fiber

Mechanism of MWCNT on the Performance of Concrete from the Perspective of Thermal Stability

Enhanced electrical heating capability of CNT-embedded cementitious composites exposed to water ingress with addition of silica aerogel

Effects of Thermal Conductive Materials on the Freeze-Thaw Resistance of Concrete

Construction of new conductive networks for expandable graphite-based cement composites via a facile heat treatment process

High-performance cementitious composites containing nanostructured carbon additives made from charred coal fines

The Influence of Nanomaterials on the Thermal Resistance of Cement-Based Composites—A Review

Ohmic heating curing of electrically conductive carbon nanofiber/cement-based composites to avoid frost damage under severely low temperature

Experimental study on physical and mechanical properties and micro mechanism of carbon nanotubes cement-based composites